ArticlePDF Available

Abstract

Traditional engineering instruction is deductive, beginning with theories and progressing to the applications of those theories. Alternative teaching approaches are more inductive. Topics are introduced by presenting specific observations, case studies or problems, and theories are taught or the students are helped to discover them only after the need to know them has been established. This study reviews several of the most commonly used inductive teaching methods, including inquiry learning, problem-based learning, project-based learning, case-based teaching, discovery learning, and just-in-time teaching. The paper defines each method, highlights commonalities and specific differences, and reviews research on the effectiveness of the methods. While the strength of the evidence varies from one method to another, inductive methods are consistently found to be at least equal to, and in general more effective than, traditional deductive methods for achieving a broad range of learning outcomes.
1
INDUCTIVE TEACHING AND LEARNING METHODS:
DEFINITIONS, COMPARISONS, AND RESEARCH BASES*
Michael J. Prince
Bucknell University
Richard M. Felder
North Carolina State University
To state a theorem and then to show examples of it is literally to teach backwards.
(E. Kim Nebeuts)
ABSTRACT
Traditional engineering instruction is deductive, beginning with theories and progressing to
applications of those theories. Alternative teaching approaches are more inductive. Topics are
introduced by presenting specific observations, case studies or problems, and theories are taught
or the students are helped to discover them only after the need to know them has been
established. This study reviews several of the most commonly used inductive teaching methods,
including inquiry learning, problem-based learning, project-based learning, case-based teaching,
discovery learning, and just-in-time teaching. The paper defines each method, highlights
commonalities and specific differences, and reviews research on the effectiveness of the
methods. While the strength of the evidence varies from one method to another, inductive
methods are consistently found to be at least equal to, and in general more effective than,
traditional deductive methods for achieving a broad range of learning outcomes.
I. INTRODUCTION
A. Two Approaches to Education
Engineering and science are traditionally taught deductive ly. The instructor introduces a topic by
lecturing on general principles, then uses the principles to derive mathematical models, shows
illustrative applications of the models, gives students practice in similar derivations and
applications in homework, and finally tests their ability to do the same sorts of things on exams.
Little or no attention is initially paid to the question of why any of that is being donewhat real-
world phenomena can the models explain, what practical problems can they be used to solve, and
why the students should care about any of it. The only motivation to learn that students getif
they get any at allis suggestions that the material will be important later in the curriculum or in
their careers.
A well-established precept of educational psychology is that people are most strongly
motivated to learn things they clearly perceive a need to know [1]. Simply telling students that
they will need certain knowledge and skills some day is not a particularly effective motivator. A
preferable alternative is inductive teaching and learning. Instead of beginning with general
principles and eventually getting to applications, the instruction begins with specificsa set of
observations or experimental data to interpret, a case study to analyze, or a complex real-world
problem to solve. As the students attempt to analyze the data or scenario or solve the problem,
* J. Engr. Education, 95(2), 123138 (2006).
2
they generate a need for facts, rules, procedures, and guiding principles, at which point they are
either presented with the needed information or helped to discover it for themselves.
Inductive teaching and learning is an umbrella term that encompasses a range of
instructional methods, including inquiry learning, problem-based learning, project-based
learning, case-based teaching, discovery learning, and just-in-time teaching. These methods have
many features in common, besides the fact that they all qualify as inductive. They are all learner-
centered (aka student-centered), meaning that they impose more responsibility on students for
their own learning than the traditional lecture-based deductive approach does. They are all
supported by research findings that students learn by fitting new information into existing
cognitive structures and are unlikely to learn if the information has few apparent connections to
what they already know and believe. They can all be characterized as constructivist methods,
building on the widely accepted principle that students construct their own versions of reality
rather than simply absorbing versions presented by their teachers. The methods almost always
involve students discussing questions and solving problems in class (active learning), with much
of the work in and out of class being done by students working in groups (collaborative or
cooperative learning). The defining characteristics of the methods and features that most of them
share are summarized in Table 1.
Table 1. Features of Common Inductive Instructional Methods
Method à
Feature
Inquiry
Problem-
based
Project-
based
Case-
based
Discovery
JiTT
Questions or problems provide context for learning 1 2 2 2 2 2
Complex, ill-structured, open-ended real-world
problems provide context for learning 4 1 3 2 4 4
Major projects provide context for learning 4 4 1 3 4 4
Case studies provide context for learning 4 4 4 1 4 4
Students discover course content for themselves 2 2 2 3 1 2
Students complete & submit conceptual exercises
electronically; instructor adjusts lessons according to
their responses
4
4
4
4
4
1
Primarily self-directed learning 4 3 3 3 2 4
Active learning 2 2 2 2 2 2
Collaborative/cooperative (team-based) learning 4 3 3 4 4 4
1 by definition, 2 always, 3 usually, 4 possibly
There are also differences among the different inductive methods. The end product of a
project-based assignment is typically a formal written and/or oral report, while the end product
of a guided inquiry may simply be the answer to an interesting question, such as why an egg
takes longer to boil at a ski resort than at the beach and how frost can form on a night when the
temperature does not drop below freezing. Case-based instruction and problem-based le arning
involve extensive analyses of real or hypothetical scenarios while just-in-time teaching may
simply call on students to answer questions about readings prior to hearing about the content of
3
the readings in lectures. However, the similarities trump the differences, and when variations in
how the methods are implemented are taken into account many of the differences disappear
altogether.
Although we just claimed that inductive methods are essentially variations on a theme,
they do not appear that way in the literature. Each method has its own history, research base,
guidebooks, proponents, and detractors, and a great deal of confusion exists regarding what the
methods are and how they are interrelated. Our objective in this paper is to summarize the
definitions, foundations, similarities, and differences among inductive learning methods and to
review the existing research evidence regarding their effectiveness.
Before we begin our review, we will attempt to clarify two points of confusion that
commonly arise in discussions of inductive methods.
Is inductive learning really inductive?
In practice, neither teaching nor learning is ever purely inductive or deductive. Like the
scientific method, learning invariably involves movement in both directions, with the student
using new observations to infer rules and theories (induction) and then testing the theories by
using them to deduce consequences and applications that can be verified experimentally
(deduction). Good teaching helps students learn to do both. When we speak of inductive
methods, we therefore do not mean total avoidance of lecturing and complete reliance on self-
discovery, but simply teaching in which induction precedes deduction. Except in the most
extreme forms of discovery learning (which we do not advocate for undergraduate instruction),
the instructor still has important roles to play in facilitating learningguiding, encouraging,
clarifying, mediating, and sometimes even lecturing. We agree with Bransford: There are times,
usually after people have first grappled with issues on their own, that `teaching by telling’ can
work extremely well. [2, p. 11]
Are we talking about inductive learning or inductive teaching, or is there no difference?
A common point of semantic confusion associated with inductive methods has to do with
the distinction between teaching and learning. Thus, for example, one hears about problem-based
learning but just-in-time teaching, and both inquiry learning and inquiry-based teaching are
commonly encountered in the literature. There is of course a difference between learning (what
students do) and teaching (what teachers do), but in this paper we will never examine one
without explicitly or implicitly considering the other. The reader should therefore understand that
when we refer to inductive learning or to an inductive instructional method with either
teaching or learning in its name, we are talking about both strategies that an instructor might use
(teaching) and experiences the students might subsequently undergo (learning).
II. FOUNDATIONS OF INDUCTIVE TEACHING AND LEARNING
A. Constructivism
According to the model of education that has dominated higher education for centuries
(positivism), absolute knowledge (objective reality) exists independently of human perception.
The teacher’s job is to transmit this knowledge to the studentslecturing being the natural
method for doing soand the students’ job is to absorb it. An alternative model, constructivism,
4
holds that whether or not there is an objective reality (different constructivist theories take
opposing views on that issue), individuals actively construct and reconstruct their own reality in
an effort to make sense of their experience. New information is filtered through mental structures
(schemata) that incorporate the student’s prior knowledge, beliefs, preconceptions and
misconceptions, prejudices, and fears. If the new information is consistent with those structures it
may be integrated into them, but if it is contradictory, it may be memorized for the exam but is
unlikely to be truly incorporated into the individual’s belief systemwhich is to say, it will not
be learned.
Constructivism has its roots in the 18th-century philosophies of Immanuel Kant and
Giambattista Vico, although some have traced it as far back as the 4th–6th century B.C. in the
works of Lao Tzu, Buddha, and Heraclitus. The constructivist view of learning is reflected in the
developmental theories of Piaget [3], Dewey [4], Bruner [5], and Vygotsky [6], among others. In
cognitive constructivism, which originated primarily in the work of Piaget, an individual’s
reactions to experiences lead to (or fail to lead to) learning. In social constructivism, whose
principal proponent is Vygotsky, language and interactions with othersfamily, peers,
teachersplay a primary role in the construction of meaning from experience. Meaning is not
simply constructed, it is co-constructed.
Proponents of constructivism (e.g., Biggs [7]) offer variations of the following principles
for effective instruction:
Instruction should begin with content and experiences likely to be familiar to the students, so
they can make connections to their existing knowledge structures. New material should be
presented in the context of its intended real-world applications and its relationship to other
areas of knowledge, rather than being taught abstractly and out of context.
Material should not be presented in a manner that requires students to alter their cognitive
models abruptly and drastically. In Vygotsky’s terminology, the students should not be
forced outside their “zone of proximal development, the region between what they are
capable of doing independently and what they have the potential to do under adult guidance
or in collaboration with more capable peers [6]. They should also be directed to continually
revisit critical concepts, improving their cognitive models with each visit. As Bruner [5] puts
it, instruction should be spirally organized.
Instruction should require students to fill in gaps and extrapolate material presented by the
instructor. The goal should be to wean the students away from dependence on instructors as
primary sources of required information, helping them to become self-learners.
Instruction should involve students working together in small groups. This attributewhich
is considered desirable in all forms of constructivism and essential in social constructivism
supports the use of collaborative and cooperative learning.
The traditional lecture-based teaching approach is incompatible with all of these principles. If the
constructivist model of learning is acceptedand compelling research evidence supports it
then to be effective instruction must set up experiences that induce students to construct
knowledge for themselves, when necessary adjusting or rejecting their prior beliefs and
misconceptions in light of the evidence provided by the experiences. This description might
serve as a definition of inductive learning.
5
B. Cognition Research
Bransford et al. [2] offer a comprehensive survey of neurological and psychological research that
provides strong support for constructivism and inductive methods. Here are some of their
findings:
All new learning involves transfer of information based on previous learning [2, p. 53].
Traditional instruction in engineering and science frequently treats new courses and new
topics within courses as self-contained bodies of knowledge, presenting theories and formulas
with minimal grounding in students’ prior knowledge and little or no grounding in their
experience. Inductive instruction, on the other hand, presents new information in the context of
situations, issues, and problems to which students can relate, so there is a much greater chance
that the information can be linked to their existing cognitive structures.
Since learning is strongly influenced by prior knowledge, if new information is fully
consistent with prior knowledge it may be learned with relative ease, but if it involves a
contradiction several things may happen. If the contradiction is perceived and understood, it may
initially cause confusion but the resolution of the contradiction can lead to elimination of
misconceptions and greater understanding. However, if learners fail to understand the
contradiction or if they can construct coherent (to them) representations of the new material
based on existing misconceptions, deeper misunderstanding may follow [2, p. 70]. Traditional
teaching generally does little to force students to identify and challenge their misconceptions,
leading to the latter situation. The most effective implementations of inductive learning involve
diagnostic teaching, with lessons being designed to discover what students think in relation to
the problems on hand, discussing their misconceptions sensitively, and giving them situations to
go on thinking about which will enable them to readjust their ideas [2, p. 134].” The proper
choice of focus questions and problems in inquiry-based, problem-based, and discovery learning
methods can serve this function.
