Taufik Roni Sahroni

• Bina Nusantara University, Jakarta

This project presents the implementation of green productivity methodology for furniture industry. The main issue in furniture industry is reducing environment pollution and industry waste. The objective of this study is ti apply and implement the green productivity methodology in furniture industry to carry out the environment and waste problems....

This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) me...

This paper presents the design of sustainable paper bicycle which describes the stage by stage in the production of paper bicycle. The objective of this project is to design a sustainable paper bicycles to be used for children under five years old. The design analysis emphasizes in screening method to ensure the design fulfil the safety purposes. T...

This paper presents the design of welded joint based on transient thermal condition. Resistance spot welding is a fast, easily automated and easily maintained process with high productivity. This paper was performed to investigate the design parameters of sheet metal welded joint based on transient thermal condition. The transient thermal condition...

This paper presents the modeling and simulation of offshore wind power platform for oil and gas companies. Wind energy has become the fastest growing renewable energy in the world and major gains in terms of energy generation are achievable when turbines are moved offshore. The objective of this project is to propose new design of an offshore wind...

This paper present the investigation of sandwich model in the view of its properties. The objective of this paper is to define the mechanical properties of LM6 model and sandwich model. In recent years, researchers have viewed polymer matrix composite (PMC) as a potential material to increase the overall performance of materials for various type of...

This paper presents the mechanical properties of oil palm empty fruit bunch (OPEFB) fiber/epoxy resin reinforced cast LM6 (aluminum based) alloy composites. The metal matrix composite was fabricated by incorporating OPEFB/epoxy resin using mono filaments concept in the as cast LM6 alloys. Three different diameters (10, 12 and 14 mm) of the maximum...

This paper presents the modeling and simulation of gripping system for multi vacuum manifold in semiconductor industry. The objective of this study is to design the new gripping system for multi vacuum manifold using modeling and simulation. The parameter of air flow in manifold system was the main factor that influences the performance of multi va...

This study focused on synthesising a peroxide-initiated maleic anhydride-g-ethylene-propylene copolymer via melt grafting using a Haake internal mixer at high shear rate. The effect of maleic anhydride and dicumyl peroxide percentage on the grafting efficiency of maleic anhydride onto ethylene-propylene copolymer chains was carried out through a tw...

This paper presents fatigue life analysis of high performance motorcycle disc brake. The design parameter such as stress, deformation and safety factory that influences the disk brake on a high performance motorcycle were investigated. The simulation of static structural analysis of high performance motorcycle is successfully presented on 3 propose...

This paper presents the mould design analysis of casted natural fibre-metal matrix composites material. The natural fibre composites were introduced to the metal matrix as reinforced material for emerging new material. The pattern for sand casting was made from LM6 as metal matrix alloy, titanium carbide as reinforced material, and empty fruit bunc...

This paper presents the design and optimization of runner and gating systems for permanent mould casting. Fluid flow effect influences the casting quality. The design parameters for permanent mould casting were identified. The generation of runner and gating system were selected. There were four design concepts to simulate the static pressures, vel...

This paper presents the design and optimization of runner and gating systems for permanent mould casting. Fluid flow effect influences the casting quality. The design parameters for permanent mould casting were indentified. The generation of runner and gating system were selected. There were four design concepts to simulate the static pressures, ve...

This paper presents the mould design analysis of casted natural fibre-metal matrix composites material. The natural fibre composites were introduced to the metal matrix as reinforced material for emerging new material. The pattern for sand casting was made from LM6 as metal matrix alloy, titanium carbide as reinforced material, and empty fruit bunc...

This study presents collaboration between a textile manufacturing company in Malaysia and Universiti Teknikal Malaysia Melaka. In this Company-University Collaboration (CUC), Single Minute Exchange of Die (SMED) was introduced in the company to improve the time-consuming changeover process of its stamping machine. The framework of this study involv...

This paper presents the investigation of casted natural fiber-LM6 composites for engineering application. The objective of this research is to study the feasibility of natural fibre to introduce in the metal matrix composites for sand casting process. LM6 is the core material used in this research while natural fibre used as composite materials as...

This paper presents the design and development of a model for predicting the casting quality of aluminium silicon carbide based on the first-order shear deformation theory (FSDT) and thermal expansion behaviour. The coefficient of thermal expansion (CTEs) of casted aluminium silicon carbide fibre reinforced material was significantly influenced by...