About
75
Publications
40,991
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
172
Citations
Introduction
Skills and Expertise
Current institution
Additional affiliations
November 2013 - December 2018
Publications
Publications (75)
The first question that generally comes to mind about the curvature parameter is whether this parameter is suitable for the study area. This question uses every parameter to be asked, but some effects that are implemented incorrectly, such as curvilinearity, raise question marks. As a result of technical errors and conceptual confusion regarding th...
In this study, a total of 50 occupational safety undergraduate students, 33 male and 17 female, and approximately 50 occupational safety experts, 10 women, were interviewed and their views on the profession were evaluated. In ISARC INTERNATIONAL SCIENCE AND ART RESEARCH 398 SCIENTIFIC RESEARCH AND INNOVATION CONGRESS 09-10 SEPTEMBER, 2023 the inter...
It that choosing the right parameters for the study area is a compeller process. Parameters provides different results in different areas, and some of these parameters can be evaluated generally, while others reflect the characteristics properties of the areas. A comprehensive literature study was conducted first for this purpose. An examination of...
This study aims to determine the properties of consolidation on different sand samples. The four sands were Type 1, Type 5, Type 9, And Type 13. Sand samples show that Type 1 sand comprises augite, hedenbergite, and Anorthite; Type 5 consist of Quartz, Anorthite, Muscovite; Type 9 consists of Quartz, Anorthite; and Type 13 is composed of quartz, an...
The preparation of landslide susceptibility maps is a complex process with regards to selection of study field, parameters, and methods. The phase after the determination of the landslide distribution in landslide susceptibility studies is selection of methods and parameters to be used. A review of approximately 1500 randomly selected publications...
Aspect is one of the parameters used in the preparation of landslide susceptibility maps. The procedure of this easily accessible and conclusive parameter is still a matter of debate in the literature. Each landslide area has its own morphological structure, so it is not possible to make a generalization for the aspect. In other words, there is no...
İş Güvenliği Uzmanlığına ilgi, dünyada olduğu gibi ülkemizde
de son yıllarda giderek artmaktadır. Bunun temel nedenleri arasında
istihdamın diğer bölüm mezunlarına oranla daha fazla olması
ve yükselme imkânı sağlamasıdır. Aşamalı ve temelinde eğitime
dayalı süreçlerden oluşan Uzmanlık sınıfları, özellikle birçok kişinin
ilgisini çekmektedir. Konuyl...
The preparation of landslide susceptibility maps is a complex process with regards to the selection of the study field, parameters, and methods. The phase after the determination of the landslide distribution in landslide susceptibility studies is the selection of the methods and parameters to be used. However, first, as in this study, a comprehens...
This study aimed to compare grain size distribution and grain shape of sands with different mineralogies and origins. Also, we attempted to investigate the changes in the physical properties of sands with different mineralogical properties. Four different sand samples taken from the Black Sea and Aegean regions were selected for experiments. Sands...
The history of landslide susceptibility maps goes back about 50 years. Danger and risk maps later followed these
maps. Inventory maps provide the source of all these. There are different parameters selected specially for each
field in the literature as well as parameters selected because they are easy to produce and obtain data. One of the
paramete...
Clean sands taken from the Trabzon, Sinop, Zonguldak and Çine regions of Turkey were used in this study. They were named, in order, Type 1, Type 5, Type 9, and Type 13. The samples were obtained by washing four sands through a no. 200 sieve. Type 1 is composed of 53% augite, and its specific gravity is 3.44. Type 5 is composed of 57% SiO2, and its...
Keywords Abstract Quartz sand, Griding, Void ratio, Angle of internal friction, Cohesion. Griding sand is specifically used to treat clays that tend to swell. Each of the sands has its unique physical properties. For that reason, it is necessary to determine the engineering properties of the sand used. In this study, four types of sand with differe...
For many years, biggest problem in the preparation of landslide susceptibility maps has been experienced in the selection of parameters. Each parameter gives different results in different fields. Some of these parameters can be generally evaluated while others reflect the characteristics of the areas. In this study, the effect of linear parameters...
For many years, the biggest problem in the preparation of landslide susceptibility maps has been experienced in the selection of parameters. Each parameter gives different results in different fields. Some of these parameters can be generally evaluated while others reflect the characteristics of the areas. In this study, the effect of distance from...
For many years, the problem in the preparation of landslide susceptibility maps has been experienced in the selection of parameters. Each parameter gives different results in different fields. Some of these parameters can be generally evaluated while others reflect the characteristics of the areas. In this study, 65 pieces of landslide were chosen...
