About
42
Publications
2,768
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
72
Citations
Introduction
Mining machines, Mining and transport machines, Open cast mining, open-loop cyclic-flow technology, open-cast mobile complexes
Skills and Expertise
Current institution
Current position
- Head of the Department "Mining Electromechanics"
Additional affiliations
September 2021 - present
January 2020 - March 2021
Position
- PhD
Description
- Associate Professor of the Department of Mining Electromechanics
Education
September 1993 - June 1998
Ташкентский государственный технический университет
Field of study
- Mining machinery and equipment, Open pit mining
Publications
Publications (42)
Currently, the development of overburden rocks of coal deposits uses cyclic-flow technology
(CCT) using mobile crushing, reloading and conveyor systems (MDPC). In this area, there is a need to carry
out scientific research to determine the technological parameters of the face, to substantiate the scope of
technological complexes of quarries using M...
в статье рассматривается новая технологическая схема отработки уступов с применением мобильных комплексов
В работе приведена методика определения времени отработки и производительности экскаватора при разработке наклонного съездного уступа угольных разрезов. Произведен расчет времени отработки съездного уступа и определена средняя эксплуатационная производительность экскаватора в условиях Ангренского угольного разреза. Разработана математическая модель...
Ushbu maqolada konchilik korxonalarida ishlatiladigan konveyer roliklarining ishdan chiqishi sabablari atroflicha tahlil qilingan. Konveyerlarda sodir bo‘ladigan buzilishlar va baxtsiz hodisalarning sabablaridan biri konveyer roliklarining ishdan chiqishi ekanligi asoslangan. Konveyer roliklari nosozliklarining statistik ma’lumotlari keltirilgan. T...
This article discusses the use of belt conveyors for transporting overburden from open pits. The main technical and economic parameters of powerful belt conveyors that operate as part of a cyclic-flow technology for the development and transportation of rocks are given. The main conclusions on the effective use and further development of belt conve...
The paper substantiates and proposes a method for selecting mechanization tools for crushing and conveyor complexes as part of cyclic-flow technology in open-pit mining. The proposed methodology justifies the types of means of mechanization of the crushing and conveyor complex used at the Yoshlik-1 quarry of JSC “Almalyk mining and metallurgical co...
The main task of these studies is to establish an economically feasible mode of operation of quarry vehicles and minimize downtime of excavators and dump trucks involved in the work of the EAC, due to which an increase in the operational productivity of the EAC is achieved. The Kalmakir deposit was discovered in the mid-20s and has been mined since...
Scientific Journal Impact Factor SJIF 2022: 5.947 Advanced Sciences Index Factor ASI Factor = 1.7 123 w www.oriens.uz August 2022 ОПРЕДЕЛЕНИЕ ЭКОНОМИЧЕСКОЙ ЭФФЕКТИВНОСТИ ЭКСКАВАТОРНО-КОНВЕЙЕРНЫХ И ЭКСКАВАТОРНО-АВТОМОБИЛЬНЫХ КОМПЛЕКСОВ ПРИ РАЗРАБОТКЕ ВСКРЫШНЫХ УСТУПОВ АНГРЕНСКОГО УГОЛЬНОГО РАЗРЕЗА https://doi.org/ 10.5281/zenodo.7015802 Аннакулов Т....
Ушбу мақолада автомобил-конвейер транспортининг қисқача тарихига ва карьерларда даврий-узлуксиз технологияларни жорий қилишда ушбу транспорт турини қўллашнинг аҳамияти ҳақида қисқача тўхталиб ўтилган, тоғ жинсларини ташишдаги афзалликлари келтирилган, турли шароитларда ушбу транспорт туридан фойдаланиш ва унинг ривожланиш йўллари ҳақида фикр билдир...
Bugungi kunda Respublikamiz karyerlarida portlatish texnologiyalaridan foydalanish
samaradorligini oshirish, skvajina zaryadi konstruksiyasi va portlovchi moddaning maqbul
The article describes the methodology for calculating energy consumption when transporting overburdened rocks to the inner dump at Angren section using belt conveyors and dump trucks. By results of research, it is defined that at working off overburden benches using motor transport-specific power inputs for loading and transportation to internal du...
В статье рассматриваются эксплуатационные показатели ленточных конвейеров, применяемых в разрезе Ангренский. Приведены результаты расчетов коэффициента сопротивления движению на роликах ленточных конвейеров по сравнению заводскими характеристиками.
В данной работе рассматривается существующая состояния и перспективы развития горных работ на угольном разрезе “Ангренский”. Приведены результаты расчетов производственных мощностей по новому проектному решению разработки разреза Ангренский.
