Sahith Reddy Madara

Sahith Reddy Madara
Institut Supérieur de l'Aéronautique et de l'Espace (ISAE) | ISAE · Department of Complex Systems Engineering (DISC)

Aerospace Engineering

About

35
Publications
35,606
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
125
Citations
Introduction
Sahith Reddy is currently associated with Sharjah Academy for Astronomy, Space Sciences and Technology - University of Sharjah as a Research Assistant, and also acting as a UAE's National Point of Contact for Space Generation Advisory Council. Prior to SAASST, Sahith was working as a Graduate Engineer at Collins Aerospace – A Part of United Technologies Corporation, Production & Quality Engineer at Hydro Middle East & Aerospace Research Engineer at Masdar Institute. Sahith has published more than 22 research & review papers at various International peer reviewed journals & conferences throughout the world. Sahith's research interest over the past few years have mainly focused on Composite Materials, Satellite Technologies, Non-Traditional Machining, Radar Absorbing Materials.
Additional affiliations
January 2019 - October 2020
University of Sharjah
Position
  • Engineer
June 2018 - January 2019
United Technologies Corporation
Position
  • Engineer
February 2018 - December 2018
Khalifa University
Position
  • Engineer
Education
September 2020 - October 2021
Institut Supérieur de l'Aéronautique et de l'Espace (ISAE)
Field of study
  • Aerospace Systems Engineering
September 2014 - September 2018
Amity University
Field of study
  • Aerospace Engineering