For many years, the problem in the preparation of landslide susceptibility maps has been experienced in the selection of parameters. Each parameter gives different results in different fields. Some of these parameters can be generally evaluated while others reflect the characteristics of the areas. In this study, 10 landslide maps were chosen to ev...
For many years, the biggest problem in the preparation of landslide susceptibility maps has been experienced in the selection of parameters. Each parameter gives different results in different fields. Some of these parameters can be generally evaluated while others reflect the characteristics of the areas. In this study, the effect of linear distan...
Heyelan duyarlılık haritalarının üretilmesinde, pratik olarak hazırlanmasından dolayı tercih
edilen parametrelerden biri de yüksekliktir. Çalışmalarda kullanılan yükseklik, “topografik
yükseklik” ve“göreceli yükseklik” şeklinde değerlendirilmektedir. Literatürde, araştırmacılar,
çoğunlukla topoğrafik yüksekliği çalışmalarında kullanmayı tercih etmi...
Heyelan oluşumuna neden olan parametrelerden biri de yamaç eğimidir. Ayrıca, heyelan
duyarlılık haritalarının hazırlanmasında da çok sık tercih edilmektedir. Araştırmacıların en çok
görüşbirliği yaptığı parametrelerdendir. Bu amaçla, 1967-2017 yılları arasında hazırlanan
1500’e yakın çalışma incelenmiştir. Bu çalışmaların yaklaşık 1000 tanesinde eğ...
Clean sands taken from the Trabzon,Sinop, Zonguldak and C¸ ine regions of Turkey wereused in this study. They were named, in order, Type 1,Type 5, Type 9, and Type 13. The samples wereobtained by washing four sands through a no. 200sieve. Type 1 is composed of 53% augite, and itsspecific gravity is 3.44. Type 5 is composed of 57%SiO2, and its speci...
Bakı, heyelan duyarlılık haritalarının hazırlanmasında kolay üretilebilmesinden dolayı tercih
edilen fakat alınan sonuçlar bakımından çoğu araştırmacının yetersiz gördüğü bir parametredir.
Bakı gibi kolay hazırlanabilen fakat sonuçları da onun gibi araştırmacılarca yetersiz bulunan bir
diğer parametre de yamaç eğriselliğidir. Bu çalışma ile her iki...
Four different sand samples, designated Type 1, Type 5, Type 9, and Type 13, were selected for this study. The sands were subjected to milling operations of 30 (Types 6, 10, 14), 45 (Types 7, 11, 15), and 60 (Types 8, 12, 16) minutes to produce new samples. For Type 1 sand, new samples were obtained by grinding for 75 (Type 2), 90 (Type 3), and 120...
z Karadeniz Bölgesi'nde jeomorfolojiyi etkileyen en önemli olaylardan biri heyelanlardır. Çalışma alanı olarak seçilen Gerze-Sinop arası sahil kesimi farklı dönemlerde çok sayıda heyelana maruz kalmıştır. Kaya türünün cinsi ve özelliği, yamaç eğimi, yağış miktarı ve özellikle orman kesimi, temel kazısı, yol yapımı gibi doğal dengenin bozulmasına yo...
z Karadeniz sahil kesimi heyelan için çok elverişlidir. Bu çalışmada Gerze (Sinop) ilçesinde meydana gelen Deniz Feneri heyelanı incelenmiştir. Heyelan Deniz Feneri restoranın bahçesinde meydana gelmiştir. Çalışma alanın jeolojik ve zemin özellikleri belirlenmeye çalışılmıştır. Alanda Erken-Orta Eosen yaşlı Kusuri Formasyonu hakimdir. Kusuri formas...
z Türkiye de heyelanların en çok meydana geldiği bölge Karadenizdir. Heyelanlara sıkça rastlanılan yerlerden biri de Sinop ili ve çevre ilçeleridir. Çalışma alanı olarak Gerze ilçesi seçilmiştir. İlçede zemin koşulları ve iklim heyelan oluşumu için uygun koşullara sahiptir. Özellikle deniz kıyısındaki alanlarda heyelanlara sıklıkla rastlanılmaktadı...
z Çalışmada, Orta Karadeniz Bölgesinde yer alan Gerze (Sinop) ilçesi için yapılan arazi çalışmaları ile zeminin mühendislik özellikleri ortaya konmaya çalışılmıştır. Arazi çalışmaları sırasında farklı amaçlar için örnekleme yapılmıştır. Çalışma alanındaki zeminin dane dağılımını, kıvam limitlerini, özgül ağırlığını, serbest basıncı, efektif kohezyo...
z Çalışmada, Orta Karadeniz Bölgesinde yer alan Gerze (Sinop) ilçesi için yapılan arazi çalışmaları ile zeminin mühendislik özellikleri ortaya konmaya çalışılmıştır. Arazi çalışmaları sırasında farklı amaçlar için örnekleme yapılmıştır. Çalışma alanındaki zeminin dane dağılımını, kıvam limitlerini, özgül ağırlığını, serbest basıncı, efektif kohezyo...