The article describes the methodology for calculating energy consumption when transporting overburdened rocks to the inner dump at Angren section using belt conveyors and dump trucks. By results of research, it is defined that at working off overburden benches using motor transport-specific power inputs for loading and transportation to internal du...
This article presents the results of studies to establish the optimal entry width for an excavator working in conjunction with mobile crushing plants in the development of overburden of the Angren open pit. According to the results of the research, an analytical relationship was established to determine the maximum productivity of the mining system...
Мақолада Деҳқонобод калий кони шароитида комбайнли комплексларни ишлатиш масалалари
кўриб чиқилган. Комбайннинг ишлатиш кўрсатгичларини назорат қилиш бўйича услубий
тавсиялар ишлаб чиқилган, аниқ кон-техник шароитларда комбайндан фойдаланиш, комбайнли
комплекс таркибидаги машиналарнинг оптимал ишлатиш кўрсатгичлари асослаб берилган
This article discusses the issues of increasing the productivity of excavator-automobile complexes of
open pits. The main reasons for the decrease in the productivity of the complex have been studied. The
analysis of the complex downtime is carried out and the ways of their reduction are recommended
В статьи изложены методика расчета энергопотребления при транспортировании вскрышных
горных пород до внутреннего отвала в условиях разреза Ангренский при использовании
ленточных конвейеров и автосамосвалов. По результатам исследований определены, что при
отработке вскрышных уступов с применением автомобильного транспорта удельные
энергозатраты на п...
The article presents the results of studies to establish the optimal entry width for an excavator working
in conjunction with mobile crushing plants in the development of overburden of the Angren open pit.
According to the results of the research, an analytical relationship was established to determine the
maximum productivity of the mining syst...
The paper posed and solved the problem of determining the average service life of the belt conveyor rollers, which are used in the development of the conditions of overburden benches in the Angren open pit. The tasks of this work are considered to be the determination of the service life of the conveyor rollers by studying the static and dynamic lo...
This article provides information on the use of cyclical-flow technologies at the Angrencoal mine of the Republic of Uzbekistan. The method for determining the development time and productivity of the complex during the development of overburden benches in the Angren coal mine is presented. The technological scheme of the development of benches by...
This article analyses the use of cyclic-flow technology schemes with mobile crushing and reloading complexes in open cast mining. An analysis of the application of cyclic-flow technology schemes with mobile crushing and reloading complexes in open cast mining shows that the main directions of its radical improvement are the development, creation an...
CITATIONS 0 READS 11 3 authors, including: Some of the authors of this publication are also working on these related projects: Совершенствование технологии разработки вскрышных полускальных пород угольных месторождений с мобильными дробильно-перегрузочными комплексами View project
This article provides a methodology for determining the working time and productivity of mobile excavator-crushing and conveyor complexes in the development of an inclined exit ledge. At different bottom heights, the fill factor of the excavator bucket is determined. A mathematical model has been developed to determine the area of the excavator dig...
In given article proved application the modern technological scheme oC is cyclic-line technology oC dredging mining breeds in
the conditions oC a sectional open-cast mine oC Angren with use oC the intracareer mobile crusher-reloading complexes operatively moved on
working horizons career aer moving oC excavator.
The experience on implementation and using of cyclical-and-continuous method (CCT) on the open-pit coal
mine "Angrenskiy", and also the upcoming priority measures on improving the technical parameters and effective
use of new technology is considered in this work.
The method of calculating the technological parameters of sets of equipments of mobile crushing, reloading and
conveyor complexes at open cast mining has been substantiated and proposed.
Целью настоящей работы является исследование применение альтернативных видов транспорта при перевозке руды из карьера Мурунтау на заводе ГМЗ-2. В качестве альтернативных видов транспорта рассматриваются конвейерный транспорт и ныне существующих железнодорожной транспорт.
Разработка методика расчета и выбора технологических параметров оборудований мобильных дробильно-перегрузочно-конвейерных комплексов для повышения технико-экономических показателей разработки угольных месторождений.
This paper analyzes the use of periodic-continuous technologies with mobile complexes in the open mining of mineral deposits. The advantages and disadvantages of
periodic and continuous technological systems used with progressive and mobile
crushing and loading systems, as well as the main trends in the improvement of these
technologies.
Конвейерный транспорт и тенденции его развития
Abstract: In the development of overburden rocks of coal deposits, cyclic-flow technology (CPT) is applied
using mobile crushing, reloading and conveyor complexes (MDPC). In this area, it becomes necessary to
carry out scientific research to determine the reliability of the elements of the complex used when using
MDPC. In this paper, the probabilit...
A technique has been developed for selecting and calculating the technological parameters of sets of equipment for mobile crushing, reloading and conveyor complexes.
A technique has been developed for selecting and calculating the technological parameters of sets of equipment for mobile crushing, reloading and conveyor complexes.
