Safa Subhi Ibrahim

University of Zakho | UoZ · Chemistry Department

The current study examines the numerical analysis of the laminar flow around a cylinder at various Reynolds numbers (0.1, 1.1, 20, 26, 50, 100, and 195). The research found that a steady state can exist for Reynolds number values of 0.1, 1.1, 20, and 26. However, the flow pattern becomes unstable at Reynolds numbers 50, 100, and 195, leading to the...

In an artificial environment, the most important key in the process equipment design is determining gas-liquid two-phase flow frictional pressure drop of pipes. To achieve this, an experimental investigation was carried out in this study to analyze the pressure drops of air-water two-phase flow in a 30mm internal diameter horizontal pipe with a len...

In the present study, the effects of different oblique angles and diameters on the cylindrical weir and below a gate as a combined device have been studied experimentally. For this purpose, sixteen models of combined cylindrical weir-gate structures have been tested in a laboratory flume. These models had four different oblique angles α (30 0 , 45...

The present work presents the determination of the peak flow in a region strongly subject to flooding. This is Severino Meireles street, part of the Independência Stream Hydrographic Basin, in the municipality of Juiz de Fora, Brazil. After a review of the literature on local floods, it is a question of estimating the hydrological flow of floods. T...

Prediction of the flow pattern is a central problms in multi-phase flow analysis. It is a vital point for researchers to accurately predict which flow pattern category types will occur at different flow rates. For this purpose, a mathematical model using the MATLAB (R2017b) computer program is developed for the prediction of gas-liquid two-phase fl...

Weirs are discharge measurement structures have different geometrical shapes. The performances of the modified triangular plan form weirs were studied under free-flow condition. Three groups of weirs were tested experimentally. The first group has a flat top; the second has one slope and the third has two slopes. Each group has three vertex angles...

Sills under sluice gates is used in hydraulic structures; their effect on the head generated upstream gates for certain rate of flow is related to the height and length of sill. A study is held in laboratory flume on four different prismatic sill heights and one model without sill by changing the gate opening four times for each model. Statistical...

The aim of the present investigation is to study the effects of side slope, bed slope and bed roughness on the flow over free overfalls in trapezoidal channels. Three models of trapezoidal free overfall channels have been built and tested in a laboratory flume; each model had four different bed slopes. For each slope, the bed was roughened using ar...

The aim of the present investigation is to study the effect of both side and bed slopes on the flow over free overfalls in trapezoidal channels, three models of trapezoidal free overfall channels have been built and tested in a laboratory flume. These models had 0.1m bed width and 3.7m length with different values of side slope (m = 0.268, 0.577, a...

The aim of this research is to investigate the effect of surface roughness on the performance of weir and gate. An experimental study in a laboratory flume is carried out to study flow over and under cylindrical weir gate in combined structure as flow measurement device. Four models having different diameters were tested in a laboratory flume. In e...

The aim of this study is to investigate the effects of surface roughness sizes on the discharge coefficient for a broad crested weirs. For this purpose, three models having different lengths of broad crested weirs were tested in a horizontal flume. In each model, the surface was roughed four times. Experimental results of all models showed that the...