Yongseok Cho

• Kookmin University

In the American continent, the most frequently used alternative fuel is ethanol. Especially in Brazil, various blends of gasoline–ethanol fuels are widely spread. The vehicle using blended fuel is called flexible fuel vehicle. Because of several selections for the blending ratios in gas stations, the fuel properties may vary after refueling dependi...

The strengthening of regulations on diesel-engine exhaust emission has demanded performance improvements, including those on the pressure-enhanced common-rail fuel-injection system. The common-rail fuel-injection tube must meet the extreme fatigue reliability requirements in this system to endure the pulsations caused by the high injection pressure...

Finding an alternative fuel and reducing environmental pollution are the main goals for future internal combustion engines. The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched LPG fuel in a LPG engine. An experimental study was carried out to obtain fundamental data for the emit HC emission characteristics a...

As a demand for an automobile increases, air pollution and a problem of the energy resources come to the fore in the world. Consequently, governments of every country established ordinances for green-house gas reduction and improvement of air pollution problem. Especially, as international oil price increases, engine using clean energy are being de...

The demand for NOx after-treatment system has increased dramatically due to the stricter NOx emission regulations for diesel vehicles. The urea-SCR system is one of the NOx after-treatment methods found to be quite effective to meet the regulation requirement enforced by various authorities including the Euro-6. In order to develop an effective ure...

The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched LPG fuel in LPG engine and is to clarify the effects of hydrogen enrichment in LPG fuelled engine on exhaust emission and performance. An experimental study was carried out to obtain fundamental data for performance and emission characteristics of hydrogen...

This study aims to investigate the combustion characteristics of mixed fuel of liquefied propane gas (LPG) and biodiesel under compression ignition (CI) in an effort to develop highly efficient and environmentally friendly mixed fuelbased CI engines. Although LPG fuel is known to be eco-friendly due to its low CO2 emission, LPG has not yet been wid...

Finding an alternative fuel and reducing environmental pollution are the main goals for future internal combustion engines. The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched LPG fuel in constant volume chamber. An experimental study was carried out to obtain fundamental data for the combustion and emission...

A typical cooling system of an engine relies on a water pump that circulates the coolant through the system. The pump is typically driven by the crankshaft through a mechanical link with engine starting. In order to reduce the friction and warm-up time of an engine, the clutch-type water pump (CWP) was applied in 2.0 liter diesel vehicle. The clutc...

In an effort to reduce the dependency on crude oil based fuels and to decrease pollutant emissions, hydrogen-CNG (HCNG) attracted a considerable attention with its low HC/CO2 emission and fast burn rate. In this study, a constant volume chamber with a single spark plug and a dual spark plug configuration was designed to obtain fundamental combustio...

Finding an alternative fuel and reducing environmental pollution are the main goals for future internal combustion engines. Hydrogenmethane (HCNG) is now considered an alternative fuel due to its low emission and high burning rate. An experimental study was carried out to obtain fundamental data for the combustion and emission characteristics of pr...

Fuel reforming technology for the fuel cell vehicles has been frequently applied to internal combustion engine for the reduction of engine out emissions. Since syngas which is reformed from fossil fuel has hydrogen as a major component, it has abilities to enhance the combustion characteristics with wide flammability and high speed flame propagatio...

To satisfy the needs on fuel economy and engine performance, continuous variable valve lift systems are applying to engines. In the CVVL system, fuel economy can be improved by reducing pumping loss during the induction process, and engine performance can be also improved by controlling volumetric efficiency and the residual gas fraction. Because t...

The continued rise in the number of automobiles on the roads is prompting air pollution to emerge as a serious problem due to the harmful exhaust gas emissions throughout the world. Specifically, based on the exhaust gas regulation in North America represented by PZEV, the regulation on evaporative emission, which originates from the intake manifol...

When soot particles are loaded in a diesel particulate filter, it causes increase in back pressure of the exhaust system. To minimize this pressure drop due to DPF, the filter needs to be regenerated after a certain amount of soot has been accumulated. It is crucial to estimate the correct amount of soot that has been accumulated by measuring the d...

The catalyzed diesel particulate filter (CDPF) is widely used for collecting soot from the exhaust gas of diesel engine. However, the CDPF need being regenerated after the soot accumulation. It is important to know characteristics of regeneration for CDPF with variation of exhaust gas temperature and composition. This study presents characteristics...

