• Home
  • Srinivasan Suresh Kumar
Srinivasan Suresh Kumar

Srinivasan Suresh Kumar
PANIMALAR POLYTECHNIC COLLEGE

panimalar polytechnic college

About

67
Publications
11,025
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
583
Citations

Publications

Publications (67)
Article
Full-text available
Gear is a reliable part of power transmission. This article presents a metallurgical failure analysis of a failed gear used in automobile engine coolant pumps. In gear, the soft microstructure of pearlite and ferrite is witnessed in metallographic analysis. Significant wear is perceived in gear teeth, and significant deformation is observed in the...
Article
Full-text available
This paper discusses the wear and friction with the 2 W% Al2O3 nanocomposite content of pure Mg and AZ91D Mg alloys. Sliding speeds of 0.5 and 1.5 m/s in cast materials with normal stress conditions have been used in sliding distances up to 2000 m/s (0.5, 1.0, and 1 MPa). In order to evaluate the work hardness of the materials measured on temperatu...
Article
In modern engineering low-density composites plays a vital role of which magnesium alloys are very effective due to its high strength with better corrosion resistance and neat cast ability. In this work a micron sized Boron carbide ceramic (B 4 C) of about 100 microns is diffused as a reinforcement with AZ91 for preparing a magnesium metal matrix c...
Article
Magnesium, a light weight alloy used in multiple engineering industrial applications because of its good Physical, Chemical and Thermal characteristics. Magnesium composites play an important role in partial or entire replacement of numerous alloys.This current work deals with Nano silicon carbide of about 100nm was incorporated with AZ91magnesium...
Article
The current work is to predict the Circularity and Cylindricity dependent on the machining parameters of CNC turning. The experimental work comprises of machining of O1 steel material utilizing CNC. The analysis will be completed by fluctuating the machining parameters. The prediction is done using 3-10-2 network by utilizing backpropagation Artifi...
Article
Natural fibers are prime focus as a potential alternate material instead of synthetic fiber to making the composite material for automobile applications. In this work, kenaf fiber was selected as reinforcement material, granite powder act as a filler material and the epoxy polymer used as matrix material to fabricate the composite laminates by hand...
Article
The structural features of the by-products from chicken poultry encourage their better use over dumping or incineration, and polymer composite materials constitute a zone for direct use in small treatment amounts. The polymer composites have been prepared, and their thermal stability tested with chicken feather fibres in open fibrous shell paws and...
Article
Enhancements to the material properties in various areas are envisaged for dispersion of nano-sized Tungsten Carbide WC oriented filler in epoxy resin of this size. Mechanical properties such as increased fracture toughness and flame resistant properties are of particular relevance. Ultimately, researchers want to know if an epoxy matrix modified w...
Article
Full-text available
Aluminium honeycomb sandwich panels have greater applications for constructions and Hexagonal aluminium design of satellites, missiles, aircraft, ships and also automobiles. To prevent failure of an important structure that subjected to stress, the aluminium honeycomb sandwich panels with face sheets act as protective mechanism. It is important to...
Article
Full-text available
The objective of this work is to find the influence of fiber content, stacking pattern, and their sequence on the mechanical properties of hybrid composites. Hybrid composites in four varieties with five laminae containing different stacking sequences of jute/madar/glass fibers were fabricated using hand-layup technique with glass fiber woven mats...
Article
Composite material is one of the necessities in this time for reduction of weight and material cost. We replace the material by the composite materials, its moves products in less cost and less weight. In this paper, the polymer hybrid reinforced composite material made by the hand layup method and vibration analysis is made on that. Here E glass f...
Article
Full-text available
In this developed environment, most of the machineries and automobile parts are manufactured by using CNC machines. The working process for these requirements is common facing, turning, milling and so on. Of these surface roughness plays an important role. Since the strength and stability of the materials depends on the operation in which it underg...
Article