Publications

Publications (35)
Conference Paper
Full-text available
The near-earth asteroids (NEA) have been a notable literature topic in astrodynamics and orbital mechanics. Several potential NEAs for exploration missions are being considered in this paper based on resources mining opportunities: (i) water extraction-1996 XB27, 2001 AE2; (ii) Platinum group mining (PGM)-1998 KY26, Nereus, 1989 ML, 2002 AL31; (iii...
Conference Paper
Full-text available
This paper will look into the factors that affect the correlation between the Jupiter-Io observed radio events and the Sun radio bursts using the Sharjah Decametric Radio Telescope (SDRT) located at the Sharjah Academy for Astronomy, Space Sciences, and Technology in the United Arab Emirates. The SDRT has been operational since 2019 and is sponsore...
Conference Paper
Full-text available
This paper studies the correlation between the number of sunspots observed by the Sharjah Optical Observatory (SOO) and the solar radio bursts observed by the Sharjah Decametric Radio Telescope (SDRT) following the new 25th solar cycle. Both observatories (SOO and SDRT) are located at the Sharjah Academy for Astronomy, Space Sciences, and Technolog...
Conference Paper
Full-text available
Sharjah-Sat-1 is currently being developed as a collaborative research project among the Sharjah Academy for Astronomy, Space Sciences, and Technology (SAASST), University of Sharjah (UoS), Istanbul Technical University (ITU), and Sabanci University (SU). A 3U CubeSat design has been adopted with a dual payload onboard: (i) an improved X-ray Detect...
Conference Paper
Full-text available
SharjahSat-1 is a collaborative research project by the Sharjah Academy for Astronomy, Space Science, and Technology (SAASST), University of Sharjah (UoS), Istanbul Technical University (ITU), and Sabanci University (SU). The 3U+ CubeSat will implement an improved X-ray Detector (iXRD), as the primary payload, and a secondary payload, which is a sy...
Conference Paper
Full-text available
In recent years, nanosatellites have experienced rapid development in light of the launch of hundreds of them in Low-Earth Orbit (LEO). As part of the research investigations conducted in spacecraft operations, the Sharjah Academy for Astronomy, Space Sciences, and Technology (SAASST) is currently developing Sharjah-Sat-1. The 3U X-ray Detector Cub...
Conference Paper
Full-text available
An array consisting of four dual dipole antennas has been built at the Sharjah Academy for Astronomy, Space Sciences, and Technology (United Arab Emirates) to conduct decametric radio observations. Based on the NASA radio Jove design, the array spans an area of about 400 square meters. The receiver of the array is designed to operate at 20.1 MHz to...
Article
Full-text available
In abrasive waterjet machining (AWJM), water acts as an accelerating medium and abrasive particles are used for cutting materials. This is a cost effective and environmentally friendly technique. Kevlar 49 is one of the most commonly used composite materials and is extensively used in aerospace industries where high strength-to-weight ratio and exc...
Article
Full-text available
Present study deals with hot forging behavior of the sintered AISI 8740 powder metallurgy steels through powder metallurgy route. These steels extensively used for automobile application for its strength and elongation. Green compacts were fabricated with aspect ratios 1.28, 0.92 and 0.55. These green compacts were fabricated using appropriate die...
Article
Full-text available
Ti-6Al-4V is classified among the most commonly used Ti-alloys and is extensively used in aerospace and medical industries where low-density, high strength and outstanding corrosion resistance are required. This material cannot be processed by conventional machining methods because of its high strength. Abrasive Waterjet Machining, abbreviated as A...
Chapter
Full-text available
This paper discusses key challenges faced by transformation of smart cities and integration of green technologies, initiatives, and existing systems that are in place to solve for these challenges. With overpopulation, fast urbanization, and environmental changes, powerful administration of trees and plants is required like never before. We present...
Article
Full-text available
This study shows the vibration and low velocity impact behaviour of AlMg4.5Mn reinforced nanoclay nanocomposites at room temperature. Composite samples with different weight percentage of nanoclay were fabricated using liquid state synthesis casting technique, to achieve homogeneous dispersion of Nanoclay. The material characterization was studied...
Conference Paper
In this paper tuning a proportional–integral– derivative controller (PID or three-term controller) to improve the efficiency of the electric vehicles (EVs) in the suspension system is implemented. Initially, the mathematical modelling of the suspension system is developed. This is simulated as an open loop system to obtain the suspension effect and...
Article
Full-text available
The present study deliberates the optical properties of vacuum evaporated Pb15Se85-xGex (x = 0, 3, 6 at. %) thin films. The absence of sharp peaks in XRD hints about the non-crystalline nature. Transmission spectra (at normal incidence) are acquired in the spectral region of 400 to 2400 nm. A blue-shift in the transmission spectra hints about the i...
Article
Full-text available
Abrasive waterjet machining (AWJM) is one of the unconventional machining practices and is used widely in industries. The key output performance measures in this technique are depth of cut and surface roughness. This paper presents the experimental investigation on machining conditions of abrasive waterjet process in machining mild steel. Taguchi’s...
Article
Full-text available
Abrasive waterjet cutting is one of the unconventional methods used to cut some of the difficult to cut materials. In certain materials this method has proved to give better results compared to the conventional methods. In this model the water jet cutting is done on hastelloy using the three parameters which are abrasive mass flow rate, traverse sp...
Conference Paper
Full-text available
The SHARJAH-SAT-1 would be the first CubeSat mission to be developed by the Sharjah Academy for Astronomy, Space Sciences, and Technology (SAASST) students and researchers, with the aim of not only designing, fabricating, testing & launching the CubeSat itself, but also building the capacities and expertise for future SAASST CubeSat missions as wel...