Motivation to learn affects the amount of time students are willing to devote to learning.
Learners are more motivated when they can see the usefulness of what they are learning and
when they can use it to do something that has an impact on others [2, p. 61].
This finding supports techniques that use authentic (real-world, professionally relevant)
situations and problems to provide contexts for learning the content and skills a course is
intended to teach. Inductive methods such as problem-based learning and case-based teaching do
this.
The likelihood that knowledge and skills acquired in one course will transfer to real work
settings is a function of the similarity of the two environments [2, p. 73].
School often emphasizes abstract reasoning while work focuses almost exclusively on
contextualized reasoning. Organizing learning around authentic problems, projects, and cases
helps to overcome these disparities and so improves the likelihood of subsequent transfer, in
addition to increasing motivation to learn as noted in the previous item. Moreover, traditional
schools differ from most work environments in that school heavily emphasizes individual work
while most work involves extensive collaboration. Assigning teams to perform most required
tasks (as most inductive methods do) thus further promotes transfer, provided that the students
6
are helped to develop teamwork skills and the work is organized in a way that assures individual
accountability for all of the learning that takes place [8–12].
Helping students develop metacognitionknowledge of how they learnimproves the
likelihood of their transferring information learned in one context to another one [2, p. 67].
Methods that train students in systematic problem-solving methods (generating and
evaluating alternative solutions, periodically assessing progress toward the solution, extracting
general principles from specific solutions, etc.) and call on them to make sense of new
information, to raise questions when they cannot, and to regularly assess their own knowledge
and skill levels promote the development of metacognitive skills. Most variants of problem-
based learning include such steps.
C. Intellectual Development and Approaches to Learning
Most college students undergo a developmental progression from a belief in the certainty of
knowledge and the omniscience of authorities to an acknowledgment of the uncertainty and
contextual nature of knowledge, acceptance of personal responsibility for determining truth,
inclination and ability to gather supporting evidence for judgments, and openness to change if
new evidence is forthcoming [13,14]. At the highest developmental level normally seen in
college students (termed contextual relativism by Perry [13]), individuals display thinking
patterns resembling those of expert scientists and engineers. A goal of science and engineering
instruction should be to advance students to that level by the time they graduate.
In their courses, students may be inclined to approach learning in one of three ways [15].
Some take a surface approach, relying on rote memorization and mechanical formula
substitution and making little or no effort to understand the material being taught. Others may
adopt a deep approach, probing and questioning and exploring the limits of applicability of new
material. Still others use a strategic approach, doing whatever is necessary to get the highest
grade they can, taking a surface approach if that suffices and a deep approach when necessary.
Another goal of instruction should be to induce students to adopt a deep approach to subjects that
are important for their professional or personal development.
Felder & Brent [16] observe that the characteristics of high levels of intellectual
development and of a deep approach to learning are essentially the same. Both contextual
relativism and a deep approach involve taking responsibility for one’s own learning, questioning
authorities rather than accepting their statements at face value, and attempting to understand new
knowledge in the context of prior knowledge and experience. It is reasonable to assume that
instructional conditions that induce students to adopt a deep approach should also promote
intellectual growth.
Several conditions of instruction have been shown to promote a deep approach, including
interest in and background knowledge of the subject, use of teaching methods that foster active
and long-term engagement with learning tasks, and assessment that emphasizes conceptual
understanding as opposed to recall or the application of routine procedural knowledge [17]. Well
implemented inductive teaching methods serve all of these functions. Authentic problems and
case studies can motivate students by helping to make the subject matter relevant, and they also
tend to keep the students interested and actively engaged in their learning tasks. Having to
7
analyze complex situations also promotes the students’ adoption of a deep approach to learning,
as rote memorization and simple algorithmic substitution are clearly inadequate strategies for
dealing with such situations. Moreover, open-ended problems that do not have unique well-
defined solutions pose serious challenges to students’ low-level beliefs in the certainty of
knowledge and the role of instructors as providers of knowledge. Such challenges serve as
precursors to intellectual growth [14].
D. Learning Cycle-Based Instruction
Several well-known instructional models involve learning cycles, wherein students work through
sequences of activities that involve complementary thinking and problem-solving approaches. In
most of these cycles, the different activities are designed to appeal to different learning style
preferences (concrete and abstract, active and reflective, etc.) [18]. When instructors teach
around the cycle in this manner, all students are taught partly in a manner they prefer, which
leads to an increased comfort level and willingness to learn, and partly in a less preferred
manner, which provides practice and feedback in ways of thinking they might be inclined to
avoid but which they will have to use to be fully effective professionals. Teaching around the
best known of such cyclesthat associated with Kolb’s experiential learning model [19]
involves (1) introducing a problem and providing motivation for solving it by relating it to
students’ interests and experience (the focal question is why?); (2) presenting pertinent facts,
experimental observations, principles and theories, problem-solving methods, etc., and
opportunities for the students to reflect on them (what?); (3) providing guided hands-on practice
in the methods and types of thinking the lessons are intended to teach (how?); and (4) allowing
and encouraging exploration of consequences and applications of the newly learned material
(what if?).
A learning cycle developed at the Vanderbilt University Learning Technology Center is
the STAR Legacy module [20], which consists of the following steps:
1. Students are presented with a challenge (problem, scenario, case, news event, or common
misconception presenting the targeted content in a realistic context) that establishes a need to
know the content and master the skills included in the learning objectives for the module.
2. The students then formulate their initial thoughts, reflecting on what they already know and
think about the context of the challenge and generating ideas about how they might address
the challenge.
3. Perspectives and resources are next provided. Perspectives are statements by experts that
offer insights into various dimensions of the challenge without providing a direct solution to
it, and resources may include lectures, reading materials, videos, simulations, homework
problems, links to websites, and other materials relevant to the challenge.
4. Assessment activities are then carried out, in which the students apply what they know and
identify what they still need to learn to address the challenge. The activities may include
engaging in self-assessments and discussions, completing homework assignments, writing
essays or reports, and taking on-line quizzes or exams. Multiple iterations between Steps 3
and 4 would normally be required to fully meet the challenge.
5. In the final wrap-up, an expert may present a model solution to the challenge, or the students
may present a report and/or complete an examination showing that they have met the
8
challenge and demonstrating their ma stery of the knowledge and skills specified in the
learning objectives.
The Star legacy module is a clear exemplar of an inductive approach to teaching and learning.
Depending on the nature and scope of the challenge, instruction based on such a module would
qualify as inquiry learning, project-based learning, or problem-based learning. Similarly,
learning cycles based on learning styles that begin with the presentation of a realistic problem or
challenge of some sort are inductive. Instruction based on learning cycles is consistent with
accepted principles of cognitive science [2] and its effectiveness has been repeatedly
demonstrated empirically [21].
In summary, inductive approaches to teaching and learning have much in their favor.
They are supported by the best research on learning currently available, compatible with the
currently most widely accepted theories of learning, and promotive of the problem-solving skills
and attitudes to learning that most instructors would say they desire for their students. Following
a brief section on assessment, we will examine the individual inductive methodswhat they are,
what they have in common and how they differ, and what is known about how well they succeed
in achieving desired educational outcomes.
III. ASSESSMENT AND EVALUATION OF INDUCTIVE METHODS
Rigorous comparisons of inductive methods with traditional expository methods are not easy to
design, for several reasons [22].
There are many varieties of inductive approaches, each of which can be implemented in
many wayswith greater or lesser instructor involvement, with or without formal facilitation
of teamwork, with most of the work being done in or out of class, and so on. Two articles
may claim to be studies of, say, problem-based learning, but they could involve dramatically
different forms of instruction and may well produce different learning outcomes.
Instructors may have varying degrees of experience and skill with whichever method they
adopt. Two different instructors using the same method in the same class could get different
results.
Student populations also vary considerably, among other ways in distributions of gender and
ethnicity, age, experience, motivation to learn, learning styles, and levels of intellectual
development [21]. The same instructor could use the same method in two different classes
and get different outcomes.
The conclusions drawn from a study may depend strongly on the learning outcome
investigatedacquisition of factual knowledge, development of a problem-solving or
interpersonal skill, retention in a curriculum, self-confidence level, attitude, or any
combination of these. An inductive method may be superior with respect to one outcome and
inferior with respect to another. (We will shortly see an example of this phenomenon in the
case of problem-based learning, which has frequently been found to lead to superior high-
level skills and attitudes but inferior short-term acquisition of factual knowledge.) Moreover,
reliable and valid assessments of high-level skills such as critical or creative thinking or
attributes such as lifelong learning skills are difficult to obtain, and two studies that use
different assessment methods could arrive at different conclusions.
9
Finally, as Prince [22] points out, implementations of inductive approaches such as problem-
based learning normally involve active and collaborative learning methods, both of which are
known to have positive effects on many learning outcomes. If an inductive method is found
to have a positive effect, sorting out how much of it can be attributed to the method itself and
how much to other methods imbedded in it can be a formidable challenge.
Considering these difficulties, it is not surprising that published studies report both
positive and negative outcomes for inductive learning relative to conventional instruction. Given
the difficulty (if not impossibility) of carrying out a clean and conclusive comparative study, the
best we can do is to look at results from a number of studies with different instructors,
implementations, learning outcomes, and student populations, to see if any robust generalizations
can be inferred. The sections that follow summarize results of such meta-analyses.
IV. INQUIRY LEARNING
A. Definition and Applications
Inquiry learning begins when students are presented with questions to be answered, problems to
be solved, or a set of observations to be explained [23]. If the method is implemented effectively,
the students should learn to formulate good questions, identify and collect appropriate evidence,
present results systematically, analyze and interpret results, formulate conclusions, and evaluate
the worth and importance of those conclusions [24]. The same statements could also be made
about problem-based learning, project-based learning, discovery learning, certain forms of case-
based instruction, and student research, however, so that inquiry learning may be considered an
umbrella category that encompasses several other inductive teaching methods. Lee makes this
point, observing that inquiry is also consistent with interactive lecture, discussion, simulation,
service learning, and independent study, and in fact probably the only strategy that is not
consistent with inquiry-guided learning is the exclusive use of traditional lecturing [24, p. 10].
In this paper we will use the term inquiry learning to refer to instruction that uses questions and
problems to provide contexts for learning and does not fall into another more restrictive
inductive learning category.
Besides overlapping with other inductive methods, inquiry learning encompasses a
variety of techniques that differ from one another in significant ways. Staver and Bay [25]
differentiate between structured inquiry (students are given a problem and an outline for how to
solve it), guided inquiry (students must also figure out the solution method) and open inquiry
(students must formulate the problem for themselves). Smith [26] makes a similar distinction
between teacher inquiry, in which the teacher poses questions, and learner inquiry, in which
questions are posed by the students. In process-oriented-guided-inquiry-learning (POGIL)
(<http://www.pogil.org>), students work in small groups in a class or laboratory on instructional
modules that present them with information or data, followed by leading questions designed to
guide them toward formulation of their own conclusions. The instructor serves as facilitator,
working with student groups if they need help and addressing class-wide problems when
necessary. Some proponents of inquiry suggest using a relatively structured form of inquiry in
the first year, gradually shifting toward more self-directed learning (including problem
formulation) as the curriculum progresses, while others advocate moving immediately to self-
direction [24].
10
Inquiry-based methods have been used extensively in the sciences [27–32] and to a lesser
extent in engineering [33, 34]. Guided inquiry has been particularly widely used in chemistry
curricula. The POGIL Web site (<http://www.pogil.org>) contains reports of implementations on
several campuses, instructional materials for different branches of chemistry, and a video
showing an implementation of the method in an introductory chemistry class
(<http://www.pogil.org/resources/GI_video.php>).
