Site‐selective chemical‐vapor‐deposition of submicron‐wide conducting polypyrrole films: Morphological investigations with the scanning electron and the atomic force microscope

Dipartimento di Ingegneria dell'Informazione, Elettronica, Informatica, Telecomunicazioni, Via Diotisalvi 2, 156126, Pisa (I), Italy
Journal of Applied Physics (Impact Factor: 2.18). 08/1996; 80(1):70 - 75. DOI: 10.1063/1.362772
Source: IEEE Xplore


We report morphological investigations of polypyrrole thin films deposited by means of a self‐aligning vapor phase technique onto glass, silicon and silicon dioxide substrates, coated with an oxidizing precursor. The variation of the deposition parameters allows the control of the film microstructure which can be fibrillar and strongly anisotropic or globular and tendentially isotropic. Patterning of the precursor by electron‐beam lithography allows the production of submicron wide lines as shown by both the scanning electron microscope and the atomic force microscope. © 1996 American Institute of Physics.

Download full-text


Available from: Franco Cacialli, Dec 14, 2013

  • No preview · Article · Jul 1999 · Advanced Materials
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: The coating of different materials with conducting electroactive polymers (CEP), i.e. polyaniline, polypyrrole, polythiophene, and their derivatives, provided by means of chemical polymerization, is briefly reviewed. The topics covered include the deposition of CEP (i) by bulk oxidative chemical polymerization, (ii) by surface-located polymerization, and (iii) by coating of micro- and nanoparticles. The coating of different materials like polymers, polymer particles, ion-exchange membranes, glass, fiber, textile, soluble matrices, inorganic materials is reviewed. The literature reviewed covers a 5-year period, beginning from 1995.
    Preview · Article · Apr 2001 · Polymer
  • Source
    [Show abstract] [Hide abstract]
    ABSTRACT: We report the fabrication of poly(p-phenylene vinylene) nanostructures by direct scanning near-field lithography of its soluble precursor. The technique is based on the spatially selective inhibition of the precursor solubility by exposure to the ultraviolet optical field present at the apex of scanning near-field fiber probes with aperture diameters between 40 and 80 nm (±5 nm). After development in methanol and thermal conversion under vacuum we obtain features with a minimum dimension of 160 nm. We demonstrate the use of the technique for the direct writing of two-dimensional photonic crystals with intentional defects and a periodicity relevant to applications in the visible range. Using a Bethe–Bouwkamp model, we then discuss the influence of probe size, tip-sample distance, and film thickness on the resolution of the lithographic process. We also discuss limitations to the resolution that can arise from physical properties of the lithographic medium.
    Full-text · Article · Jan 2003 · Applied Physics Letters
Show more