Salloom Al-Juboori

Mu’tah University · Mechanical Engineering- Engineering Faculty

Purpose Studies on this topic have shown the remarkable lubricating properties, viz. friction-reducing and anti-wear, of certain nanoparticles. This makes them potential candidates for replacing the lubrication additives currently used in automobile lubricants, especially because the latter is known to be pollutants and less efficient in some speci...

Solar energy has a drawback when it works individually, because it could not produce electrical energy in rainy and cloudy seasons, and during the night time. Wind energy is not constant and it varies from zero to storm force. This means that wind turbines do not produce the same amount of electricity all the time. Therefore, the need to overcome t...

This part is a continuation of Part-1, which was studying the effect of anti-corrosion nano-materials coating using zinc (Zn) and cobalt (Co) on corrosion resistance and its relationship with mechanical properties. While, part 2 was on studying the linear stresses resistance after coating by using the same nanomaterials of paret-1 of carbon steel p...

This part is a continuation of Part-1, which was studying the effect of anti-corrosion nano-materials coating using zinc (Zn) and cobalt (Co) on corrosion resistance and its relationship with mechanical properties. While, part 2 was on studying the linear stresses resistance after coating by using the same nanomaterials of paret-1 of carbon steel p...

Recent research has shown that the Nano coating materials play a vital role in improving performance of corrosion resistance in hostile environment and enhancing the mechanical properties and reducing the dimension changes. Due to the superior capabilities of Nano coating in many benefits which can be achieved, in addition to corrosion resistance,...

The part-2 research is a continuation of part-1 of using a simulation of Nano coating effect on linearized stresses resistance using Finite Element Analysis (FEA) software was carried out. The prime focus here was on exposing a thin Aluminum (Al7075-T6) walled spherical vessel to internal pressure before and after coating, this spherical vessel was...

The main objective of this study is to assess the application of Lean Manufacturing in the companies adopting Lean management in order to improve its effectiveness, in addition to develop a track for other companies planning to adopt Lean management. This study explored key literature resulting in the development of a new model of application. More...

The use of an advanced nanotechnology coating process is absolutely helpful in immensely optimizing the efficiency of mechanical properties of materials such as: Longer service life, ability to tolerate greater loads, ease and low cost of maintenance, the environmental gain in the conservation of resources, improved response in kinetic systems, low...

ABSTRACT Exchanges within the construction teams have been often found to be argumentative, conflict and crisis ridden, and as a result individual worker in the industry are exposed to extreme hostility. These conflicts result from disagreements about ways of solving spot site-related problems, insufficient planning, ill-prepared contract documents...

Exchanges within the construction teams have been often found to be argumentative, conflict and crisis ridden, and as a result individual worker in the industry are exposed to extreme hostility. These conflicts result from disagreements about ways of solving spot site-related problems, insufficient planning, ill-prepared contract documents, and the...

The special design process of an efficient residential house energy saving energy system is presented in this work. The main objectives are to achieve major energy cost reductions, providing safe house and reliable service. Thus, the essentials tool of the system will focus on providing useful information for the user by continuous monitoring and r...

The aim of the study was to identify the value of the thinking Style for brain dominance and the impact of its relationship in making the project management and job preference of the employees of the Arab Potash Company, which were (111) employees chosen for this study. The SPSS (version 16) was used to analyze the data, using different statistical...

The aim of the study was to identify the value of the thinking Style for brain dominance and the impact of its relationship in making the project management and job preference of the employees of the Arab Potash Company, which were (111) employees chosen for this study. The SPSS (version 16) was used to analyze the data, using different statistical...

The aim of the study was to identify the value of the thinking Style for brain dominance and the impact of its relationship in making the project management and job prefernce of the employees of the Arab Potash Company, which were (111) employees chosen for this study.The SPSS (version 16) was used to analyze the data, using different statistical m...

Up to the present time the parabolic trough power plant systems are considered the most important concentrated solar power systems which are the basic central and prime mover of the globally electricity production wheel , as they contribute to the bulk production of the world's electricity; compared to the other concentrated solar power systems. Th...

Abstract: The problem of projects delay is a fact that happens mostly in constructions industry in many countries. Delay is always measured as expensive to all parties concerned in the projects and very often it will result in clash, claims, total desertion and much difficult for the feasibility and it slows the growth of constructions sector. For...

Abstract In this work the total quality management (TQM) and Kaizen philosophies were applied on the electricity and public water sector maintenance. The methodology of collecting the data was by designing a special questionnaire containing a series of questions comparing these two philosophies for a specific period of application to study their ef...

Abstract Climate change was the beginning of the depletion of fossil fuels, and increasing expansion in investment projects in various sectors of our life, all play a key role in the increasing demand for energy. So energy is considered one of the biggest priorities and challenges facing the world economy due to the lack of conventional energy sour...

There is a high growing interest for the use of wind power utilizing the building's layout design. The main objective of this work is to accelerate the wind speed before reaching the turbines by using spatial design of twin's buildings; this will generate more electric power. The variables which are affecting the wind speed directed to turbines are...

In this work the total quality management (TQM) and Kaizen philosophies were applied on the electricity and public water sector maintenance. The methodology of collecting the data was by designing a special questionnaire containing a series of questions comparing these two philosophies for a specific period of application to study their effect on t...

Abstract: This work is aimed to apply the basic concepts of Total quality Management (TQM) on process improvement of feed mill plant and to show the practical benefits of implementation of these concepts to improve the feed quality of poultry feed manufacturing processes, which suffers from low quality feed in a poultry enterprise as a field study....

Abstract Inventory management represents an important thing for any company because it is considered as a competitive feature of the company in the market. Owning a high stocks or stock less than the limit required, represents a challenge for the companies, enterprises, and especially in light of exigent circumstances may meet. It is increasingly i...

Abstract This study implemented the concept of LCC to select between two alternative models from three different sets of medical devices, including two electrolyte models, two X-ray models and two infant incubator models as case studies. For LCC calculations, Kaufmann approach was used, which defines the operating profile, utilizing factor, the mos...

ABSTRACT Arab Potash Company (APC) is one of the largest companies in Jordan. This company is suffering from lost time injury and accidents due to a lot of different accidents and several hazards associated with complicated location of the work environment. This work discusses the main parameters representing the risk and safety measures in this co...

Abstract The aim of this work is directed toward investigating the failure of journal bearings using Acoustic Emission technology (AET). Previous work and reports done by many individual scientists have shown that bearings suffer from decrease in efficiency after period of time, and there is no reliable method for testing bearing life. Among the be...

Abstract The operational life and reliability of I-C engines are limited to certain extent by the breakdown of the engine components due to wear. It is advantageous to know the condition of an engine and its components without disassembling for detail measurements. This work describes the possibility of employing wear rate analysis of engine compon...