Sands that they have different mineralogy were selected for study. Sand 1, Type 5, Type 9 and Type 13 names are given. These specimens were then subjected to different grindin procedures and three more specimens were prepared from each. Types 14, 15 and 16 sands were obtained by grinding Type 10, 11, 12 and Type 13 sand with grindin of Type 6, 7, 8...
The process steps in the preparation of landslide susceptibility maps can be evaluated in three stages. The first one is to produce the data subject to the research, the second one is to apply the produced data to the model and the last one is to obtain and evaluate the landslide susceptibility map with the data obtained from the application of the...
Ahi Evran University Bağbaşı Campus distances were calculated in this study. The graduation thesis prepared by Kuyrukcu (2012) has been taken as reference in determining the walking distances in the study area. It is seen that at the beginning of the Bağbaşı Campus, the academic subjects were gathered as a group, and the Faculty of Economics and Ad...
Ahi Evran University Bağbaşı Campus was selected as the study area. Construction work on the area continues rapidly. The university Established in 2006, Bağbaşı campus was selected as the main campus in 2008 and since that date, construction studies have continued. The only study about the campus area was prepared by Tetik in 2013. In this study, c...
There are many morphological factors that cause landslide. The most influential ones are determined by the literature survey that shows slope, elevation, curvature and aspec. The parameters alone are not effective in the formation of landslides. Co-evaluation of multiple parameters facilitates understanding of the mechanism of landslide formation....
Sands that they have different mineralogy were selected for study. Sand 1, Type 5, Type 9 and Type 13 names are given. These specimens were then subjected to different grindin procedures and three more specimens were prepared from each. Types 14, 15 and 16 sands were obtained by grinding Type 10, 11, 12 and Type 13 sand with grindin of Type 6, 7, 8...
The sand samples used in the soil mechanics tests may be randomly selected as they may be in certain
standards. In general, the specific weight of sand varies between 2.60-2.70. this value varies according to
the mineral content. For example, when the sand sample taken from the area with the sedimentation side
is valued at 2.75, the sample taken fr...
Z Heyelanlara sıkça rastlanılan yerlerden biri de Sinop ili ve çevre ilçeleridir. Çalışma alanı olarak Gerze ilçesi seçilmiştir. İlçede zemin koşulları ve iklim heyelan oluşumu için uygun koşullara sahiptir. Özellikle deniz kıyısındaki alanlarda heyelanlara sıklıkla rastlanılmaktadır. Arazi çalışmaları sırasında bölgede uçuk olarak adlandırılan ala...
z Bu çalışmada, kesme kutusu deney sonuçları kullanılarak, kumlu zeminlerde Mohr-Coulomb yenilme modeli içsel sürtünme açısı ile kayma modülünün efektif gerilme ve göreceli sıkılıkla değişim davranışı incelenmiştir. Bu amaca yönelik olarak Trabzon, Sinop, Zonguldak ve Aydın illerinden alınan farklı mineralojideki kumlar kullanılmıştır. Ayrıca seçil...
The separation of soils into two different classes as "clay" and "sand-gravel", consolidation for clays, deformation analysis based on elastic theory for sands is a method commonly used in geotechnical engineering. Sands are fragile materials. Vulnerability is one of the most important behaviors that affect the deformation and expansion of the gran...
In this study, the changes in the engineering properties of sand with different minerolagical properties were tried to be investigated. Four different sand samples were taken from the Black Sea and Aegean Regions for the experiments. These sands were named as Trabzon, Sinop, Zonguldak and Çine. The engineering and mineralogical properties of the sa...
This study aimed to examine the shear strength and stress-unit deformation behaviors of dry sands under static loads with the help of shear box experiments. For that purpose, sea sand taken from Trabzon, Sinop, and Zonguldak Provinces and river sand taken from Aydın Çine District were used. We attempted to evaluate geological and mineralogical prop...
Many experiments are carried out in field and laboratory environments to determine soil properties. Samples taken with drilling do not represent all the plates although they are disturbed. Deterioration in the samples is effect the results negatively. Ground drilling are reliable but also expensive methods. Ground propertis changing with depth in n...