This research aims to obtain fundamentals regarding overall combustion characteristics of pre-mixed and direct injected type CNG fuel inside a constant volume chamber. A visualization technique was introduced to a constant volume chamber in order to investigate combustion and emission characteristics of premixed and direct injected type CNG fuel in...

Emission regulations for automobiles have become more stringent and the improvement of emission during cold start has been a major key issue to meet these regulations. Among many kinds of factors that affect cold start operation, ignition timing is crucial to improve emission characteristics due to the influence on exhaust gas temperature. Recent p...

A closed type crankcase ventilation system has been adopted to engines to prevent emission of blow-by gas to atmosphere. In the early closed type crankcase ventilation system, blow-by gas which contains engine lubricating oil is re-circulated into the intake system. The blow-by gas containing oil mist leads to increased harmful emissions and engine...

Since regulations of exhaust emissions are continuously reinforced, studies to reduce harmful emissions during the cold start period of SI engines have been carried out very extensively worldwide. During the cold start period, raising the temperature of cold exhaust gas is a key strategy to minimize the light-off time of three way catalysts. In thi...

A synthetic gas reformed from hydrocarbon-based fuels consists of , CO and . Hydrogen contained in the synthetic gas is a very useful species in chemical processes, due to its wide flammability range and fast burning speed. The ESGI (Exhaust Synthetic Gas Injection) technology is developed to shorten the light-off time of three way catalysts throug...

Fuel reforming technology for the fuel cell vehicles could be adopted to internal combustion engine for the reduction of engine out emissions. Since syngas which is reformed from fossil fuel has hydrogen as a major component, it has abilities to enhance the combustion characteristics with wide flammability and high speed flame propagation. In this...

Stringent regulations of exhaust emission from vehicles become a major issue in automotive industries. In SI engines, it is one of the crucial factor to reduce exhaust emissions during cold start in order to meet stringent regulations such as SULEV or EURO-4, because SI engines emit a large portion of total harmful exhaust compounds when they are c...

Emission reduction in the cold start period of SI engines is crucial to meet stringent emission regulations such as SULEV. Emissoin reduction is the starting point of the study in the which the variable valve timing (WT) technology may be one promising method to minimize cold start emissions while maintaining engine performance. This is because it...

Residual gas fraction in a combustion process is very crucial to improve combustion and cyclic variations. Especially, the residual gas fraction is strongly affected by backflow of the residual gas during the valve overlap period in an idle operation. Therefore, it is one of the most interesting that valve timings can affect flow characteristics of...

In new generation vehicle technologies, a fuel cell vehicle becomes more important, by virtue of their emission merits. In addition, a fuel cell is considered as a major source to generate the electricity for vehicles in near future. This paper focuses on modeling of not only an electric vehicle and but also a fuel cell vehicle to estimate performa...

The effects of spark timing and exhaust valve timing change on exhaust gas temperature during cold start period of an SI engine are studied through engine bench tests. The exhaust gas temperature increases when the spark timing or valve timing are retarded individually, due to late combustion or slow flame speed. Therefore, exhaust gas temperature...

Most of the pollutants from passenger cars are emitted during the cold-transient phase of the FTP-75 test. In order to reduce the exhaust emissions during the cold-transient period, it is essential to warm up the catalyst as fast as possible after the engine starts, and the Unburned Exhaust Gas Ignition (UEGI) technology was developed through our p...

Experimental study of variation of exhaust gas temperature was carried out with the changes of spark timing and exhaust valve timing during the cold start operation of an SI engine. To investigate the effects of these variables on combustion stability, cylinder pressure and exhaust gas temperature were measured and analyzed. Experimental results sh...

Results from an experimental study of flow distribution in a close-coupled catalytic converter (CCC) are presented. The experiments were carried out with a flow measurement system specially designed for this study under steady and transient flow conditions. A pitot tube was a tool for measuring flow distribution at the exit of the first monolith. T...

Results from an experimental study of flow distribution in a close-coupled catalytic converter (CCC) are presented. The experiments were carried out with a flow measurement system specially designed for this study under steady and transient flow conditions. A pitot tube was a tool for measuring flow distribution at the exit of the first monolith. T...

The effects of spark timing and exhaust valve timing change on exhaust gas temperature during cold start of an SI engine are studied through engine bench tests. It is observed that the exhaust gas temperature increases when the spark timing and valve timing are retarded individually or simultaneously, due to late combustion or slow flame speed. How...