
Surya Prakash SinghRajkiya Engineering College Ambedkar Nagar · Electrical Engineering
Surya Prakash Singh
Doctor of Philosophy
About
138
Publications
45,503
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
650
Citations
Introduction
Dr. S. P. Singh is an Associate Professor in the Electrical Engineering Department of Rajkiya Engineering College, Ambedkar Nagar since December 30, 2017. Before joining Rajkiya Engineering College, Ambedkar Nagar, he was an Assistant Professor in the Electrical Engineering Department at Kamla Nehru Institute of Technology, Sultanpur since January 06, 2009 to December 29, 2017.
Additional affiliations

Independent Researcher
Position
- Associate Professor
Education
July 2003 - July 2005
Publications
Publications (138)
A NOVEL THREE-PHASE TO SEVEN-PHASE TRANSFORMER
MAXIMUM POWER POINT TRAKER FOR
SOLAR PANEL
MAXIMUM POWER POINT TRAKER FOR
SOLAR PANEL
Several strong to great earthquakes occurred in northeast India, indicating that the region is seismically very active. For a better understanding of the complex nature of tectonics in the Eastern Himalaya, a frequency-dependent attenuation relation based on coda waves is developed. The backscattering model of Aki and Chouet (J. Geophys. Res. 80: 3...
We statistically analyzed the fmax-model, κ-model and stress drop (Δσ) using surface and borehole data of the KIK-NET Japan seismological network. The statistical tests show no contribution of source in the fmax-model and κ-model. The ‘fmax’ values obtained in the present study are 4.2–11.0 Hz and 5–11.0 Hz for surface and borehole data, respective...
Rainfall during the monsoon across the Indian subcontinent leads to significant hydrological changes that alter the ground over a range of timescales. In the present study, both GPS and Grace data have been analysed to assess the impact of groundwater variability on ground deformation study region. The amplitudes seasonal vertical deformation phase...
Microelectromechanical systems (MEMS) are a technology that allows engineers to create small, integrated devices with electrical and mechanical components to perform tasks carried out by macroscopic systems. MEMS devices are interfaces of the digital world (computer) and the analog world (our surroundings) with the capability of sensing and control...
Nowadays, internet is considered a basic need to humankind, whose usage has penetrated in almost all part and parcel of life. It is possible due to the successful implementation of systems using Internet of things (IoT). IoT signifies an interconnected system using smart devices and sensors, which are capable of communicating with each other throug...
Decarbonisation of the supply chain necessitates the control of carbon emissions along with the minimisation of cost. This is quite challenging in a multi-echelon supply chain involving multiple suppliers, multiple products, multiple time periods and multimodal transportation. This research deals with the design of a decarbonised supply chain netwo...
Most of the power electronic converters based on the devices such as Silicon Controlled 6 Rectifiers (SCRs) have been broadly utilized in home, business, and modern use in recent years. 7 Despite their many benefits, these power electronic converters have major issues such as pulling 8 harmonic current and the reactive part of the current from the...
Background: Sustainable crop production in the vast populated countries such as India has always been challenging problem since ancient times. The mismanagement of crops has led to reduced yields. It is of utmost important to study the Soil conditions and predict the suitable crop for cultivation under such conditions. Methods: In the present inves...
The information about the ongoing tectonic faulting process causing earthquakes in an area having single or sparse seismological waveform data available remains a mystery for seismologists. The usual P-wave polarity inversion is unable to find the solution to the earthquake mechanism if the event is recorded with a lower azimuthal coverage network....
The ever-growing energy demand for human needs has resulted in an increasing use trend of renewable energies. The use of renewable energies, particularly solar, wind etc., must be optimized with reduced effects on environmental and living creatures. For the last two decades, research has been tremendously conducted to replace all the conventional s...
The ever-growing energy demand for human needs has resulted in an increasing use trend of renewable energies. The use of renewable energies, particularly solar, wind etc., must be optimized with reduced effects on environmental and living creatures. For the last two decades, research has been tremendously conducted to replace all the conventional s...
The electrical energy generated from solar energy photovoltaic (PV) technology is intermittent, varying, and irregular. With PV technology's limited energy conversion efficiency, it is imperative to extract the maximum of converted energy. The zero slopes of the power versus voltage curve are utilized to determine the maximum power point. Conventio...
