About
25
Publications
4,029
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
121
Citations
Introduction
Roksana Licow currently works at the Department of Rail Transportation and Bridges, Gdansk University of Technology. Roksana does research in Civil Engineering, Railway Engineering and Transportation Engineering. Their most recent publication is 'Badania wstępne możliwości oceny stanu powierzchni tocznej szyn za pomocą zjawisk wibroakustycznych'.
Current institution
Education
October 2014 - October 2018
Publications
Publications (25)
Poziom zjawisk wibroakustycznych generowanych przez pojazdy samochodowe i kolejowe do środowiska jest zależny od wielu czynników. Są nimi np.: typ/rodzaj opon i nawierzchni, opór aerodynamiczny, konstrukcja pojazdu i jego stan techniczny. Dodatkowo impulsy dźwiękowe mogą pochodzić od uderzeń opon w znajdujące się na drodze przeszkody i infrastruktu...
The sound levels along with the cutting power registered during the sawing process of the impregnated and non-impregnated pine wood at two feed speeds are shown and compared in this paper. Statistically significant differences in the acoustic signals occurred at the lower feed rate. The differences became smaller with an increase in the feed speed....
The article presents a comprehensive method for using vibration signals to diagnose railway tracks. The primary objective is to gather detailed information on track conditions through a passive experiment. This involves using mobile diagnostic tools and techniques to assess railway infrastructure. The article elaborates on the range of diagnostic a...
Environmental noise pollution is nowadays one of the most serious health threats. The impact of noise on the human body depends not only on the sound level but also on its spectral distribution. Reliable measurements of the environmental noise spectrum are often hampered by the very high price of top quality measuring devices. This paper explores t...
Environmental pollution by noise is one of the most serious health threats nowadays. The impact of noise on the human body depends not only on the sound level but also on its spectral distribution. Reliable measurements of the environmental noise spectrum are often hampered by the very high price of top quality measuring devices. This paper explore...
The article presents a solution to the problem of limited accuracy of dynamic measurements performed with GNSS receivers. The proposed measurement method is a response to the needs related to the assessment of the measurement uncertainty of the position of the track axis of the rail transport line. However, the problem of reducing the measurement u...
The article discusses an important issue of railway line construction and maintenance, which fundamentally is the verification of geometric parameters of the railway track. For this purpose, mobile measurements have been performed using a measuring platform with two properly arranged GNSS receivers, which made it possible to determine the base vect...
This paper concerns the assessment of railway track surface conditions in relation to the degree of weed infestation. The paper conceptually describes the proposed method using a visual system to analyse weed infestation level. The use of image analysis software for weed detection is also proposed. This new measurement method allows for a mobile as...
The article presents the results of satellite railway track position measurements performed by a multidisciplinary research team, the members of which represented Gdansk University of Technology and Gdynia Maritime University. Measuring methods are described which were used for reconstructing the railway track axis position and diagnosing railway t...
The article discusses the applicability of a novel method to determine horizontal curvature of the railway track axis based on results of mobile satellite measurements. The method is based on inclination angle changes of a moving chord in the Cartesian coordinate system. In the presented case, the variant referred to as the method of two virtual ch...
The article presents the method for the evaluation of selected manufacturing processes using the analysis of vibration and sound signals. This method is based on the use of sensors installed outside the machining zone, allowing to be used quickly and reliably in real production conditions. The article contains a developed measurement methodology ba...
The shape of the railway track axis and its position in the global coordinate system are essential when defining design parameters of the railway. Correct reconstruction of these quantities is vital for both verifying the compliance of real track parameters with the design and for diagnosing, as all track deformations can also be defined as deviati...
W pracy przedstawiono wyniki badań poziomów dźwięku w przestrzeni pasażerskiej elektrycznego zespołu trakcyjnego (EZT) serii EN57 podczas postoju, rozruchu, jazdy oraz hamowania. Badania przeprowadzono na podstawie autorskiej metodyki badawczej bazując na normie PNEN ISO 3381:Kolejnictwo. Akustyka. Pomiar hałasu wewnątrz pojazdów szynowych. Badania...
The article discusses an important issue in connection with the technique of mobile Global Navigation Satellite System (GNSS) measurements of railway track coordinates, which is digital filtering performed to precisely determine railway track axes. For this purpose, a measuring technique is proposed which bases on the use of a measuring platform wi...
The problem of the reproduction of the railway geometric layout in the global spatial system is currently solved in the form of measurements that use geodetic railway networks and also, in recent years, efficient methods of mobile positioning (mainly satellite and inert). The team of authors from the Gdańsk University of Technology and the Maritime...
Satellite geodetic networks are commonly used in surveying tasks, but they can also be used in mobile surveys. Mobile satellite surveys can be used for trackage inventory, diagnostics and design. The combination of modern technological solutions with the adaptation of research methods known in other fields of science offers an opportunity to acquir...
The article discusses a preliminary concept of a method enabling the identification of chosen rail running surface defects, such as squats, spalling, and running surface defects, by analysing the parameters of vibration signals. It features a description of the methodology of the conducted tests, the scope thereof, and the selection of the measurem...
W artykule przedstawiono metodę identyfikacji wybranych wad powierzchni tocznej szyn takich, jak: squat, wada powierzchni tocznej i wybuksowanie, za pomocą parametrów sygnałów drganiowych. Opisano metodykę prowadzonych badań, zakres badań oraz wybór punktów pomiarowych z różnymi rodzajami wad. Przedstawiono wybrane wyniki badań drgań, wyniki analiz...
W poszukiwaniu optymalnego wykorzystania środków finansowych przedsiębiorstwa kolejowego (PKP PLK) oraz czasu planowania napraw torowisk stworzono model trwałości toru. Model w swych założeniach opiera się na parametrach techniczno–eksploatacyjnych linii kolejowej nr 131. W artykule przedstawiono dwa warianty procesu trwałości toru. Pierwszy warian...
Diagnostyka nawierzchni kolejowej jest istotnym elementem składowym czynników wpływających na poprawę stanu technicznego infrastruktury kolejowej w Polsce. Monitorowanie zmian zachodzących na powierzchni tocznej szyn jest bardzo ważnym elementem w kontekście poziomu bezpieczeństwa przewozów prowadzonych transportem szynowym. W artykule przedstawion...