Lee et al.[24] report on a series of inquiry-based courses in different disciplines at North
Carolina State University that had four desired student outcomes in common: (a) improved
critical thinking skills, (b) greater capacity for independent inquiry, (c) taking more
responsibility for one’s own learning, (d) intellectual growth (e.g., on the Perry scale of
intellectual development). Following are several examples.
Introductory chemistry and physics courses are conducted in a hands-on inquiry-based
environment called SCALE-UP (Student-Centered Activities for Large Enrollment
University Programs) [35]. Students read and take quizzes about assigned material before
coming to class (a characteristic of Just-in-Time Teaching, another inductive technique to be
discussed), and work in teams on activities designed to help them discover or investigate
concepts for themselves.
In an introductory first-year microbiology course, the students read articles, generate
questions stimulated by the readings, identify underlying hypotheses and assumptions in the
articles, discuss their findings in small groups, and submit both their individual work and
group assignments. In honors sections of several third-year microbiology courses, the
students do extensive analysis and interpretation of experimental data and case studies, with
emphasis being placed on collecting and interpreting scientific data and testing hypotheses
[36].
In a first-year paper science and engineering course, the students complete an open-ended
design project, and in another first-year course they spend most of their time working in
teams on advanced problems at a level previously reserved for seniors, learning on their own
a great deal of the material that would traditionally have been delivered in lectures [37].
In an experimental College of Engineering program, instructors are given grants to develop
innovative classroom applications of laptop computers with wireless Internet access, which
are made available to all students in their courses. Courses in this program that made inquiry
a significant component of their instruction included the second and third semesters of
calculus, in which students used MAPLE® to explore solutions to real-world problems, and a
course on JAVA programming, in which students worked in pairs at the computer during
class to develop and implement programs and to clarify their conceptual understanding of
programming principles [38].
B. Evaluation
Several published meta-analyses conclude that inquiry-based instruction is generally more
effective than traditional instruction for achieving a variety of learning outcomes [26, 39].
Shymansky et al. [40] analyzed results from 81 experimental studies involving thousands of
students and found that inquiry learning produced significant positive gains for academic
achievement, student perceptions, process skills and analytic abilities. In a meta-analysis of 79
individual studies between 1965 and 1995 involving students from 7th grade through college,
11
Smith [26] found that inquiry learning improved academic achievement (effect size = 0.33),
critical thinking skills (effect size = 0.77) and laboratory skills (effect size = 0.14). There was
also a slight improvement in process skills (effect size = 0.05), which was not statistically
significant. In a meta-study of laboratory instruction conducted over roughly the same time
period, Rubin [41] found that inquiry-based instruction was superior to traditional instruction for
cognitive learning outcomes, which included conceptual and subject learning, reasoning ability,
and creativity (effect size = 0.18), as well as for non-cognitive outcomes, including manipulative
skills and attitudes (effect size = 0.39).
Colburn’s review of the literature [42] concludes that inquiry-based methods are likely to
be more effective than deductive methods in helping students gain understanding of concrete
observable phenomena, and less so in helping them understand how scientists explain or model
phenomena (e.g., via kinetic and molecular theories in chemistry and physics). He recommends
focusing activities around questions that students can answer directly via investigation, which
helps assure that the activities are oriented toward concrete concepts. He also advises
emphasizing activities that use materials and situations familiar to students for which they have
the necessary prerequisite skills and knowledge to succeed, but pose a sufficient level of
challenge to help them develop better thinking skills.
V. PROBLEM-BASED LEARNING
A. Definition and Applications
Problem-based learning (PBL) begins when students are confronted with an open-ended, ill-
structured, authentic (real-world) problem and work in teams to identify learning needs and
develop a viable solution, with instructors acting as facilitators rather than primary sources of
information [43–50]. Class time may be devoted to (i) groups reporting out their progress on
previous learning issues and listing their current learning issues and plans of work, (ii)
minilectures giving information on issues being dealt with by all groups, clarifying common
difficulties, and suggesting additional learning issues, and (iii) whole class discussion [50]. A
well-designed problem guides students to use course content and methods, illustrates
fundamental principles, concepts, and procedures, and perhaps induces the students to infer those
things for themselves instead of getting them directly from the instructor; and engages the
students in the types of reflection and activities that lead to higher-order learning. Problems may
vary significantly in scope, from single-topic single-discipline problems that can be solved in a
matter of days to multidisciplinary problems that may take an entire semester to solve. The
formulation of problems is discussed by Weiss [47], Tan [48, Ch. 6], and several authors in the
edited volume of Duch et al. [49].
PBL may be implemented in a variety of ways [50]. In the medical school model,
students work in groups of 710 under the supervision of a faculty member or another designated
tutor (e.g. a graduate student or advanced undergraduate). There is very little formal class time, if
any. In the floating facilitator model, students work on problems in groups of 35 during class.
The instructor moves from group to group during class, asking questions and probing for
understanding. Different levels of external guidance may be provided by a faculty member or a
designated tutor, or responsibility for the work may be taken by the groups themselves in what
Woods [51] calls self-directed, interdependent, small group problem-based learning. Acar &
Newman [52] describe a module in which students in their final year of a systems engineering
12
program served as tutors to first- and second-year students doing PBL-based project work. The
experience was instructive for both the tutors and the tutees, with the former noting its
helpfulness in interviews and as preparation for the workplace.
Modern problem-based learning originated in medical schools, principally those at Case
Western Reserve University in the 1950s and McMaster University in the 1960s. It is now
extensively practiced in medical education and other health-related disciplines including
veterinary medicine and nursing [53], and in other fields including architecture, psychology,
business and management, and engineering [48, 54]. It has been used in a number of curricula at
the University of Delaware and Samford University in the United States, McMaster University in
Canada, the University of Maastricht in the Netherlands, Linköping University in Sweden, and
the University of Newcastle in Australia; in chemical engineering at McMaster [51, 55],
Bucknell University [56, 57] and the Universitat Rovira I Virgili in Spain [58] and civil
engineering at Monash University in Australia [59–61]; and in an integrated physics,
mathematics, and computer science course at the Instituto Tecnológico y de Estudios Superiores
de Monterrey, Mexico [62]. PBL problems in chemistry & physics (and many other fields) and
guidance on how to use them are given in Duch et al. [49] and on Web sites maintained at the
University of Delaware (<http://www.udel.edu/pbl/>) and Samford University
(<http://www.samford.edu/pbl/>), both of which provide links to many other resources. A 2003
issue of the International Journal of Engineering Education (Vol. 19, No. 5) is devoted entirely
to PBL implementations at universities around the world.
Nelson [63] discusses using design projects as a basis for problem-based learning,
observing that the stages of designnaming (identifying main issues in the problem), framing
(establishing the limits of the problem), moving (taking an experimental action), and reflecting
(evaluating and criticizing the move and the frame) provides an ideal framework for the PBL
process. He cites examples in which he used PBL successfully to teach graduate courses in
instructional design, software development, and project management. The previously described
Star Legacy module developed at Vanderbilt University [20] provides another excellent
framework for PBL.
B. Evaluation
Dochy et al. [64] published a meta-analysis of the effectiveness of problem-based learning. The
authors identified 43 empirical studies of the effects of PBL on knowledge acquisition and
development of problem-solving skills in college students. Only studies that utilized natural
classroom instruction (as opposed to controlled laboratory studies) were included in the data
base. The average effect size was calculated both in an unweighted form and with each effect
size weighted by the inverse of the variance (which being proportional to N gives greater weight
to larger samples).
Seven of the studies analyzed found a positive effect of PBL on knowledge acquisition
and 15 found a negative effect, with a weighted average effect size and 95% confidence interval
of0.223 (±0.058). When only true randomized tests are included, however, the negative effect
of PBL on knowledge acquisition almost disappears, and when the assessment of knowledge is
carried out some time after the instruction was given the effect of PBL is positive. The
implication is that students may acquire more knowledge in the short term when instruction is
conventional but students taught with PBL retain the knowledge they acquire for a longer period
13
of time. For skill development, the results are unequivocal: 14 studies found a positive effect and
none found a negative effect, and the weighted average effect size was 0.460 (±0.058). The
positive effect of PBL on skill development holds regardless of whether the assessment is
concurrent with the instruction or delayed.
Prince [22] exa mined several meta-analyses of problem-based learning, separately
considering the effects of its constituent approaches: active learning (actively engaging students
in the learning process in class, as opposed to merely presenting them with information),
collaborative learning (students work on problems and projects collaboratively rather than doing
everything individually), and cooperative learning (team-based learning in which certain criteria
must be met, most notably individual accountability for all of the learning that is supposed to
take place). He concluded that the strongest positive effects of PBL related to the student and
faculty responses to the method and to a small but robust improvement in students’ skill
development. While a statistically significant effect was not found for improvement of academic
achievement as measured by exams, there was evidence that PBL enhanced students’ retention
and ability to apply material.
Individual studies have found a robust positive effect of PBL on skill development [1, 65,
66], understanding the interconnections among concepts [65], deep conceptual understanding
[67], ability to apply appropriate metacognitive and reasoning strategies [68], teamwork skills
[69], and even class attendance [70], but have not reached any firm conclusion about the effect
on content knowledge. A longitudinal study of the effectiveness of the McMaster PBL program
in chemical engineering demonstrated its superiority to traditional education in the development
of key process skills [55]. PBL has also been shown to promote self-directed learning [71] and
the adoption of a deep (meaning-oriented) approach to learning, as opposed to a superficial
(memorization-based) approach [21, 46, 72].
Several papers discuss the possible tradeoff between knowledge acquisition and skill
development, or alternatively, between breadth and depth of content coverage when PBL is used.
de Graaf & Kolmos [73] observe that students may be expected to reach a level of analytical
comprehension through problem-based work that cannot be attained in conventionally-taught
classes, but they might experience subject area gaps in doing so and so should be equipped to fill
in such gaps when a need arises to do so. Perrenet et al. [74] make a similar point specifically
related to engineering education. They observe that if PBL is implemented in a way that permits
considerable self direction by the students, the learning that takes place may not necessarily
attack and correct the misconceptions that hinder understanding of critical engineering concepts,
which could in turn interfere with the students’ ability to apply their learning to novel problems
in a professional setting. They also note that unlike medicine, which has an encyclopedic
structure, the knowledge structures of engineering and the sciences tend to be hierarchical.
Engineering students engaged in self-guided PBL might easily overlook or bypass critical topics,
which could interfere with future learning of important content, especially if the implementation
of PBL is curriculum-wide rather than being limited to a few specific courses. Instructors should
be aware of these potential pitfalls and design courses and problem sets so that all essential
concepts are addressed.
Problem-based learning is not an easy instructional method to implement. It requires
considerable subject expertise and flexibility on the part of instructors, who may be forced out of
their areas of expertise when student teams set off in unpredictable and unfamiliar directions.
14
PBL also makes students assume unaccustomed levels of responsibility for their own learning,
and all of the project management problems and interpersonal conflicts that commonly occur
when students are required to work in teams crop up in PBL. Many students are consequently
hostile to PBL when they first encounter it, which can be intimidating to instructors who are
unprepared for this reaction. Instructorsparticularly relatively new onesare therefore not
advised to jump into full-scale problem-based learning until they familiarize themselves with
proven facilitation techniques, and they are also advised to use scaffolding, providing a fairly
high level of guidance to students who are new to PBL and gradually withdrawing it as the
students gain more experience with the approach [75]. Tan [48, Ch. 4] provides an excellent
guide to instructors on preparing students for PBL and helping them adjust to this instructional
method, and good guidance is also provided by Duch et al. [49] and Woods [51].
The possibility of student resistance should not deter knowledgeable instructors from
adopting the method. A number of studies offer evidence that most students who experience PBL
eventually come to favor it over traditional methods [66, 67, 70, 76, 77].