The effect of variation of mass flow rate and number of collectors (N) on the yearly efficiency of a single slope solar still by incorporating series connected N similar photovoltaic thermal flat plate collectors (NPVTFPCSS) has been investigated, keeping a constant water depth in basin as 0.14 m. The various parameters have been calculated, taking...
The performance of a wind energy conversion system (WECS) under employing a permanent magnet synchronous generator (PMSG) is investigated in this article under MATLAB/Simulink software environment. An intelligent approach for performance investigation of direct-drive generator-based system for conversion of wind energy under variable speed operatio...
The world receives more than 200 thousand people in a day and it is expected that the total world population will reach 9.6 billion by the year 2050. This will result in extra food demand, which can only be met from enhanced crop yield. Therefore, modernization of the agricultural sector becomes the need of the hour. There are many constraints that...
This work investigates solar still of double slope type included with N similar CPC integrated ETC having series connection for sensitivity analysis using one at a time method by incorporating yield and efficiency. The energy-based analysis has been done by feeding all expressions of different parameters to computer code written in MATLAB – 2015a f...
Integrated Renewable Resources: Storage operation and Management in Smart Grid
An “Element of Power System” has been written as a core course for Electrical engineering (EE)/ Electrical & Electronics Engineering (EEE) Departments of students of Dr. A. P. J. Abdul Kalam Technical University (AKTU), Lucknow. New Full Syllabus compatibility, easy to understand language which is presented in this text book will be very useful to...
__In typical distribution systems the growing of non-linear loads results in deterioration of the quality of voltage waveforms at the point of common coupling (PCC). With improvements in semiconductor technology and control circuit, active power filters are becoming viable alternative to passive filters. This paper presents different types of three...
This paper provides a novel approach of controlling the input voltage to a DVR. It is based on the difference off approximation of the line voltage and the reference voltage.The gating signals to the DC-AC inverter on the output side of the DVR are controlled by the first level details of the line.This controll scheme can assure proper and effectiv...
This paper presents a Z-source inverter which has been proposed as an alternative power conversion concept for adjustable speed AC drives. It is having both voltage buck and boost capabilities as they allow inverters to be operated in the shoot through state. It utilizes an exclusive Z-source network (LC component) to DC-link in between main invert...
This paper presents a technique for single phase power factor correction of non-linear loads employing of LabVIEW Based PID controllers used in active power filters, applied to improve power quality in electrical systems. These active filters can be able to compensate for the following current or voltage related problems: stability, short blackouts...
This paper presents the required harmonic power and rating issues of the active filter and power components. A design procedure is presented to select the dc bus capacitor that covers all modes of operation. The effect of the dc bus ripple on the compensation capacity is analyzed. A typical problem is included to illustrate the design approach foll...
The widespread use of power electronics in all types of industrial, commercial and even residential electrical equipment is causing the deterioration of the quality of the electric supply through distortion of the supply voltage. This has led to the development of more stringent requirements regarding harmonic current generation, as are found in st...
This paper presents the required harmonic power and rating issues of the active filter and power components. A design procedure is presented to select the dc bus capacitor that covers all modes of operation. The effect of the dc bus ripple on the compensation capacity is analyzed. A typical problem is included to illustrate the design approach foll...
The direct torque control theory has achieved great success in the control of permanent magnet synchronous motor. A Direct Torque Control (DTC) scheme of Permanent Magnet Synchronous Motor (PMSM) is presented. Based on in-depth analysis of PMSM mathematical model in abc frame and frame are established and the operation principle of DTC-SVPWM system...
This paper presents the design and analysis of separate zigzag transformer based 30-pulse ac-dc converter feeding vector controlled induction motor drive. The proposed ac-dc converter is based on a star-delta connected zigzag transformer, design to provide 15 phase shifted ac voltages resulting in harmonic reduction. The proposed 30-pulse ac-dc con...
In recent years, many power electronic converter utilizing switching devices like SCRs have been widely used in domestic, commercial and Industrial applications. Despite numerous advantages, these power electronic systems suffer from serious problem like drawing harmonic current and reactive component of the current from source and offer highly non...