This study aims to determine the engineering characteristics of Ahi Evran University (Kırşehir) Bağbaşı campus area soil and to examine it in terms of construction applications. For this purpose, geological map of the field of the study was created. Soil investigation reports of the building in the field were obtained. In order to determine the soi...
In our country, majority of the state universities are established as campus universities in last 10 years. The change in the AEU, Bağbaşı Campus, which is one of the newly established State Universities in Turkey since 2006, has been tried to be examined with visuals of different years. Within the scope of this study, the changes that occurred dur...
The study was prepared performing shear box test on 4 different sand samples which had been prepared in different frequencies. For this reason, 10 kg sand samples from Trabzon, Sinop, Zonguldak and Çine provinces were taken. Each sand sample was prepared in 7 different frequencies. 24 graphics were created after evaluating the results. Selected gra...
Technological developments, findings, and associated improvement of structural codes together with the change in the earthquake potentials and deficiencies of the old buildings necessitate the evaluation of the present building stocks. Both the Earthquake Regulations and the Seismic Zoning Map in Turkey have been going through a fast change in the...
Technological developments, findings, and associated improvement of structural codes together with the change in the earthquake potentials and deficiencies of the old buildings necessitate the evaluation of the present building stocks. Both the Earthquake Regulations and the Seismic Zoning Map in Turkey have been going through a fast change in the...
Gerze has an old settlement that built without paying attention to geological and geotechnical properties. However, some features like economic, social, culture and transportation besides engineering factors should be taken into consideration when choosing a settlement. Geological and geotechnical characteristics must be determined in the site sele...
There are three important issues in preparing the landslide susceptibility maps (i) selected scale, (ii) methods to be applied and (iii) determining the parameter represent to field. Also, the selection of the parameter class ranges are important and must be carefully examined. When the literature is examined, it is determined that the most used pa...
The Anatolian Beige Marble samples belong to Kırşehir which has a vast capacity of marbie
mines and industry are prepared to fit size for test standart. The compressive strength of these
specimens are determined at laboratory. In this study is to determine the alteration of uniaxial
compressive strength that is occured under the different loading r...
zet Zengin mermer yataklarına ve işletme endüstrisine sahip Kırşehir yöresinden alınan " Anadolu Beji " mermerine ait numuneler, laboratuvarda deney standartlarına uygun (5x5x5 cm) getirilmiş ve laboratuvarda yapılan deneyler ile basınç dayanım özellikleri tespit edilmiştir. Çalışmada farklı yükleme hızlarında mermer numunelerinin tek eksenli basın...
zet Son yıllarda, gerek hızlı yapılaşmanın getirdiği alan gereksinimi gerekse eski binaların ahşap taş ve topraktan yapılması sonucu eski döneme ait yapılar artık tek tek yok olmaktadır. Bu nedenle son dönem çalışmaları incelendiğinde eski binalar ve " Türk evi " nin gelişimi hakkında yeterli bilgiye ulaşılamamaktadır. Türk mimarisi ile ilgili deği...
Bilgisayar destekli haritalama teknolojileri ve bunların geliştirilmesinde kullanılan yöntemlerde meydana gelen gelişmeler, daha yüksek performansa sahip heyelan duyarlılık haritalarının üretilmesini sağlamıştır. Bu çalışmada, bu yöntemlerden biri olan AHP'nin (Analitik Hiyerarşi Süreci) heyelan duyarlılık haritalarının üretilmesinde kullanımına il...
Computer-aided mapping technologies and developments used in improvement of these methods have led to the production of higher performing landslide susceptibility maps. In this study, a thorough review of the literature about the production of landslide susceptibility maps by using AHP (Analytic Hierarchy Process) was made and, also, landslide susc...
Costly and time consuming testing techniques and the difficulties in providing undisturbed samples for these tests have led researchers to estimate strength parameters of soils with simple index tests. However, the paper focuses on estimation of strength parameters of soils as a function of the index properties. Analytical hierarchy process and mul...
Sinop-Gerze yörelerini kapsayan bu çalışmada, Coğrafi Bilgi Sistemleri (CBS) ve Uzaktan Algılama (UA) teknikleri ile farklı kaynaklardan toplanan veriler değerlendirilmiş, Analitik Hiyerarşi Yöntemi (AHP) kullanılarak heyelan duyarlılık haritası üretilmiştir. Üretilen duyarlılık haritalarında 5 farklı duyarlılık alanı ayırtlanmıştır.
Gerek literat...
Landslides occurring in Turkey causes loss of life and property like many countries of the world. In Turkey, especially Black sea region, landslides are investigated in scale of village, province and city. In this study, Gerze town of Sinop located in Western Black sea was chosen as study area. The study area has some sensitive regions to landslide...
