Veerandra Patil

• Bachelor of Engineering
• Acropolis Institute of Technology and Research

Hydropower, the power generated by the flow of flowing water. It is one of the most suitable as well as efficient sources of energy. Hydro-power is an efficient source of renewable energy and it has various potential application for future power generation needs cannot be underestimated. It is one of the most efficient, secure and reliable way gene...

Hydropower, the power generated by the flow of flowing water. It is one of the most suitable as well as efficient sources of energy. Hydro-power is an efficient source of renewable energy and it has various potential application for future power generation needs cannot be underestimated. It is one of the most efficient, secure and reliable way gene...

Design and development of new product is key to success in current business scenario. Product design and development process is having few fundamental steps as well as some auxiliary step to follow for customer delight and profitability. This paper is used to demonstrate fundamental and auxiliary step including rational design, empirical design, an...

Casting is a manufacturing process in which a fluid material is filled a form, which contains an empty cavity of the ideal shape, and afterward permitted to solidify. The solidified part is known as a casting, which is shot out or broken out of the shape to finish the process. Casting materials are generally metals or different cold setting materia...

Lathe is a machine tool utilized for machining the cylindrical aspects, and also used for the turning of conical aspects etc. In this article, the dimensional analysis (D-A) methodology is utilized to develop the empirical model of material removal rate (MR-R). The various process factors involved in the experimental work are speed, feed, and depth...

Most of the industries are concerned with flow measurement and accurate measurement of fluid is important to obtain specific proportion as per process requirement. Generally Venturimeter (VM) is utilized in enterprises due to notable highlights offered by it. VM works on the principle of pressure difference i.e. Bernoulli's principle. By varying cr...

The impact of machine feed rates of Wire Electric Discharge Machining on the kerf-width (K-width), material-removal-rate (MR-R), and surface-roughness (S-R) in the machining of Al/SiC composite is practically analysed. The relation among the feed rates of machine and K-width, MR-R, S-R is graphically acquired. It is demonstrated that lesser rate of...

In the today's competitive era, it is very important to an edge over the others to survive and flourish. One of the easiest yet most complicated areas to expertise is ‗fast delivery' and to obtain that the cycle time has to be reduced. Keeping this in mind certain investigations are carried out to increase the material removal rate. This research w...

In this research article, prototype of thermoelectric refrigeration system working has been designed and fabricated. This fabricated system is working on DC voltage, which is generated by the photo voltaic cells. The developed experimental prototype is having a refrigeration space of 1 liter capacity, which is refrigerated by using four numbers of...

With competitive pressures placing an increasing dependence on the ability of organizations to deliver customer adapted products quickly and on time, logistics has been an area that has been subjected to investigation. While, there is a growing evidence of organizations increasingly seeking to outsource their logistics activities, there have been f...

This paper sets up the M/M/1 queuing model, analyses the traffic intensity of Palasia intersection (Indore city, India) through analyzing the queuing theory deeply, and uses the model to analyze the settings of the lane and signal timing that is based on a certain degree of accuracy.

Nowadays, the requirements and dependency of people on vehicles are increasing day by day which lead to high emission of flue gases and it results in the severe environment pollution. Many researchers have done research to improve the efficiency of IC engine. The main reason for less efficiency is the incomplete combustion of fuel in the IC engine....

Optimization is one of the best techniques used in manufacturing industries for improving quality of product with lower cost. This report describes the effective approach for the single response optimization of drilling parameters based on the Taguchi's method. This research work also reported about the influence of input process parameters i.e. sp...

Wire electrical release machining (Wire-EDM) is one of the generally acknowledged advanced machining procedures used to machine the parts with unpredictable shapes and profiles. The wire is gradually sustained through the material and the generated electrical releases among the wire and work-piece are responsible to cut the work piece. Wire is gene...

With competitive pressures placing an increasing dependence on the ability of organizations to deliver customer-adapted products quickly and on time, logistics has been an area that has been subjected to investigation. While, there is a growing evidence of organizations increasingly seeking to outsource their logistics activities, there have been f...

The objective of this experimental investigation is to provide the two stroke petrol engine which has higher efficiency along with lower fuel consumption. Lower will be the fuel consumption, engine will be more economical.

Energy consumption all over the world is increasing rapidly and there is pressing need to develop ways to conserve energy for future generation. The conventional refrigeration system consumes very large amount of power (about 1.5 KW). Also for cooling, Evaporative coolers are the better option. The cost of Evaporative coolers is low and also it con...