This review paper proposes different methods by which we can recycle the thermoplastic waste in a desirable manner. There are several different ways to recycle the plastics to achieve different outputs like producing energy, using in chemical reactions, producing solid objects, etc. They all have certain advantages and disadvantages and by reviewin...
Article
Full-text available
In this research paper, deals with the fabrication of AA7050 alloy composites (AACs) which have been manufactured through stir casting process consuming tungsten carbide as reinforcement material. The Impact of tungsten carbide (WC) on the ultimate tensile strength (UTS) and hardness of the AACs were assessed. The generated AACs and AA7050 alloy we...
Article
Full-text available
In the recent years, the wide attention on consuming the aluminium alloy composites (AACs) has heightened owed to its potential for substituting the old-style materials in numerous industrial fields. In this review manuscript, a state of the art overview on miscellaneous particle likes graphite (Gr) powder included AACs. This review article unveils...
Article
Full-text available
Optimization of the tribological properties of composites (AA7150/10 wt% WC) manufactured via melt stirring casting route utilizing Taguchi's S/N analysis was assessed. Taguchi's approach was employed and L9 orthogonal array was elected for performing the wear tests. The optimum process parameters are determined to minimize the wear characteristics...
Chapter
In this manuscript, it exhibits the fabrication of AA7150 aluminium alloy composites (AMC) which have been produced via stir casting route utilizing zirconium oxide (ZrO 2) as secondary content. The influence of secondary phase on the tensile strength and hardness of the composites was evaluated. The produced AMC and primary alloy were portrayed vi...
Article
In the present investigation, AA7075 alloy matrix composites reinforced with different weight fraction of fly ash particulate reinforcement were manufactured through stir casting process. Tensile strength and hardness of the composites and the AA7075 matrix alloy have been analyzed. Microstructural characterization of unreinforced base matrix alloy...
Article
Full-text available
The objective of this present research study is to evaluate the mechanical characterization of composite materials were synthesized by a stir casting technique. AA6082 is chosen as matrix material and egg shell ash (ESA) particles as reinforcement. The base alloy and proposed composite specimens were subjected to hardness, tensile and wear test. Me...
Patent
Full-text available
The novelty resides in the Shape and Configuration of the “PORTABLE AND SLIP PROOF WATER CONTAINER” as illustrated. No claim is made by virtue of this registration in respect of any mechanical or other action of any mechanism whatever or in respect of any mode or principle of construction of the Article. No claim is made by virtue of this registrat...
Article
This study scrutinize the effect on the appliance of microwave heating (MH) on transesterification of palm oil and analyze its outcome on engine performance. Biodiesel is formed by two routes, that is straight and MH assist transesterification. Both the route require similar amount of palm oil), Methanol, and KOH. Biodiesel primed by straight pract...
Patent
Full-text available
The smart and digitalized knob for a gas stove along with a device to check the efficacy and safety of the LPG cylinder is essential for saving the non renewable energ The invention aims at designing a smart knob to set the temperature of each and every knob individually that is present on the gas stove. The user can set the tempe burner using the...
Article
In the last few decades, the interest of using the metal matrix composites (MMCs) has enhanced owing to its potential for replacing the traditional materials in several industrial applications. In this articles, a state of the art review on Zirconium Di-boride (ZrB2) particles reinforcement aluminium matrix composites. This review paper exhibits th...
Article
Full-text available
The automotive and transportation commercehas exposedenhanced attentionin the substituteof steel shaft throughcomposite shaft owing towardsuperior strength and light weight. Shaftsarenot restrictedto automobilesand can be employedin many areas. Generally, shafts are fabricatedeither bysolid tubes andhollow tubeof materials. Propeller shafts are a v...
Article
Full-text available
In this present study, the emissions characteristics of four stroke, single-cylinder, water-cooled, diesel-engine fueled with different blends of pongamia biodiesel i.e. PBD100, PPBD100Mgo1000 (100 ppm nano-additive dispersed in PBD100) and PPBD100Mgo200 (200 ppm nano-additive dispersed in PBD100) at 1800rpm for compression ratio 17.5:1 were invest...
Article
Full-text available