VI. PROJECT-BASED LEARNING AND HYBRID
(PROBLEM/PROJECT-BASED) APPROACHES
A. Definition and Applications
Project-based learning begins with an assignment to carry out one or more tasks that lead to the
production of a final producta design, a model, a device or a computer simulation. The
culmination of the project is normally a written and/or oral report summarizing the procedure
used to produce the product and presenting the outcome. (Note: The acronym PBL is frequently
used to denote project-based learning as well as problem-based learning. We will not do so in
this paper to avoid adding to the confusion this labeling may cause.)
A tradeoff exists between instructors being fairly directive in choosing projects, which
helps maintain a focus on course and curriculum objectives, and allowing students the autonomy
to choose their own project formulations and strategies, which increases their motivation. de
Graaf & Kolmos [73] define three types of projects that differ in the degree of student autonomy:
Task project: Student teams work on projects that have been defined by the instructor, using
largely instructor-prescribed methods. This type of project provides minimal student
motivation and skill development, and is part of traditional instruction in most engineering
curricula.
Discipline project: The instructor defines the subject area of the projects and specifies in
general terms the approaches to be used (which normally involve methods common in the
discipline of the subject area), but the students identify the specific project and design the
particular approach they will take to complete it.
Problem project: The students have nearly complete autonomy to choose their project and
their approach to it.
de Graaf and Kolmos [73] note that a common difficulty faced by students in a project-
based environment is transferring methods and skills acquired in one project to another project in
a different subject or discipline. Instructors should include such transference in their course
15
objectives and should guide students to see connections between their current project and what
they have learned previously, gradually withdrawing this support as the students become more
adept at seeing the connections themselves. The instructors should also prepare students to fill in
gaps in content knowledge when a need arises, taking into account the fact that such gaps may be
more likely to arise in project-based learning than in conventional lecture-based instruction.
Project-based learning at the individual course level is familiar in engineering education,
having been used almost universally in capstone design and laboratory courses and with growing
frequency in first-year engineering courses and courses that engage students in consulting
projects [78–80]. A few schools have made project-based learning the focus of many or most of
their engineering courses, including the Universities of Aalborg and Roskilde in Denmark;
Bremen, TU Berlin, Dortmund, and Oldenburg in Germany, Delft and Wageningen in the
Netherlands [81], Monash University and Central Queensland University in Australia [82], and
Olin College in the United States [83].
Project-based learning is similar to problem-based learning in several respects. Both
normally involve teams of students in open-ended assignments that resemble challenges the
students are likely to encounter as professionals, and both call for the students to formulate
solution strategies and to continually re-evaluate their approach in response to outcomes of their
efforts. There are differences in the two approaches as they have traditionally been implemented,
however. A project typically has a broader scope and may encompass several problems. In
addition, in project-based learning the end product is the central focus of the assignment and the
completion of the project requires primarily application of previously acquired knowledge, while
solving a problem requires the acquisition of new knowledge and the solution may be less
important than the knowledge gained in obtaining it. In other words, the emphasis in project-
based learning is on applying or integrating knowledge while that in problem-based learning is
on acquiring it.
In practice, however, the distinction between the two methods is not necessarily that
clean, and programs have recently adopted approaches that include features of both of them. The
University of Aalborg has the oldest and best known project-based engineering curriculum in the
world, which began with the formation of the university in 1974. Project work accounts for
roughly 50% of the curriculum, with task and problem projects dominating the first year of
instruction, task and discipline projects dominating the second and third years, and problem
projects dominating the fourth and fifth years [73]. The current approach at Aalborg is a hybrid
of problem-based and project-based learning, with the projects being more about acquiring
knowledge than applying it [84]. The main goal in the first year is to give students a general
competence in project work and an awareness of general problem solving methods, while in the
rest of the curriculum the focus shifts to more specific technical and scientific learning
objectives, with the project work being mainly a mechanism for achieving those goals.
Aalborg has recently adapted its project-based approach to distance education offerings,
with virtual groups meeting once or twice a week using Internet chat facilities [85]. Many of the
positive features of project work have been observed in this format as well, although the authors
note that the experience seems to accentuate the differences between strong and weak students,
with the latter being more likely to become demotivated and to make less progress in the distance
environment than they do in a conventional classroom environment.
16
Another institutional implementation of problem/project-based learning was initiated in
2000 by the engineering school of the University of Louvain in Belgium, with both week-long
problems and semester-long projects being routinely assigned to student teams in the first two
years of the engineering curriculum [86]. The evaluation of this program summarized in the next
section provides some of the best available evidence for the effectiveness of the hybrid approach.
B. Evaluation
Thomas [87] carried out an extensive review of research on project-based learning done
primarily at the precollege level, considering only projects that (a) were central to the course, (b)
focused on central concepts and principles of the discipline, (c) required acquisition of some new
knowledge rather than being straightforward applications of existing knowledge, (d) were
student-driven to some degree (as opposed to being cookbook exercises), and (e) were
authentic, containing as many elements as possible of the type of environment the students are
likely to encounter as professionals. The findings resemble those found for problem-based
learning: comparable or somewhat better performance in project-based environments on tests of
content knowledge, and significantly better performance on assessments of conceptual
understanding and ability to solve problems that require it, metacognitive skills, and attitudes to
learning. Thomas also cites studies suggesting that project-based learning may effectively reach
students whose learning styles are poorly suited to a traditional lecture-based classroom
environment.
More recently, Mills and Treagust [82] reviewed published evaluations of project-based
learning programs in engineering and concluded that the findings are similar to those for
problem-based learning in medicine. Relative to traditionally-taught students, students who
participate in project-based learning are more motivated, demonstrate better communication and
teamwork skills, and have a better understanding of issues of professional practice and how to
apply their learning to realistic problems; however, they may have a less complete mastery of
engineering fundamentals, and some of them may be unhappy over the time and effort required
by projects and the interpersonal conflicts they experience in team work, particularly with
teammates who fail to pull their weight. In addition, if the project work is done entirely in
groups, the students may be less well equipped to work independently.
The hybrid (problem/project-based) curriculum at the University of Louvain was assessed
by a multidisciplinary team of engineers and educators, who compared three cohorts of students
who passed through the new curriculum with two cohorts from the final years of the old
(traditional) curriculum [86]. The assessment measures included pretests and posttests of
students’ basic knowledge, understanding of concepts, and ability to apply them; students’ self-
efficacy, intrinsic vs. extrinsic goal orientation, satisfaction with the curriculum, learning and
self-regulating strategies, and attitudes toward group work; and instructors’ teaching practices,
satisfaction with teaching, and perceptions of the impact of the PBL curriculum on the
instructional environment. The student tests and questionnaire responses were blind-rated after
the fourth year of the study, so that the raters did not know whether the subjects had gone
through the old or the new curriculum.
The results of the Louvain study are dramatic. Of 79 between-group comparisons of
knowledge, conceptual understanding, and application, 23 favored the new curriculum, one
favored the old one, and the remainder showed no significant differences. Relative to students in
17
the old curriculum, students in the new one felt that they received more support from their
instructors, saw more connections between theory and practice, were more inclined to use
autonomous learning strategies (search for information, seek help when needed, verify
completed work), and were less reliant on rote memorization. The superior outcomes for the
PBL-taught students could be attributed in part to their perception of greater support from their
instructors, a factor known to have a positive impact on both performance and attitudes. They
also felt that they had to work more and harder than students taught traditionally, and they had
problems with being tested individually after doing most of their work in groups (a common
complaint of students working in a heavily collaborative learning environment). Teachers in the
study saw a positive impact of the PBL curriculum on student competencies in teamwork,
modeling, transfer of knowledge, and analysis; the quality of student-teacher interactions and
teacher-teacher interactions; their satisfaction with and pleasure in teaching; and their
engagement in teaching and willingness to change their teaching practices. The last two
outcomes were particularly strong among teachers who perceived their administration to be
supportive of teaching (encouraging discussion of teaching, valuing teaching improvement, and
offering training and collegial support). This result has important implications for the critical role
of administrators in attempts to reform education.
VII. CASE-BASED TEACHING
A. Definition and Applications
In case-based teaching, students analyze case studies of historical or hypothetical situations that
involve solving problems and/or making decisions. Kardos & Smith [88] defined a case in the
context of engineering education as an account of an engineering activity, event or problem
containing some of the background and complexities actually encountered by an engineer. The
same definition (with the appropriate substitution being made for engineering) applies to law,
medicine, management, teacher education, or any of the other fields that have made extensive
use of cases for professional training.
Cases in all fields typically involve one or more challenges of various types, such as
diagnosing technical problems and formulating solution strategies, making business management
decisions taking into account technical, economic, and possibly social and psychological
considerations, and confronting ethical dilemmas. The cases should be authenticrepresentative
of situations likely to be encountered in professional practiceand may be drawn from stories in
newspapers or magazines or built from interviews with individuals involved in the situations in
question. A case might include descriptions of what happened and what led up to it, the
problems and challenges, the resources and constraints under which solutions could be sought,
the decisions that were made, the actions that were taken, and the outcomes. The idea is that in
analyzing complex authentic cases, the students become aware of the kinds of situations and
dilemmas they might have to face as professionals, gain both theoretical and practical
understanding of their subjects, develop critical reasoning skills, explore their existing
preconceptions, beliefs, and patterns of thinking, and make necessary modifications in those
preconceptions, beliefs, and patterns to accommodate the realities of the cases [89]. These
attributes of case-based teachingparticularly those related to making students aware of their
preconceptions and beliefsclearly fit comfortably in the framework of constructivism.
18
Whether or not case-based instruction qualifies as inductive (and, one might suspect,
whether and how well it succeeds) depends on how it is implemented. In one variant (which
Lynn [90] terms a research case), the case is a complete narrative of a problematic situation,
how people dealt with it, and what the outcomes were. Students may be called on to study the
case ahead of time and be prepared to discuss it in class, but the same may be said of any
traditional lecture-based approach that incorporates Socratic questioning. Lynn observes that
research cases can be useful for illustrating appropriate, typical, or exemplary decision making
but not for teaching critical thinking and decision-making skills, since in those cases the thinking
has already been done, the decisions made, and the outcomes determined and given to the
students. Instruction based on the use of such cases cannot be considered inductive.
Forms of case-based instruction that are inductive use what Lynn calls teaching cases,
in which the circumstances of the case are described but the decisions made by the protagonists
are withheld so that the students can do their own analysis and decision-making. Analyses of
teaching cases involve several steps [91]: (1) Review of the case content, (2) statement of the
problem, (3) collection of relevant information, (4) development of alternatives, (5) evaluation of
alternatives, (6) selection of a course of action, and (7) evaluation of solutions, and possibly
review of actual case outcomes. The similarities of this method to problem-based learning are
evident; however, unlike the problems generally used in PBL, cases tend to be relatively well-
structured, rich contextual details are provided, and students are called on to apply material that
is already somewhat familiar, whereas PBL tends to use poorly structured problems to drive the
acquisition of new content knowledge [92].
The use of cases for teaching probably goes back to the Harvard Law School in about
1870. The method was subsequently adopted by the Harvard Business School after World War I,
and is now used routinely in schools of law, medicine, public administration and business
management [90]. Cases are also used with increasing frequency in science education [93] and
engineering education [94, 95]. Libraries of cases in science and engineering and resources for
teachers wishing to use them have been compiled by the National Center for Case Study
Teaching in Science [<http://ublib.buffalo.edu/libraries/projects/cases/ubcase.htm>], the Penn
State Center for Teaching and Learning with Technology
[<http://tlt.its.psu.edu/suggestions/cases/>], and the Center for Case Studies in Engineering
[<http://www.civeng.carleton.ca/ECL/>]. Most of the cases in the latter database are decades old
and might therefore involve obsolete technology, but they should still be useful vehicles for
promoting the types of critical thinking and problem-solving skills that are as vital today as they
were when the cases were developed. Engineering case studies are also regularly published in the
Journal of STEM Education (<http://www.jstem.org>).