This paper presents performance comparisons of different modulation techniques for Induction motor fed by cascaded Neutral-Point-Clamped Inverter (NPC). This paper provides a simple way to implement sinusoidal pulse-width modulation (PWM) and space vector pulse-width modulation (SVPWM) for cascaded Neutral-Point-Clamped Inverter (NPC). The output v...
This paper presents exhaustive review of various
performance parameters of an 3-phase Induction Motors such
as regulations, and, efficiency by using vector control methods.
Also this paper presents the current status of vector control
methods applied for the speed of control an 3-phase Induction
motors. Authors strongly believe that this survey art...
in this paper presents a literature survey on
improvement of power factor and reduction of harmonics
in three phase induction motor by Pulse Width
Modulation (PWM) techniques. Also presents the current
status of the improvement of power factor and reduction
of harmonics in three phase induction motor by PWM
techniques. Authors strongly believe that...
The direct torque control space vector pulse width modulation (DTC-SVPWM) theory has achieved great success in the speed control of PMSM drives. A DTC-SVPWM technique of PMSM has been presented in this paper. Based on in-depth analysis of PMSM mathematical model in a-b-c frame and α β − frame are established and the operation principle of DTC-SVPWM...
A major drawback in case of three-level PWM rectifiers is unbalance in DC-bus capacitor voltage which is further aggravated under unbalanced load conditions. The DC-bus capacitor voltage unbalancing is created due to irregular charging and discharging of the capacitor which is originated by asymmetric connections produced by power semiconductor dev...
This paper presents a literature survey on adjustable-speed drives (ASD) systems which are based on the different types of inverter topologies (namely voltage source inverter and current source inverter fed ASD system). It can overcome limitations of previous speed drive systems. The proposed inverters and ASD system can operate at wide range load...
In recent years, many power electronic converter utilizing switching devices like SCRs have been widely used in domestic, commercial and Industrial applications. Despite numerous advantages, these power electronic systems suffer from serious problem like drawing harmonic current and reactive component of the current from source and offer highly non...
Power electronics based devices are a major key component of today s modern power processing. Last few years, power quality issue is gaining concern with the evolution of power filter technology. At the transmission as well as distribution level, there is a surge in need to control reactive power and maintain stability of system. Various researcher...
This paper introduces the comprehensive as well as comparative study on different methods is used for MPPT techniques for photo-voltaic systems. The photovoltaic (PV) module efficiency conversion is affected by various variables used in it and environmental changes. Various algorithms have been implemented by taking these variables and design an MP...
This paper has been attempted to presents the investigation of transient performance of Voltage Source Inverter (VSI)-fed Induction Motor (IM) drives with Space Vector Pulse with Modulation (SVPWM) technique based on Proportional (P), Proportional Integral (PI), and Proportional Integral Derivative (PID) controllers. In general, the principle of op...
A smart Grid uses two way digital communications with advanced sensors to collect and analyze data for transforming the existing electric grid into intelligent, dynamic self-healing, self optimizing transmission and distribution grid. Because critical grid events often require real-time recognition and real time response. A smart grid uses IP-based...
This the predicted continuing rise in CO 2 emissions from road transport, it has been decided that action is required to reduce emissions from this sector. A measure that is of potential interest is increasing the use of hybrid electric vehicles (HEVs) and/ or battery electric vehicles (BEVs). These options have the advantage of reducing average ve...
Multilevel inverters have been attracting in favor of academia as well as industry in the recent decade for high-power and medium-voltage energy control. In addition, they can synthesize switched waveforms with lower levels of harmonic distortion than an equivalently rated two-level converter. The multilevel concept is used to decrease the harmonic...
This paper presents a literature survey on the stand alone power generation using three phase asynchronous generator. Induction generators are increasingly being used in non-conventional energy systems such as wind, micro/mini hydro, etc. The advantages of using an induction generator instead of a synchronous generator are well known. Some of them...
The rotor position is necessary to achieve the vector control drive system of Permanent Magnet Synchronous Motor (PMSM). In this thesis, the resolver sensor detecting the rotor position of PMSM is focused. PMSM has been widely used in high performance drive applications for its advantages such as compactness, high efficiency, reliability, and suita...