: The major problems faced by the farmers are excess water stagnation in the field during rainy seasons and grazing of agricultural land by animals and birds. Extreme cases of flooding cause crops to submerge in water resulting in devastating losses and over grazing of the agricultural land by the animals and birds destroys the crops and nutrients....
Article
Full-text available
Metal matrix composites (MMCs) have been an active area of research and scientific investigation for past few years, but only in recent times, MMCs have become realistic engineering materials. In the present study, physical and tribological performance of graphite and alumina particulates reinforced AA6351 matrix composites were examined experiment...
Chapter
Full-text available
Aluminum matrix composites (AMCs) show the attractive physical and mechanical properties like excellent strength, superior specific modulus and good wear resistance In the current work studies the impact of stirring time, stirring rev per minute and wt% of micron-sized particles on hardness behavior of Al alloy reinforced with silicon carbide which...
Article
Full-text available
The aim of this study is to show the feasibility for butt joining dissimilar brass to austenitic stainless steel plates by Friction Stir Welding. In this study, the limited FSW parameters were employed. Metallurgical characterization like Scanning Electron Microscopy and Mechanical characterization like tensile test, Micro hardness is done to inves...
Article
Full-text available
During this generation many projects and inventions are invented to reduce the man power, time, and difficulties of the work. But still some small types of works are only based on the man power because of the cost price of invention and difficult of handling of inventions. This designed and fabricated hydraulic bar bending equipment is used for ben...
Article
Aluminium alloy AA 6063-T6 reinforced with different volume fraction (5, 8 and 11 wt. %) of Al3Ti particles were fabricated by the in-situ reaction of an inorganic salt K2TiF6 with molten aluminium. The FSP was carried out to achieve property enhancement of the fabricated AMC's by the in-situ process. A one pass and two pass Friction Stir Processin...
Article
Full-text available
In the current investigation, deals with the fabrication of AA7075 alloy based aluminum matrix composites which have been prepared through stir casting process using fly ash as reinforcement materials. The impact of reinforcement content on the compression strength, yield strength, tensile strength and hardness of the composites were assessed. The...
Article
In the current scenario, hard ceramic particles reinforced aluminum matrix composites have a massive number of applications in aircraft, automobile, structural, non-structural, marine and transportation applications like the drive shaft, connecting rod and brake drum. The foremost objective of this investigation is for assessing the mechanical and...
Article
The lineage of applied materials science is always in demand for light weight and highly performing materials. Such materials would find their applications in aircraft, structural, non-structural and automobile industries, etc. The present research study focuses on the production of aluminium (AA6351) matrix composites reinforced in different mass...
Article
The lineage of applied materials science is always in demand for light weight and highly performing materials. Such materials would find their applications in aerospace, structural, transportation and marine industries, etc. The present work focuses on the influence of silicon carbide (SiC) particles addition on the properties of AA6351 aluminum ma...
Article
The fair of our work is to define the consequence of different tool rotational speedson friction stir welding AA 7075 -T651 all through the welding process. Six joints were ended using six variedtool rotational speeds of 500 rpm, 700 rpm, 900 rpm, 1100 rpm, 1300 rpm and 1500 rpm without fluctuating the table transverse speed of 50 mm/min and axial...
Article
Full-text available
Austenitic stainless steels are extensively used in numerous industries. Voluminous complications are testified during the machining of these steels. To remove these complications, optimization approaches plays a vibrant role for upgrading the eminence in product and for finding best cutting conditions. Moreover, awareness in enactment of coolant i...
Article
In the present investigation, AA7075 alloy matrix composites reinforced with different weight fraction of fly ash particulate reinforcement were manufactured through stir casting process. Tensile strength and hardness of the composites and the AA7075 matrix alloy have been analyzed. Microstructural characterization of unreinforced base matrix alloy...
Conference Paper