B. Evaluation
Case-based teaching has strong proponents among practitioners; however, there is relatively little
solid empirical support for it, a fact noted by several authors [89, 96, 97]. Lundeberg et al. [89]
report that the use of case studies enhanced students’ ability to recognize multiple perspectives (a
finding that is further supported by Adams [98]), and they also note that the use of cases
developed students’ ability to identify relevant issues. Levin [99] found that cases improved
students’ reasoning and problem-solving skills, and Gabel [100] claims that they increased the
use of higher-order thinking on Bloom’s taxonomy. Fasko [97] found that most studies he
examined showed little or no difference in knowledge acquisition between case studies,
19
discussion, and lecture-based methods, but both cases and discussions were better than lectures
for retention and application of material as well as problem-solving skills. Katsikitis et al. [101]
compared case studies to PBL and found no significant difference between the two methods
related to performance or knowledge acquisition.
VIII. DISCOVERY LEARNING
A. Definition
Discovery learning is an inquiry-based approach in which students are given a question to
answer, a problem to solve, or a set of observations to explain, and then work in a largely self-
directed manner to complete their assigned tasks and draw appropriate inferences from the
outcomes, discovering the desired factual and conceptual knowledge in the process [5]. In the
purest form of this method, teachers set the problems and provide feedback on the students’
efforts but do not direct or guide those efforts. This method is rarely used in higher education,
among other reasons because instructors who hear about it fearprobably with good causethat
they would only be able to cover a small fraction of their prescribed content if students were
required to discover everything for themselves. The only way to counter this fear would be to
present solid evidence that discovery learning produces improved learning outcomes without
requiring a major sacrifice of content, and as we will see in the next section, such evidence does
not exist. What instructors are more likely to do is apply a variant of discovery learning
(sometimes called guided discovery) that involves the instructor providing some guidance
throughout the learning process [102]. Once this is done, the distinctions between discovery and
guided inquiry or problem-based learning tend to disappear.
B. Evaluation
Leonard [103] studied the use of guided inquiry and discovery learning in science laboratory
courses, and found no statistically significant differences in student scores on tests and lab
reports. Some studies suggest that discovery learning can enhance students’ retention of material
and others reach the opposite conclusion [104–108]. The studies that show a positive effect also
suggest that retention is improved only when the learning task is based on previously understood
principles. Singer and Pease [109] compared the effectiveness of guided inquiry and discovery
learning on the acquisition, transfer and retention of motor skills. They concluded that for
learning new tasks, guided inquiry was more efficient, and for transferring learned skills to tasks
of similar or greater difficulty there was no difference.
IX. JUST-IN-TIME TEACHING
A. Definition and Applications
Just-in-time teaching (JiTT) combines Web-based technology with active learning methods in
the classroom [110–113]. Students individually complete Web-based assignments a few hours
before class in which they answer questions, and the instructor reads through their answers
before class and adjusts the lessons accordingly (just in time). This process is repeated several
times a week. The use of questions to drive learning makes the method inductive. The technique
was developed jointly by physics faculty at IUPUI, the U.S. Air Force Academy, and Davidson
College. It can be combined with almost any in-class active learning approach.
20
The preliminary Web-based exercises (termed Warmups at IUPUI and Davidson and
Preflights at the Air Force Academy) normally require the student to preview the textbook
material. The exercises are conceptual in nature and are designed to help students confront
misconceptions they may have about the course material. They serve the functions of
encouraging students to prepare for class regularly, helping teachers to identify students’
difficulties in time to adjust their lesson plans, and setting the stage for active engagement in the
classroom. They are individualized to minimize plagiarism and graded using an automated on-
line system, although the authors stress the importance of instructors reading a representative
selection of responses to monitor the students’ qualitative understanding of the material. The
students may submit solutions any number of times with no penalty until they get them correct.
JiTT resources also include enrichment materials of several types [110]:
course-related news stories that demonstrate the real-world relevance of the course material,
historical anecdotes, and descriptions of familiar phenomena or devices that illustrate course
concepts;
on-line homework, extra-credit assignments that often deal with the enrichment materials,
and puzzles, additional conceptual questions that force the students to think about the
material at a deeper level than the straightforward preparatory assignments;
various computer-based mechanisms for communication between students and the instructor
and among students, including an electronic suggestion box that instructors monitor
regularly, a course bulletin board that students may use to communicate among themselves
(e.g. to set up study sessions or team meetings, or to raise and answer questions), archives of
previous materials, and a credit check in which they can monitor their assignment grades
and see how they are doing with respect to the class as a whole.
Novak et al. [112], the physicists who developed JiTT, cast many of their Web-based materials
in the form of Java applets that they call physlets. The students are presented with a problem that
presents a set of observations or experimental data in a visual manner, and they have to analyze it
qualitatively before they are allowed to do any mathematical analysis, figuring out what they
know and what they need to find out and then planning a solution strategy. The connection to
inquiry learning and problem-based learning is clear.
JITT classes are a combination of interactive lectures, in which the instructor does a fair
amount of mini-lecturing between activities; collaborative recitations, which are not necessarily
preceded by preparatory Web-based exercises, and laboratories. In the lectures, the instructor
might begin by summarizing student responses to the preparatory exercises and then discussing
common errors. The end of the lecture might involve a similar discussion of a puzzle. The
collaborative recitations are likely to begin with a review of the homework, and then teams of
students work on new problems. Faculty members circulate, help teams that need help, and if a
common problem emerges, provide some instruction on how to address it. Lectures and
recitations may be held separately or they may be integrated with each other and with
laboratories. Paper homework is assigned in addition to the preparatory web-based exercises.
21
B. Evaluation
Novak et al. [112] assess JiTT for its impact on cognitive outcomes, student attrition and student
attitudes in physics. Student learning was assessed using the Force Concept Inventory, which
showed normalized student gains between 35% and 40%. This gain is similar to that found for
other interactive-engagement teaching methods [114] and is significantly better than the average
normalized gains found in traditionally-taught physics courses. The authors also report that JiTT
reduced student attrition by 40% compared to previous offerings taught traditionally and that
student responses to JiTT have been overwhelmingly positive.
X. GETTING STARTED WITH INDUCTIVE TEACHING AND LEARNING
Once instructors are persuaded that inductive teaching methods are worth attempting, they face
the question of which method to use. The answer, like the answer to all real questions, begins
with “it depends”: specifically, it depends on the instructor’s learning objectives, the instructor’s
and the students’ prior experience with learner-centered teaching methods, the instructor’s
confidence in his or her content knowledge and teaching skill, and the availability of local
expertise and support for each of the various methods.
Before teaching a topic or series of lessons using any inductive method, the instructor
should write learning objectives that define what the student should be able to do (explain,
calculate, derive, design, model, critique,...) when the instruction has been concluded. The
objectives should guide the choice of focus problems, learning activities, and assessment
methods. Mager [115] and Gronlund [116] provide guidance on how to write effective learning
objectives, and Felder and Brent [117] discuss writing objectives to address Outcomes 3a3k of
the ABET Engineering Criteria.
Once learning objectives have been defined, a suitable inductive instructional method
may be identified. We propose the following guidelines for making the choice:
Inquiry learning. Inquiry is the simplest of the inductive approaches and might be the best
one for inexperienced or previously traditional instructors to begin with. It requires designing
instruction so that as much learning as possible takes place in the context of answering
questions and solving problems. As the students gain more experience with this approach, the
instructor may increase the scope and difficulty of the focus questions, use more open-ended
and ill-structured problems and simultaneously decrease the amount of explicit guidance
provided.
Problem-based learning. Problem-based learning is the most complex and difficult to
implement of the methods reviewed in this paper. It calls for a complex, open-ended,
authentic problem whose solution requires knowledge and skills specified in the learning
objectives. Such problems take time to create. PBL also requires considerable teaching skill
for instructors to deal with unfamiliar technical questions and problems, student resistance
and possibly hostility toward PBL, and the array of interpersonal problems that frequently
arise when students work in teams. Full-fledged PBL is therefore best undertaken by
experienced instructors with solid expertise in the subject matter of the course and two or
more semesters of experience with cooperative learning in a more conventional instructional
environment. Smith et al. [118] offer suggestions for implementing cooperative learning, and
Felder and Brent [8, 119] and Oakley et al. [10] suggest strategies for overcoming student
22
resistance to learner-centered instructional methods and helping student groups become
effective teams. Despite the challenges, PBL is a natural environment in which to develop
students’ professional skills such as problem-solving, team work and self-directed or lifelong
learning, and it provides an excellent format to integrate material from across the curriculum.
Instructors wishing to focus specifically on these learning outcomes should consider adopting
PBL.
Project-based learning and hybrid problem/project-based approaches. Project-based
learning is well suited to the capstone design course in engineering and to laboratory courses
that are more than collections of cookbook experiments, and it may also be used in other
courses that deal with process or product design and development. Like the focus problems
in problem-based learning, projects should be authentic and should address the instructor’s
learning objectives; moreover, if students work in teams, the instructor should observe the
principles of cooperative learning including holding all team members individually
accountable for the entire project content and facilitating their acquisition of teamwork skills
[8, 10, 118, 119]. As instructors and students gain experie nce with project-based learning, the
projects may be made more open-ended with less guidance being provided on how to
complete them. In other words, they may be increasingly structured as problem-based
learning exercises.
Case-based teaching. Cases are effectively used when learning objectives include decision-
making in complex authentic situations. With appropriate selection, case-based teaching can
also provide an excellent environment in which to address specific ABET mandated
outcomes such acquiring an understanding professional and ethical responsibility, knowledge
of contemporary issues or the ability to understand engineering solutions in a global and
societal context. Scenarios suitable for cases might involve diagnosing technical problems
and formulating solution strategies, making business management decisions taking into
account technical, economic, and possibly social and psychological considerations, and
confronting ethical dilemmas. Formulating good cases can be a difficult and time-consuming
task; before trying to do it, instructors should first check the libraries of cases in science and
engineering cited in Section VII to see if an existing case addresses their learning objectives.
Just-in-time teaching. JiTT is a natural method to use when (1) it is important to the
instructor that the students keep up with readings and assignments on a day-by-day basis, and
(2) course management software is available and convenient to use for administering on-line
assignments and assessing the students’ responses. Instructors who plan to use the method
should have solid expertise in the course content and the flexibility needed to modify their
lectures on short notice after examining students’ responses to the preliminary exercises.
Also, a significant expenditure of time and effort is sure to be required if the preliminary
Web-based exercises and Java applets must all be developed from scratch. Before
undertaking this task, instructors should see if materials can be obtained from colleagues at
their institution or elsewhere who have used JiTT for the same course.
We do not recommend using the pure form of discovery learningin which students work with
little or no guidance from instructorsin undergraduate engineering curricula.
Once the decision about adoption of a method is made, the instructor should refer to
texts, articles, and Web-based resources on the chosen method and take full advantage of
experienced colleagues and teaching center consultants who can offer tips on implementing it
and dealing with problems that arise with its use.
23
XI. SUMMARY
The traditional approach to teaching science and engineering is deductive, beginning with the
presentation of basic principles in lectures and proceeding to the repetition and application of the
lecture content by the students. The teaching methods discussed in this paperinquiry learning,
problem-based learning, project-based learning, case-based teaching, discovery learning, and
just-in-time teachinginstead proceed inductively, beginning with observations to be
interpreted, questions to be answered, problems to be solved, or case studies to be analyzed. The
content knowledge, methods, and skills that the course is designed to teach are acquired by the
students, with varying degrees of instructor guidance, in the context of those exercises. If and
when instructors present information, they do so only once the need for that information to
complete the exercises has been established.
