Single Event Transients in Logic Circuits—Load and Propagation Induced Pulse Broadening

Dept. de Eng. Eletr., UFRGS, Porto Alegre
IEEE Transactions on Nuclear Science (Impact Factor: 1.28). 01/2009; 55(6):2928 - 2935. DOI: 10.1109/TNS.2008.2006265
Source: IEEE Xplore


The generation and propagation of single event transients (SET) in logic gate chains is studied and modeled. Regarding SET generation, we investigate the dependence of the generated SET pulse width on the struck node capacitance. Rising node capacitance may lead to amplified pulse width, indicating that increasing load capacitance alone is not an option for radiation hardening. SET propagation in logic chains is also studied, and it is shown that significant broadening or attenuation of the propagated transient pulse width may be observed. It is shown that the chain design (propagation delay of high to low and low to high transitions) has a major impact on broadening or attenuation of the propagated transient pulse. For the first time a suitable model for SET broadening is provided.

Download full-text


Available from: Fernanda Lima Kastensmidt, Aug 10, 2015
  • Source
    • ") " MUX " is based on a multiplexer (MUX) [6]. 3) " 12TI " is the 12-transistor implementation of voting function (1) [4] [5]. This voter has inverted output. "
    [Show abstract] [Hide abstract]
    ABSTRACT: We study the design of different majority voters based on a commercial 65 nm CMOS technology, propose the test system and discuss the experimental results of heavy ion irradiation campaign and the proposed relative efficiency criterion for choosing the voter for a given TMR strategy.
    Full-text · Article · Aug 2014 · IEEE Transactions on Nuclear Science
  • Source
    • "Radiations in the atmosphere are responsible for introducing Single Event Upsets (SEU) and Single Event Transients (SET) in digital devices [4], [5]. SEUs have particularly adverse effects on FPGAs using SRAM technology, as they may alter a bit in the configuration memory, causing a permanent fault (correctable only with a reconfiguration of the device) [6]. "
    [Show abstract] [Hide abstract]
    ABSTRACT: SRAM-FPGA systems are simulated with a model based on the Stochastic Activity Networks (SAN) formalism. Faults are injected into the model and their propagation is traced to the output pins using a four-valued logic that enables faulty logical signals to be tagged and recognized without recurring to a comparison with the expected output values. Input vectors are generated probabilistically based on assumed signal probabilities. By this procedure it is possible to obtain a statistical assessment of the observability of different faults for the generated inputs. The analysis of a 2-out-of-2 voter is shown as a case study.
    Full-text · Article · Jan 2011
  • Source
    • "SET (Single Event Transient) propagation in an Integrated Circuit has been already studied from different points of view. In [1] an analysis of a chain of inverters considering different gate output load is done. Another approach considering fluctuations of the power supply voltage is made in [2], among many others. "
    [Show abstract] [Hide abstract]
    ABSTRACT: Propagation induced pulse broadening (PIPB) effect is becoming a major concern for electronic designers since new technologies are fast enough to propagate and capture Single Event Transients (SET). In this paper, we explore the influence of the MOSFET threshold voltage (V<sub>T</sub>) on PIPB effect by TCAD simulating the propagation of an SET after an ion strike, showing up this dependence by the modification of some CMOS technology parameters affecting V<sub>T</sub>. For this work, the test vehicle used to measure PIPB effect is a self-feedback chain of CMOS inverters. The conclusions outlined can be useful when designing with Multi-Vt nano-metric CMOS technologies. Our results suggest that the |V<sub>T</sub>|/V<sub>DD</sub> ratio could be a figure of merit for SET propagation broadening.
    Full-text · Article · Sep 2010 · IEEE Transactions on Nuclear Science
Show more