This paper has been attempt to presents the investigation of transient performance of Voltage Source Inverter (VSI)-fed induction motor drives using vector and volts/Hz control techniques. In general, the principle of operating a three phase induction motor indicates that the speed of the motor is directly related to the frequency of the supply. Th...
This paper presents the required harmonic power and rating issues of the active filter and power components. A design procedure is presented to select the dc bus capacitor that covers all modes of operation. The effect of the dc bus ripple on the compensation capacity is analyzed. A typical problem is included to illustrate the design approach foll...
This paper describes advances in power quality monitoring equipment and software tools for analyzing power quality measurement. Power quality monitoring has advanced from strictly problem solving to ongoing monitoring of system performance. The increased amount of data being collected requires more advanced analysis tools. Types of power quality va...
In this paper presents control method for hybrid active filter using space vector pulse width modulation (SVPWM). In the proposed control method, the Active Power Filter (APF) reference voltage vector is generated instead of the reference current, and the desired APF output voltage is generated by SVPWM. A MATLAB code is developed to generate the S...
Voltage sags are short duration reductions in rms voltage caused by short circuits, overloads and starting of large motors. Voltage sag is much more of a global problem. For proper analysis and mitigation of voltage sag, their characterization is important. The magnitude and durations are main characteristics of voltage sag. In this paper voltage s...
Internet of things (IoT) is associated with a system of interconnected electronic devices through the internet due to which users and machines can interact which each other. Interactions include the exchange of real-time data (from devices to consumers) and commands (from consumers to devices). This paper presents IoT based smart garden which can b...
Fuel Cell (FC) is one of the most promising alternative sources of energy as it is pollution free and gives better power density than other renewable sources. As it does not depend on the weather conditions it is very useful source of energy. In this paper, performance of evaluation of different controllers used in mathematical expression and model...
Fuel Cell (FC) is one of the most promising alternative sources of energy as it is pollution free and gives better power density than other renewable sources. As it does not depend on the weather conditions, it is very useful source of energy. In this paper, mathematical model of 500W BCS Stack is developed with some important characteristics. Powe...
This article presents the design of optimal control law and suboptimal control law for a MIMO dynamic system. The aim of comparison of two method is to find the deviation in different performance parameter of dynamic system in case of sub optimal controller design. System dynamic performance has been investigated for Balanced Model Truncation metho...
This paper displays a methodology for the ideal assignment of circulated age (DG) units in electrical vitality dispersion systems targeting Improving the framework dependability. That is, the approach depends on the hereditary calculation streamlining method for the basic leadership on vital purposes of the dispersion organize for the allotment of...
This paper presents different type of multilevel inverters along with their advantages and disadvantages. Moreover, there is an introduction of new multilevel inverter strategy named as series parallel switched DC linked multilevel inverter. This paper also describes a comparison among all multilevel inverter along with their applications.
In this paper a hybrid intelligent methodology is presented for short term electricity price forecasting in a competitive deregulated market. This approach is based on a hybrid methodology which is following several algorithm of artificial neural network. In this artificial network two most common techniques are used for forecasting the price and m...
This paper represents the modeling parameters of the Permanent Magnet Brushless DC (PMBLDC) motor drive using Mat-lab / Simulink Software. The modelling of Permanent Magnet Brushless DC (PMBLDC) motor drive is useful in various phenomenon"s such as aerospace modelling and more other applications. In this Paper, the modelling of PMBLDC motor drive i...
Voltage sags are short duration reductions in rms voltage caused by short circuits, overloads and starting of large motors. Voltage sag is much more of a global problem. For proper analysis and mitigation of voltage sag, their characterization is important. The magnitude and durations are main characteristics of voltage sag. In this paper voltage s...
In the power system, nonlinear loads results in production of harmonics due to which load current waveform gets distorted. The power-quality problems which these compensator address include voltage sags/swells, load voltage harmonic distortions, and unbalancing. There are different types of custom power devices like Distribution Static Compensator...
A smart Grid uses two way digital communications with advanced sensors to collect and analyze data for transforming the existing electric grid into intelligent, dynamic self-healing, self optimizing transmission and distribution grid. Because critical grid events often require real-time recognition and real time response. A smart grid uses IP-based...