While the quality of research data supporting the different inductive methods is variable,
the collective evidence favoring the inductive approach over traditional deductive pedagogy is
conclusive. Induction is supported by widely accepted educational theories such as cognitive and
social constructivism, by brain research, and by empirical studies of teaching and learning.
Inductive methods promote students’ adoption of a deep (meaning-oriented) approach to
learning, as opposed to a surface (memorization-intensive) approach. They also promote
intellectual development, challenging the dualistic type of thinking that characterizes many
entering college students (which holds that all knowledge is certain, professors have it, and the
task of students is to absorb and repeat it) and helping the students acquire the critical thinking
and self-directed learning skills that characterize expert scientists and engineers.
This is not to say, however, that simply adopting an inductive method will automatically
lead to better learning and more satisfied students. As with any form of instruction, inductive
teaching can be done well or poorly, and the outcomes that result from it are only as good as the
skill and care with which it is implemented. Many students are resistant to any type of instruction
that makes them more responsible for their own learning, and if the appropriate amount of
guidance and support is not provided when inductive methods are used, the resistance can
escalate to hostility, inferior learning outcomes, poor evaluations, and a resolution by the
instructor never to try anything like that again.
Instructors who set out to implement an inductive method should therefore first
familiarize themselves with best practices such as providing adequate scaffoldingextensive
support and guidance when students are first introduced to the method, followed by gradual
withdrawal of the support as the students gain more experience and confidence in its use.
Instructors should also anticipate some student resistance to inductive learning and should be
aware of effective strategies for defusing it, many of which are outlined by Felder and Brent [8,
16, 119]. If these precautions are taken, both the students and the instructor should soon start
seeing the positive outcomes promised by the research.
ACKNOWLEDGMENTS
The authors are grateful to Rebecca Brent, Valri Hammonds, Anette Kolmos, and Virginia Lee
for reading a preliminary draft of the paper and offering valuable comments and suggestions for
its improvement.
24
REFERENCES
1. Albanese, M.A., and Mitchell, S. Problem-Based Learning: A Review of Literature on its Outcomes
and Implementation Issues,” Academic Medicine, Vol. 68, 1993, pp. 5281.
2. Bransford, J.D., Brown, A.L., and Cocking, R.R., eds., How People Learn: Brain, Mind, Experience,
and School, Washington, D.C.: National Academy Press, 2000. Online at <http://www.nap.edu/
books/0309070368/html/ >.
3. Piaget, J., The Psychology of the Child, New York: Basic Books, 1972.
4. Dewey, J., How We Think, Mineola , New York: Dover, 1997 (reproduction of the 1910 work
published by D.C. Heath).
5. Bruner, J.S., “The Act of Discovery,” Harvard Educational Review, Vol. 31, No. 1, 1961.
6. Vygotsky, L.S., Mind in Society , Cambridge, MA: Harvard University Press, 1978.
7. Biggs, J., “Enhancing Teaching through Constructive Alignment,” Higher Education, Vol. 32, 1996,
pp. 118.
8. Felder, R.M. and Brent, R. Effective Strategies for Cooperative Learning, J. Cooperation and
Collaboration in College Teaching, Vol. 10, No. 2, 6975 (2001), <http://www.ncsu.edu/felder-
public/Papers/ CLStrategies(JCCCT).pdf>.
9. Johnson, D.W., Johnson, R.T., and Stanne, M.E., Cooperative Learning Methods: A Meta-Analysis,
University of Minnesota, Minneapolis: Cooperative Learning Center, 2000, <http://www.co-
operation.org/pages/ cl-methods.html>.
10. Oakley, B., Felder, R.M., Brent, R., and Elhajj, I., “Turning Student Groups into Effective Teams,” J.
Student Centered Learning, Vol. 2, No. 1, 2004, pp. 934, <http://www.ncsu.edu/felder-
public/Papers/Oakley-paper(JSCL).pdf>.
11. Springer, L., Stanne, M.E., and Donovan, S., Effects of Small-Group Learning on Undergraduates in
Science, Mathematics, Engineering, and Technology: A Meta-Analysis, Madison, WI: National
Institute for Science Education, 1997, <http://www.wcer.wisc.edu/nise/CL1/CL/resource/R2.htm>.
12. Terenzini, P.T., Cabrera, A.F., Colbeck, C.L., Parente, J.M., and Bjorklund, S.A., “Collaborative
Learning vs. Lecture/Discussion: Students Reported Learning Gains,” J. Engr. Education, Vol. 90,
No. 1, 2001, pp. 123130.
13. Perry, W.G., Forms of Intellectual and Ethical Development in the College Years: A Scheme, San
Francisco, Cal.: Jossey-Bass, 1988. (An updated reprint of the original 1970 volume.)
14. Felder, R.M., and Brent, R., “The Intellectual Development of Science and Engineering Students. 1.
Models and Challenges,” J. Engr. Education, Vol. 93, No. 4, 2004, pp. 69277,
<http://www.ncsu.edu/felder-public/Papers/IntDev-I.pdf>.
15. Marton, F. and Säljö, R., “Approaches to Learning,” in F. Marton, D. Hounsell, and N. Entwistle,
eds., The Experience of Learning, 2nd ed., Edinburgh: Scottish Academic Press, 1997.
16. Felder, R.M., and Brent, R., “The Intellectual Development of Science and Engineering Students. 2.
Teaching to Promote Growth,” J. Engr. Education, Vol. 93, No. 4, 2004, pp. 279291,
<http://www.ncsu.edu/felder-public/Papers/IntDev-II.pdf>.
17. Ramsden, P., Learning to Teach in Higher Education, 2nd ed., London: Taylor and Francis, Inc.,
2003.
18. Felder, R.M., “Matters of Style,” ASEE Prism, Vol. 6, No. 4, 1996, pp. 1823,
<http://www.ncsu.edu/felder-public/Papers/LS-Prism.htm>.
19. Kolb, D.A., Experiential Learning: Experience as the Source of Learning and Development,
Englewood Cliffs, NJ: Prentice-Hall, 1984.
20. “Star Legacy Modules,” Iris Center for Faculty Enhancement, Vanderbilt University,
<http://iris.peabody.vanderbilt.edu/slm.html>.
25
21. Felder, R.M., and Brent, R., “Understanding Student Differences,” J. Engr. Education, Vol. 94, No.
1, 2005, pp. 5772, < http://www.ncsu.edu/felder-public/Papers/Understanding_Differences.pdf>.
22. Prince, M., “Does Active Learning Work? A Review of the Research,” J. Engr. Education, Vol. 93,
No. 3, 2004, pp. 223231.
23. Bateman, W., Open to Question: The Art of Teaching and Learning by Inquiry, San Francisco:
Jossey-Bass, 1990.
24. Lee, V.S., ed., Teaching and Learning through Inquiry, Sterling, VA: Stylus Publishing, 2004.
25. Staver, J.R., and Bay, M., “Analysis of the Project Synthesis Goal Cluster Orientation and Inquiry
Emphasis of Elementary Science Textbooks,” J. Research in Science Teaching, Vol. 24, 1987, pp.
629643.
26. Smith, D., A Meta-Analysis of Student Outcomes Attributable to the Teaching of Science as Inquiry as
Compared to Traditional Methodology, Ph.D. dissertation, Temple University, Department of
Education, 1996.
27. McDermott, L.C., Physics by Inquiry, Physics Education Group, Physics Dept., University of
Washington, Seattle, WA, 1995.
28. Thacker, B., Eunsook, K., Trefz, K., and Lea, S., “Comparing Problem Solving Performance of
Physics Students in Inquiry-Based and Traditional Introductory Physics Courses,Am. J. of Physics,
Vol. 62, No. 7, 1994, p. 627.
29. Tretter, T., and Jones, M., “Relationships Between Inquiry-Based Teaching and Physical Science
Standardized Test Scores,School Sci. Math., Vol. 103, No. 7, 2003, p. 345.
30. Londraville, R., Niewiarowski, P., Laipply, R., and Owens, K., “Inquiry-Based Laboratories for
Introductory Biology,” Int. and Comp. Bio., Vol. 42, No. 6, 2002, p. 1267.
31. Heflich, D., Dixon, J., and Davis, K., “Taking It to the Field: The Authentic Integration of
Mathematics and Technology in Inquiry-Based Science Instruction,” J. Comp. Math. Sci. Teach., Vol.
20, No. 1, 2001, p. 99.
32. Schlenker, R., and Schlenker, K., “Integrating Science, Mathematics, and Sociology in an Inquiry-
Based Study of Changing Population Density,” Sci. Act., Vol. 36, No. 4, 2000, p. 16.
33. Buch, N., and Wolff, T., “Classroom Teaching through Inquiry,” J. Prof. Issues Eng. Ed. Prac., Vol.
126, No. 3, 2000, p. 105.
34. Stahovich, T.F., and Bal, H., “An Inductive Approach to Learning and Reusing Design Strategies,”
Research in Engineering Design, Vol. 13, No. 2, 2002, pp. 109121.
35. Oliver-Hoyo, M., and Beichner, R., “SCALE-UP: Bringing Inquiry-Guided Methods to Large
Enrollment Courses,” in Lee [24], pp. 5169.
36. Hyman, M., and Luginbuhl, G., “Inquiry-Guided Learning and the Undergraduate Major in the
Department of Microbiology,” in Lee [24], pp. 129141.
37. Kirkman, A.G., Byrd, M.V., Jameel, H., and Heitman, J.A., “The Challenge of Implementing an
Inquiry-Guided Approach in a Highly Technical Curriculum,” in Lee [24], pp. 143156.
38. Rohrbach, R.P., Spurlin, J.E., Mayberry, K., and Rajala, S.A., “Engineering Computing as an
Essential Component of Inquiry-Guided Learning,” in Lee [24], pp. 157171.
39. Haury, D., “Teaching Science through Inquiry,” ERIC/CSMEE Digest, ED359048, 1993.
40. Shymansky, J., Hedges, L., and Woodworth, G., “A Reassessment of the Effects of Inquiry-Based
Science Curricula of the 60’s on Student Performance,” J. Research in Science Teaching, Vol. 27,
No. 2, 1990, pp. 127144.
41. Rubin, S., Evaluation and Meta-Analysis of Selected Research Related to the Laboratory Component
of Beginning College Level Science, Ph.D. dissertation, Temple University, 1996.
42. Colburn, A., “What Teacher Educators Need to Know about Inquiry-Based Instruction,”
<http://www.csulb.edu/~acolburn/AETS.htm>.
26
43. Barrows, H.S., and Tamblyn, R., Problem-Based Learning: An Approach to Medical Education,
New York: Springer, 1980.
44. Boud, D., and Feletti, G., The Challenge of Problem-Based Learning, 2nd ed., London: Kogan Page,
1997.
45. Dahlgren, M.A., “PBL through the Looking-Glass: Comparing Applications in Computer
Engineering, Psychology and Physiotherapy,” Intl. J. Engr. Education, Vol. 19, No. 5, 2003, pp. 672
681.
46. Norman, G.R., and Schmidt, H.G., “The Psychological Basis of Problem-Based Learning: A Review
of the Evidence,” Academic Medicine, Vol. 67, No. 9, 1992, pp. 557565.
47. Weiss, R., “Designing Problems to Promote Higher-Order Thinking,” in D.S. Knowlton and D.C.
Sharp, eds., Problem-Based Learning in the Information Age, New Directions for Teaching and
Learning, #95, San Francisco: Jossey Bass, Fall 2003, pp. 2530.