In the current scenario, hard ceramic particles reinforced aluminum matrix composites have a massive number of applications in aircraft, automobile, structural, non-structural, marine and transportation applications like the drive shaft, connecting rod and brake drum. The foremost objective of this investigation is for assessing the mechanical and...
Conference Paper
The lineage of applied materials science is always in demand for light weight and highly performing materials. Such materials would find their applications in aerospace, structural, transportation and marine industries, etc. The present work focuses on the influence of silicon carbide (SiC) particles addition on the properties of AA6351 aluminum ma...
Conference Paper
The lineage of applied materials science is always in demand for light weight and highly performing materials. Such materials would find their applications in aircraft, structural, non-structural and automobile industries, etc. The present research study focuses on the production of aluminium (AA6351) matrix composites reinforced in different mass...
Article
Full-text available
This paper is about analyzing optimum value of parameter in electrical eroding machining of Inconel 800 with electrolytic copper and silver coated Electrolytic copper as a tool for improving the machining process. The experiments were performed with variable input conditions and the response of material rate is measured for individual experimental...
Article
Full-text available
Polymers synthesized with synthetic fibers are more advantageous as Compared to conventional construction materials. In spite of the widespread use there is a tendency to decline because of its costs and environmental impacts. On the other hand natural fibers are less costly, light weight, and easily recyclable. Among multiple fibers bamboo is one...
Article
Full-text available
In the present work AA1100/ Al3Ni MMC was successfully fabricated using the in-situ method of stirring and squeeze casting. The effects of amount of Ni powder on the formation and mechanical behavior of Al-Al3Ni MMC were investigated. The fabricated MMC was characterized using XRD and optical microscope. The XRD patterns clearly indicated the prese...
Article
Full-text available
The present work is mainly carried out to study the distribution of temperature in friction stir welded plate of Aluminium alloy. A 3-D finite element simulation model was developed to predict temperature distribution and residual stress in Friction Stir Welding (FSW) of Al 7075 alloy. The effect of angular velocity of tool, axial load and welding...
Article
Full-text available
Aluminum alloys exhibit poor weldability by conventional fusion welding process. The heat treatable aluminum alloy AA2014 is extensively used in the aircraft industry because it has good ductility and high strength to weight ratio. In this paper the effects of welding parameters and tool profile on the mechanical properties of friction stir welded...
Article
Full-text available
The Electric Discharge Machining (EDM) is one of the most widely used new techniques to machining. In this work the literature available for improving the performance measures of EDM by using suspended powders in a dielectric medium. The Powder Mixed EDM (PMEDM) is improving the material removal rate, reducing the tool wear rate and improving the s...
Article
Friction stir processing has advanced as an innovative technique to engineer surface composites. For performing the FSP a groove was primed initially on an 8 mm thick AA6063 plates and filled with Nano silicon carbide particles for engineering the surface composites. Two altered profiled tools namely Cylindrical and Square shapes were used for surf...
Article
Full-text available
High Carbon High Chromium Steel is the most popular material in forming and blanking tool and die for the mechanical, automobile and structural engineering industry. It posses excellent harden ability, wear resistance and hot hardness to withstand the cyclic and compressive stress imposed on the punch and die during sheet metal operations. The form...
Article
Full-text available
Glass Fiber reinforced composites are emerging as a potential material for a wide variety of industrial applications owing to their good combination of physic al and mechanical properties. In recent decades, glass fiber composites parts are widely used as sliding components in different engineering applications. Due to the legitimate theoretical...
Article
Weld hardfacing is mainly employed for improving wear, corrosion and heat resistant properties under high pressure and high temperature condition. The service life of the hardfaced component is increased by achieving the desired surface hardness which is identification to get the abrasive wear resistance. The macrohardness is generally influenced b...

Network

Cited By