Conference Paper
Full-text available
Abrasive waterjet (AWJ) cutting is the nontraditional cutting process which is capable of cutting variety of difficult-to-cut materials. However, this process experiences relatively greater initial investment, operating and tooling and maintenance costs. Therefore precise selection of the operating variables is very important for the commercial use...
Conference Paper
Full-text available
In recent time published research indicates only limited works have been addressed in the field of machining properties with respect to ecofriendly materials. However, characteristic natural fibers have extraordinary potential for decreasing the materials weight, bio-degradable, and bringing down material cost. The aim of the present work is to foc...
Article
Full-text available
Abrasive waterjet cutting is one of the unconventional cutting processes capable of cutting extensive range of difficult-to-cut materials. This paper assesses the impact of process parameters on surface roughness which is a significant machining performance measure in abrasive waterjet cutting of hastelloy. The experimental parameters were selected...
Article
Full-text available
Self-healing materials are artificial or synthetically created substances that have the built-in ability to automatically repair damage to themselves without any external diagnosis of the problem or human intervention. This article presents the current research and developments in self-healing composite materials. A detailed study is conducted on v...
Conference Paper
Full-text available
Millennials are the generation which did not have cell phones when they were born and they did not get phone until they were in high schools. This millennial generation has a grounding in the pre-digital world but has grown up alongside the technology. Most millennials who got raised in the digital technology era have more choices available than an...
Conference Paper
Full-text available
Abrasive Waterjet Cutting (AWJC) process is superior to many other cutting techniques in processing variety of materials and has found wide applications in manufacturing industries. There are several associated parameters in this method, among which water pressure, abrasive flow rate, jet traverse rate and standoff distance are of great importance...
Conference Paper
Full-text available
Solar powered controlled vehicle has numerous applications in the developing automobile market. This venture depicts the joined utilization of customary internal ignition motor with electric battery charge and solar based fueled enlistment engine for automotive vehicles. With the consolidated operations of three particular advancements, there comes...
Conference Paper
Full-text available
This paper gives an outline of contributions in the field of Radio Frequency Identification (RFID) innovation, and its utilization in Amity University, Dubai Campus. The multidisciplinary idea of this rising innovation requires abilities from different scheming fields. Henceforth, keeping in mind the end goal to expand productivity and adequacy, nu...
Article
Full-text available
The three dimensional spacer textures, comprise of two bi-directional woven texture surfaces, which are mechanically associated with vertical sewed heaps. The three dimensional spacer textures can be made of glass fiber, carbon fiber or basalt fiber. The Three Dimensional Composites are classified based on the different factors depending on the ori...
Conference Paper
Full-text available
Library and data science is an exceptionally wide impart, which utilizes an extensive variety of continually advancing examination systems and methods. Bureaucrats have a chance to discover better approaches to coordinate accumulations and administrations to tutee needs and institutional objectives by giving assets and programming in Science, techn...
Article
Full-text available
The increasing availability of green power enables electricity customers to accelerate installation of renewable energy technologies. This review paper provides various approaches towards power market worldwide. Impact of power generation on international trade are discussed to understand various opportunities in green power generation. Current tre...
Article
Full-text available
ADS-B (Automatic Dependent Surveillance Broadcast) is a new observation innovation technology intended to help modernize the air transportation framework. It gives foundational innovation to enhancements identified with the cutting edge Air Transportation System. Since ADS-B will wind up planning compulsory by 2020 for most airspaces, it is imperat...
Article
Full-text available
A subsonic wind tunnel is a device used to create a fast stream of air through a test area in which an object is kept. This paper will focus primarily on the fabrication process of small scale subsonic wind tunnel, flow visualization analysis on an object and calculation of lift and drag coefficient of an object through experiment. In the present w...
Article
Full-text available
Electro chemical machining is a capricious/unconventional machining process which works on the guideline of electrolysis prepare. This sort of machining is exceptionally regular in aviation material and defense industry. But due to its effectiveness it is being connected to numerous other industry where the work piece is extremely hard to machine a...
Article
Full-text available
Laser beam technology is a standout amongst the most generally utilized warm vitality based non-contact sort progress machining process which can be connected for entire scope of materials. The cost of slicing hand-to-machine materials by customary mechanical machining procedures is high because of the low material expulsion rate and short device l...
Article
Full-text available
Air Transportation in Aviation is one of the quickest developing businesses and additionally transportation modes on the planet. As the aviation sector makes a significant contribution to the global economy every year. Mainly in the todays aviation industry is focusing on the greener aviation which can reduces carbon footprints and can move towards...
Article
Full-text available
This commentary introduces a foundation of the recent development in 3-D Printing gas turbine blade with sharp edge cooling innovations alongside numerical techniques and physical models that are most normally utilized as a part of the calculations of cutting edge streams in the world of Aerospace for turbine blades technologies. De-termining the t...

Network

Cited By