48. Tan, O.S., Problem-Based Learning Innovation, Singapore: Thomson, 2003.
49. Duch, B.J., Groh, S.E., and Allen, D.E., The Power of Problem-Based Learning, Sterling, VA: Stylus,
2001.
50. Duch, B.J., “Models for Problem-Based Instruction in Undergraduate Courses,” in Duch et al. [49],
Ch. 4.
51. Woods, D.R., Problem-Based Learning: How to Gain the Most from PBL, Waterdown, ON: Donald
R. Woods, 1994.
52. Acar, B.S., and Newman, I.A., “Students as TutorsLearning Problem-Solving Skills by Tutoring
PBL,” Intl. J. Engr. Education, Vol. 19, No. 5, 2003, pp. 712716.
53. Savin-Baden, M., and Major, C.H., Foundations of Problem-Based Learning, Maidenhead, Berks.,
England: Open University Press, 2004.
54. Tan, O.S., Little, P., Hee, S.Y., and Conway, J., eds., Problem-Based Learning: Educational
Innovation across Disciplines, Singapore: Temasek Centre for Problem-Based Learning, 2000.
55. Woods, D., A. Hrymak, R. Marshall, P. Wood, C. Crowe, T. Hoffman, J. Wright, P. Taylor., K.
Woodhouse and C. Kyle Bouchard, “Developing Problem-Solving Skills: The McMaster Problem-
Solving Program,” J. Engr. Education, Vol. 86, No. 2, 1997, pp. 7591.
56. Hoyt, B., M. Hanyak, M. Vigeant, W. Snyder, M. Aburdene, D. Hyde, E. Mastascusa and M. Prince.,
“Project Catalyst: Introducing Systemic Change in Engineering Education,” Proceedings, 31st
ASEE/IEEE Frontiers in Education Conference, Reno, NV, October 2001.
57. Prince, M., M. Aburdene, B. Hoyt, D. Hyde, E. J. Mastascusa, L. Pease. W. Snyder and M. Vigeant,
“Project Catalyst: Successes and Frustrations of Introducing Systemic Change to Engineering
Education,” Proceedings, ASEE Annual Meeting, Albuquerque, NM, June 2001.
58. Jiménez, L., Font, J., and Farriol, X., “Unit Operations Laboratory Using Ill-Posed Problems,” Intl. J.
Engr. Education, Vol. 19, No. 5, 2003, pp. 717720.
59. Hadgraft, R., “Student Reactions to a Problem-Based Fourth-Year Computing Elective in Civil
Engineering,Eur. J. Engr. Education, Vol. 22, No. 2, 1997, pp. 115123.
60. Hadgraft, R., “Problem-Based Learning: Making It Work,” in J.M. Simmons, D.F. Radcliffe, and
K.B. Wallace, eds., New Opportunities and Challenges for Engineering Education, 4th Annual
Conference of the Australasian Association for Engineering Education, University of Queensland,
1992, pp. 134139.
61. Hadgraft, R., “Experiences of Two Problem-Oriented Courses in Civil Engineering,” in J.B. Agnew
and C. Cresswell, eds., Broadening Horizons in Engineering Education, 3rd Annual Conference of the
Australasian Association for Engineering Education, University of Adelaide, 1991, pp. 292297.
27
62. Polanco, R., Calderón, P., and Delgado, F., “Effects of a Problem-Based Learning Program on
Engineering Students’ Academic Achievements in a Mexican University,” Innovations in Education
and Teaching International, Vol. 41, No. 2, 2004, pp. 145155.
63. Nelson, W.A., “Problem-Solving through Design,” in D.S. Knowlton and D.C. Sharp, eds., Problem-
Based Learning in the Information Age, New Directions for Teaching and Learning, #95, San
Francisco: Jossey Bass, Fall 2003, pp. 3944.
64. Dochy, F., Segers, M., Van den Bossche, P., and Gijbels, D., “Effects of Problem-Based Learning: A
Meta-Analysis,” Learning and Instruction, Vol. 13, 2003, pp. 533568.
65. Gijbels, D., Dochy, F., P. Van den Bossche, P., Segers, M., “Effects of Problem-Based Learning: A
Meta-Analysis from the Angle of Assessment,” Review of Educational Research, Vol. 75, No. 1,
2005, pp. 2761.
66. Vernon, D.T.A., and Blake, R.L., “Does Problem-Based Learning Work? A Meta-Analysis of
Evaluative Research,” Academic Medicine, Vol. 68, 1993, pp. 550563.
67. Dods, R.F., “An Action Research Study of the Effectiveness of Problem-Based Learning in
Promoting the Acquisition and Retention of Knowledge,” J. for the Education of the Gifted, Vol. 20,
1997, pp. 423437.
68. Chung, J.C.C., and Chow, S.M.K., “Promoting Student Learning through a Student-Centered
Problem-Based Learning Subject Curriculum,” Innovation in Education and Teaching International,
Vol. 41, No. 2, 2004, pp. 157168.
69. Sharp, D.M.M., and Primrose, C.S., “The `Virtual Family’: An Evaluation of an Innovative Approach
Using Problem-Based Learning to Integrate Curriculum Themes in a Nursing Undergraduate
Programme,” Nurse Education Today, Vol. 23, 2003, pp. 219225.
70. Lieux, E.M., “A Comparative Study of Learning in Lecture vs. Problem-Based Format,” About
Teaching, #50, Center for the Effectiveness of Teaching and Learning, University of Delaware,
Spring 1996.
71. Blumberg, B., “Evaluating the Evidence that Problem-Based Learners are Self-Directed Learners: A
Review of the Literature,” in D.H. Evensen and C.E. Hmelo, eds., Problem-Based Learning: A
Research Perspective on Learning Interactions, Mahwah, NJ: Erlbaum, 2000, pp. 199226.
72. Coles, C.R., “Differences between Conventional and Problem-Based Curricula in Their Students’
Approaches to Studying,” Medical Education, Vol. 19, 1985, pp. 308309.
73. de Graaff, E., and Kolmos, A., “Characteristics of Problem-Based Learning,” Intl. J. Engr. Education,
Vol. 19, No. 5, 2003, pp. 657662.
74. Perrenet, J.C., Bouhuijs, P.A.J., and Smits, J.G.M.M., “The Suitability of Problem-Based Learning
for Engineering Education: Theory and Practice,” Teaching in Higher Education, Vol. 5, No. 3, 2000,
pp. 345358.
75. Tan, O.S., Parsons, R.D., Hinson, S.L., and Sardo-Brown, D., Educational Psychology: A
Practitioner-Researcher Approach (An Asian Edition), Singapore: Thomson, 2003.
76. Hung, W., Bailey, J.H., and Jonassen, D.H., “Exploring the Tensions of Problem-Based Learning:
Insights from Research,” in D.S. Knowlton and D.C. Sharp, eds., Problem-Based Learning in the
Information Age, New Directions for Teaching and Learning, #95, San Francisco: Jossey Bass, Fall
2003, pp. 1323.
77. Caplow, J.H., Donaldson, J.F., Kardash, C.A., and Hosokawa, M., “Learning in a Problem-Based
Medical Curriculum: Students’ Conceptions,” Medical Education, Vol. 31, 1997, pp. 18.
78. Huvard, G., J. Bara, N. Cain, B. Crosby, J. McLees, and G. Wnek, “ChemEngine: Realizing
Entrepreneurship in Undergraduate Engineering Education,” Proceedings, ASEE Annual Conference,
American Society for Engineering Education, June 2001. More information about ChemEngine may
be obtained from Dr. Gary Huvard, gary@huvard.com.
28
79. Pavelich, M., B. Olds and R. Miller, “Real-World Problem Solving in Freshman and Sophomore
Engineering,” New Directions for Teaching and Learning, Vol. 61, 1995, pp. 45–54.
80. Rosenbaum, D.B., “Schools Erase Chalk-and-Talk,” Engineering News-Record, 9/2/1996, pp. 2430.
81. Heitmann, G., Project-Oriented Study and Project-Organized Curricula: A Brief Review of
Intentions and Solutions,” Eur. J. Engr. Education, Vol. 21, No. 2, 1996, p. 121.
82. Mills, J.E., and Treagust, D.F., Engineering EducationIs Problem-Based or Project-Based
Learning the Answer?” Australasian J. Engr. Education, 20032004,
<http://www.aaee.com.au/journal/2003/ mills_treagust03.pdf>.
83. Wessel, D., “Building a Better Engineer,” Wall Street Journal, December 20, 2005, p. B1
84. Kolmos, A., Personal Communication, 2005.
85. Jensen, L.P., Helbo, J., Knudsen, M., and Rokkj?r, O., “Project-Organized Problem-Based Learning
in Distance Education,” Intl. J. Engr. Education, Vol. 19, No. 5, 2003, pp. 696700.
86. Galand, B., and Frenay, M., L’approche par Problèmes et par Projets dans l’Enseignement
Supérieur: Impact, Enjeux et Defies, Louvain-la-Neuve: Presses Universitaires de Louvain, 2005. A
video of Professor Frenay presenting (in English) a description of the Louvain curriculum and
summarizing the assessment and evaluation of its effectiveness can be viewed at
<http://video.aau.dk/lectures/I20/I20_UCPBL.html>.
87. Thomas, J.W., A Review of Research on Project-Based Learning, San Rafael, CA: Autodesk
Foundation, 2000.
88. Kardos, G., and Smith, C.O., “On Writing Engineering Cases,” Proceedings of ASEE National
Conference on Engineering Case Studies, March 1979,
<http://www.civeng.carleton.ca/ECL/cwrtng.html>.
89. Lundeberg, M., Levin, B., and Harrington, H., Who Learns What from Cases and How? The Research
Base for Teaching and Learning with Cases, Mahwah, NJ: Lawrence Erlbaum Associates, Inc., 1999.
90. Lynn, Jr., L.E., Teaching and Learning with Cases, New York: Chatham House Publishers, 1999.
91. Kardos, G., “Engineering Cases in the Classroom,” Proceedings of ASEE National Conference on
Engineering Case Studies, March 1979, <http://www.civeng.carleton.ca/ECL/cclas.html>.
92. Lohman, M., “Cultivating Problem-Solving Skills through Problem-Based Approaches to
Professional Development,” Human Resource Development Quarterly, Vol. 13, No. 3, 2002, p. 243.
93. Herreid, C.F., “What is a Case?” J. Coll. Science Teaching, Vol. 27, No. 2, 1997, pp. 9294.
94. Fitzgeard, N., “Teaching with Cases,” ASEE Prism, 4(7), 1620 (1995).
95. Ricards, L.G., Gorman, M. Scherer, W.T., and Landel, R.D., “Promoting Active Learning with Cases
and Instructional Modules,” J. Engr. Education, Vol. 84, No. 4, 1995, pp. 375381.
96. Mayer, R., “Invited Reaction: Cultivating Problem-Solving Skills through Problem-Based
Approaches to Professional Development,” Human Resources Development Quarterly , Vol. 13, No.
3, 2002, p. 263.
97. Fasko, D., “Case Studies and Method in Teaching and Learning,” presented at the Annual Meeting of
the Society of Educators and Scholars, Louisville, KY, April 2003.
98. Adams, M.E., The Response to Eleventh Graders to the Use of the Case Method of Instruction in
Social Studies, Unpublished master’s thesis, Simon Fraser University, Bambry, B.C. (Cited in
Ciardiello, A., “A case for case-based instruction” in C.N. Hedley, P. Antonacci, and M. Rabinowitz,
eds., Thinking and literacy: The mind at work , Hillsdale NJ: Erlbaum, 1995.)
99. Levin, B., “The Influence of Context in Case-Based Teaching: Personal Dilemmas, Moral Issues or
Real Change in Teachers’ Thinking?” Paper presented at the annual meeting of the American
Educational Research Association, Chicago, April 1997. (Cited by Lundeberg et al. [89].)
100. Gabel, C., “Using Case Studies to Teach Science,” presented at the Annual Meeting of the National
Association for Research in Science Teaching, Boston, MA, March 2831, 1999.
29
101. Katsikitis, M., Hay, P.J., Barrett, R.J., and Wade, T., “Problem- Versus Case-based Approaches in
Teaching Medical Students about Eating Disorders: A Controlled Comparison,” Ed. Psychology, Vol.
22, No. 3, 2002, pp. 277283.
102. Spencer, J.A., and Jordan, R.K., “Learner-Centred Approaches in Medical Education,” BMJ (British
Medical Journal), Vol. 313, 1996, pp. 275283.
103. Leonard, W., “An Experimental Test of an Extended Discretion Laboratory Approach for University
General Biology,” J. Research in Science Teaching, Vol. 26, No. 1, 1988, pp 7991.
104. Holcomb, C., “The Effect of Degrees of Direction in the Qualitative Analysis Laboratory on
Retention of Learning,” J. Research in Science Teaching, Vol. 8, No. 2, 1971, pp. 165169.
105. Kersh, B., “Motivating Effect of Learning by Directed Discovery,” J. Ed. Psychology, Vol. 53, 1962,
pp. 6571.
106. Kittell, J., “An Experimental Study of the Effects of External Direction during Learning on Transfer
and Retention of Principles,” J. Ed. Psychology, Vol. 48, 1957, pp. 391405.
107. Wittrock, M.C., “Verbal Stimuli in Concept Formation: Learning by Discovery,” J. Educational
Psychology, Vol. 54, 1963, pp. 183190.
108. Westbrook, S., and Rogers, L., “Examining the Development of Scientific Reasoning in Ninth-Grade
Physical Science Students,” J. Research in Science Teaching, Vol. 31, No. 1, 1994, pp. 6576.
109. Singer, R. and Pease, D., “Effect of Guided vs. Discovery Learning Strategies on Initia l Motor Task
Learning, Transfer and Retention,” The Research Quarterly, Vol. 49, No. 2, 1978, p. 206.
110. Just-in-Time Teaching Web site, <http://webphysics.iupui.edu/jitt/jitt.html>.
111. Modesitt, K.L., Maxim, B., and Akingbehin, K., “Just-in-Time Learning in Software Engineering,” J.
Computers in Mathematics and Science Teaching, Vol. 18, No. 3, 1999, pp. 287301.
112. Novak, G.M., Patterson, E.T., Gavrin, A.D., and Christian, W., Just-in-Time Teaching: Blending
Active Learning with Web Technology, Upper Saddle River, N.J.: Prentice-Hall, 1999.
113. Rozycki, W., “Just-in-Time Teaching,” <http://www.indiana.edu/~rcapub/v22n1/p08.html>.
114. Hake, R., “Interactive-Engagement vs. Traditional Methods: A Six-Thousand-Student Survey of
Mechanics Test Data for Introductory Physics Courses,” Am. J. Physics, Vol. 64, No. 1, 1998, p. 66.
115. Mager, R.F., Preparing Instructional Objectives, 3
rd ed., Atlanta, GA: Center for Effective
Performance, 1997.
116. Gronlund, N.E., How to Write and Use Instructional Objectives, 6th ed., Upper Saddle River, NJ:
Prentice-Hall, 2000.
117. Felder, R.M., and Brent, R., “Designing and Teaching Courses to Satisfy the ABET Engineering
Criteria,” J. Engr. Education, Vol. 92, No. 1, 2003, pp. 725, <http://www.ncsu.edu/felder-
public/Papers/ ABET_Paper_(JEE).pdf>.
118. Smith, K.A., Sheppard, S.D., Johnson, D.W., and Johnson, R.T., “Pedagogies of Engagement:
Classroom-Based Practices,” J. Engr. Education, Vol. 94, No. 1, 2005, pp. 87101.
119. Felder, R.M., and Brent, R., “Navigating The Bumpy Road to Student-Centered Instruction,” College
Teaching, Vol. 44, No. 2, 1996, pp. 4347, <http://www.ncsu.edu/felder-public/Papers/Resist.html >.
30
AUTHOR’S BIOGRAPHIES
Michael Prince is a professor in the Department of Chemical Engineering at Bucknell
University, where he has been since receiving his Ph.D. from the University of California at
Berkeley in 1989. He is the author of several education-related papers for engineering faculty
and gives faculty development workshops on active learning. He is currently continuing the work
of Project Catalyst, an NSF-funded initiative to help faculty re-envision their role in the learning
process, and researching the use of inductive teaching methods to correct common student
misconceptions in engineering. Address: Department of Chemical Engineering, Bucknell
University, Lewisburg, PA 17837; telephone: 570-577-1781; e-mail: prince@bucknell.edu.
Richard M. Felder is Hoechst Celanese Professor Emeritus of Chemical Engineering at North
Carolina State University. He received his BChE from City College of New York and his PhD
from Princeton University. He is coauthor of the text Elementary Principles of Chemical
Processes (Wiley, 2005) and co-director of the ASEE National Effective Teaching Institute.
Address: Department of Chemical Engineering, N.C. State University, Raleigh, NC 27695-
7905; e-mail: rmfelder@mindspring.com.
... Constructivist pedagogies like problem-based learning (PBL) and project-based learning (PBL) engage students in real-world contexts where teachers direct learners to practice problem-solving and critical thinking. Engaging with new knowledge through links to previous experiences enhances retention (Prince & Felder, 2006). Project-based learning, for example, grounds learning in authentic, ill-structured problems that students need to collaboratively address (Land & Jonassen 2012), thus making the learning experience more significant and memorable. ...
... Scaffolding enables students to tackle increasingly complex tasks by initially providing guidance, which helps them develop confidence and autonomy. Scaffolding supports students in developing knowledge incrementally, one step upon the next upon the last, allowing for consolidation of learning and making it easier to use new information (Reiser & Tabak, 2014). This implies that students have acquired the ability to handle increasingly complex material gradually, which likely contributes to its retention. ...
... López-Pastor et al. discuss three examples of PjBL, problem-based learning (PBL), and other models, demonstrating how most constructivist approaches align well with the principles of AfL. When integrated into PjBL and PBL environments, AfL allows students to receive continuous feedback on their knowledge and performance, which facilitates an iterative process of both improvement as well as meaningful learning (Prince & Felder, 2006). According to Sadler (1989), providing formative feedback at a specific stage of a project, as opposed to after its completion, enables students to effectively apply their problem-solving skills and comprehend the retention of complex concepts. ...
Article
Full-text available
Learning retention, the ability to retain and recall information over time, is fundamental to academic success, particularly in higher education. This study examines the impact of the Assessment for Learning (AfL) framework on learning retention among undergraduate students, focusing on formative assessment's role in fostering long-term knowledge retention. AfL goes beyond this by incorporating elements such as self-assessment, goal setting, and peer-assessment, all of which can evoke richer feedback loops and more extensive reflective practice, thereby promoting active interaction with content. Quantitative findings, in line with Black and Wiliam's (2009) and Carless's (2015) theories on the benefits of in-class formative assessment, specifically Assessment for Learning (AfL) activities, showed a 27.2% increase in retention rates among students participating in these activities compared to a control group. Qualitative insights from interviews reveal that AfL practices foster self-regulation and collaborative learning, with students noting enhanced responsibility, motivation, and peer connections. The AfL framework supports students' transition from surface learning to deep engagement with material, leading to improved academic performance. This research highlights AfL's potential for enhancing learning retention in higher education and recommends embedding formative feedback, self-assessment, and collaborative learning tools into curricula. The study offers a foundation for future research on AfL's application across diverse disciplines, aiming to promote sustained learning outcomes and equip students with durable, transferable skills essential for lifelong learning.
... Los resultados de este estudio, tanto cualitativos como cuantitativos, respaldan investigaciones previas, como las realizadas por (Prince & Felder, 2006), que resaltan la importancia de la instrucción activa en el fomento de habilidades cognitivas superiores. En el ámbito de la educación secundaria, los alumnos del grupo experimental demostraron una mayor habilidad en la capacidad de análisis y resolución de problemas en contraste con los que fueron instruidos de manera convencional. ...
... La mejora en la motivación y compromiso de los estudiantes que participaron en el Aprendizaje Basado en Problemas (ABP) indica que esta metodología no solo estimula el pensamiento crítico, sino también la actitud de los estudiantes hacia el proceso de aprendizaje. En la educación secundaria, la transición hacia la vida adulta demanda habilidades cognitivas y emocionales complejas, lo cual es un aspecto de gran relevancia, como señalan Condliffe et al. (2019) y Prince & Felder (2006). A pesar de los avances alcanzados, en el estudio se identifican ciertas restricciones, tales como la brevedad del periodo de intervención y la importancia de la formación continua del profesorado para garantizar una ejecución eficaz del Aprendizaje Basado en Problemas (ABP). ...
Article
Full-text available
En el presente estudio se examina el impacto del Aprendizaje Basado en Proyectos (ABP) en la mejora de las habilidades de pensamiento crítico en alumnos de educación secundaria. En un entorno donde se aprecian cada vez más las habilidades de pensamiento crítico, el Aprendizaje Basado en Problemas (ABP) ha adquirido relevancia como una metodología de enseñanza activa y centrada en el estudiante. Este enfoque está diseñado para fomentar la resolución de problemas, la colaboración y la creatividad. El estudio se llevó a cabo con alumnos de bachillerato de edades comprendidas entre 16 y 18 años. Fueron divididos en dos grupos: uno experimental, que recibió enseñanza a través del Aprendizaje Basado en Problemas (ABP), y otro de control, que siguió métodos tradicionales de enseñanza. El principal propósito del estudio consistió en observar y comparar el progreso de las habilidades de pensamiento crítico en ambas muestras. En el transcurso de la investigación, los alumnos del grupo experimental se dedicaron a la realización de proyectos interdisciplinarios extensos, los cuales demandaban la realización de investigaciones, el análisis y la síntesis de información, así como la presentación de los resultados obtenidos. Los proyectos fueron concebidos con el propósito de representar situaciones reales, lo cual posibilitó a los estudiantes establecer vínculos entre los conceptos teóricos y sus aplicaciones prácticas. La recopilación de datos consistió en la administración de pruebas de pensamiento crítico antes y después de la intervención, así como en la realización de entrevistas y observaciones en el aula para obtener información cualitativa sobre el proceso de enseñanza-aprendizaje y la participación de los estudiantes. Los resultados del estudio indicaron que los estudiantes pertenecientes al grupo experimental experimentaron una mejora significativa en competencias fundamentales de pensamiento crítico. Estas competencias incluyen la capacidad de analizar evidencias, interpretar datos, desarrollar argumentos coherentes y tener en cuenta diversas perspectivas. Por el contrario, el grupo de control presentó un avance restringido en dichas áreas. Los estudiantes del grupo experimental demostraron un aumento en la motivación y compromiso con el aprendizaje, además de mejoras en el pensamiento crítico. Esto se atribuye a su percepción de mayor responsabilidad y autonomía en su proceso educativo. En resumen, el estudio confirma que el Aprendizaje Basado en Proyectos es una estrategia efectiva para fomentar el desarrollo de habilidades de pensamiento crítico en alumnos de nivel preuniversitario. Según el estudio, el Aprendizaje Basado en Problemas no solo contribuye al desarrollo de habilidades académicas en pensamiento crítico, sino que también promueve una mayor implicación, cooperación y entusiasmo en el proceso de enseñanza-aprendizaje. Se sugiere la incorporación de esta herramienta en los planes de estudio de bachillerato, ya que es fundamental para la preparación de los estudiantes ante los retos académicos y laborales, fomentando la adquisición de habilidades esenciales para el siglo XXI.