Pornchai Rachtanapun

Chiang Mai University | CMU · Faculty Of Agro-Industry

Bifidobacteria, a major bacterial group, have several beneficial impacts on health, such as enhancing the intestinal flora by limiting the colonization of pathogenic microorganisms and stimulating the immune system. As a result, bifidobacteria have been extensively included in various food products. In this study, Bifidobacterium breve TISTR 2130 w...

With the growing interest in environmentally friendly and personalized medicines, new concept for combining three-dimensional printing (3DP) with natural-based biomaterials derived from agro-food wastes has emerged. This approach provides sustainable solutions for agricultural waste management and potential for developing of novel pharmaceutical pr...

Oryza sativa L. cv. Pieisu 1 CMU (PES1CMU) has a high anthocyanin content in the colored bran and high phenolic content in the husk. Biologically active compounds in plants are available as dietary supplements and cosmetics. To expand the utilization of natural resources, PES1CMU will be a natural remedy for skin hyperpigmentation and aging. Cell-f...

The pulsed electric field (PEF) was applied to improve the extraction yield and properties of rice bran proteins from two rice varieties ("Kum Chao Mor Chor 107" and "Kum Doi Saket"). As compared to the conventional alkaline extraction, PEF treatment at 2.3 kV for 25 min increased the protein extraction efficiency by 20.71-22.8% (p < 0.05). The mol...

Alopecia and gray hair are common hair abnormalities affecting physical appearance and causing psychological problems. Chemical treatments partially restore hair disorders but have distressing side effects. Bioactive plant compounds constitute promising sources of potential medicinal substances instead of chemical agents, producing high side effect...

Chicken feather (CF), pig bristle (PB), and pig hoof (PH) are substantial keratin wastes from slaughterhouses. They are generated in large quantity, almost totally unexploited protein resources, and potential substrate for value‐added products. In this study, Thermoactinomyces vulgaris TK1‐21 showed a high ability to produce keratinases for the deg...

The aim of this study is to identify the effects of KDML105 bran extract on gene expression involving the hair cycle in HFDPCs and investigate its bioactive constituents, antioxidant, and anti-inflammatory activities. The content of tocopherols, γ-oryzanol, phytic acid, and phenolic compounds was quantified by liquid chromatography. Free fatty acid...

Open burning of agricultural residues causes numerous complications including particulate matter pollution in the air, soil degradation, global warming and many more. Since they possess bio-conversion potential, agro-industrial residues including sugarcane bagasse (SCB), rice straw (RS), corncob (CC) and sweet sorghum bagasse (SSB) were chosen for...

Leaves of guava (Psidium guajava L.) have been used in Thai folk medicine without any supporting evidence as a traditional herbal remedy for hair loss. Androgenetic alopecia (AGA) is chronic hair loss caused by effects of androgens in those with a genetic predisposition, resulting in hair follicle miniaturization. Our objectives were to provide the...

This research was aimed at developing a dental prototype from 3D printing technology using a synthetic filament of polylactic acid (PLA) and zirconium dioxide (ZrO2) with glycerol and silane coupling agent as a binder. A face-centered central composite design was used to study the effects of the filament extrusion parameters and the 3D printing par...

An antimicrobial thermoplastic starch (TPS) was developed by melt-mixing TPS with chlorhexidine gluconate (CHG) and epoxy resin (Er). The tensile strength and hardness of the TPSCh blend increased with the addition of Er (TPSCh/Er), especially at 5 wt% Er (TPSCh/Er5) (19.5 MPa and 95 %, respectively). The water contact angle of TPSCh/Er was higher...

Open burning of agricultural residues causes numerous complications including particulate matter pollution in the air, soil degradation, global warming and many more. Since they possess bio-conversion potential, agro-industrial residues including sugarcane bagasse (SCB), rice straw (RS), corncob (CC) and sweet sorghum bagasse (SSB) were chosen for...

Abstract Histamine concentration increases in meats, such as fresh pork, when contaminated with some bacteria. Galangal extract, known for its antimicrobial properties, was studied to determine its effects in reducing bacteria in minced pork artificially inoculated with Histamine-Producing Bacteria (HPB) such as Lactobacillus plantarum and to predi...

The nano-metal-treated PET films with anti-virus and anti-fogging ability were developed using sparking nano-metal particles of Ag, Zn, and Ti wires on polyethylene terephthalate (PET) films. Ag nanoparticles were detected on the PET surface, while a continuous aggregate morphology was observed with Zn and Ti sparking. The color of the Ag-PET films...

Day-to-day advancements in food science and technology have increased. Indicators, especially biopolymer-incorporated organic dye indicators, are useful for monitoring the ripeness quality of agricultural fruit products. In this investigation, methylcellulose films—containing pH dye-based indicators that change color depending on the carbon dioxide...

Composite bacterial cellulose (BC) based hydrogel with alginate (A) or pectin (P) or alginate and pectin was fabricated via a physical crosslinking technique using calcium chloride (CaCl2) solution and incorporated with polyhexamethylene biguanide (PHMB) as an effective antimicrobial drug by immersion method. After that, the physicochemical propert...

This study investigated the effects of different saccharides (inulin and fructooligosaccharides (FOS)), pH (8-10) and thermal treatment time (6-24 h) at 70 • C on the structural, functional properties and antioxidant activities of conjugated cricket protein (CCPs) by wet heating Maillard reaction (MR). Results suggested that the browning intensity,...

Green soybean (Glycine max L.) seeds (GSS) are rich in various antioxidants and phytonutrients that are linked to various health benefits. Ultrasound-assisted extraction (UAE) technology was used for extracting the effective components from GSS. A response surface method (RSM) was used to examine the influence of liquid-to-solid ratio and extractio...

In Thai folklore wisdom, shallot (Allium ascalonicum L.) was applied as a traditional herbal medicine for hair growth promotion with no scientific evidence. Androgenetic alopecia (AGA) is a progressive hair loss caused by multiple factors, including androgen hormones, inflammation, and oxidative stress. Conventional medicines (finasteride, dutaster...

We developed a new healthy gummy jelly from tilapia skin-derived gelatine and four rice cultivar powders. The gelatine from the tilapia fish skin was obtained using acid and alkaline extraction. The extracted gelatine comprised 96.77 ± 0.96% protein and featured a breaking force of 5.21± 0.58 g, which indicates high gel strength. The fish gelatine...

Phytocannabinoids are isoprenylated resorcinyl polyketides produced mostly in glandular trichomes of Cannabis sativa L. These discoveries led to the identification of cannabinoid receptors, which modulate psychotropic and pharmacological reactions and are found primarily in the human central nervous system. As a result of the biogenetic process, al...

Sperm sexing technique is favored in the dairy industry. This research focuses on the efficiency of bovine sperm sexing using magnetic-activated cell sorting (MACS) by scFv antibody against Y-chromosome-bearing sperm (Y-scFv) coupled to magnetic microbeads and its effects on kinematic variables, sperm quality, and X/Y-sperm ratio. In this study, th...

This study aimed to investigate the preparation of soy protein isolated (SPI) cutlery incorporated with 5-20% (w/w) crude morning glory stem fiber (MGSF). SPI cutlery samples without and with MGSF were subjected to hydraulic hot press molding at 160 °C for 5 min pressing time. SPI with 5% MGSF showed decreased lightness values compared to the contr...

Polymeric nanoparticles are one method to modify the drug release of small hydrophilic molecules. In this study, clindamycin HCl was used as a model drug loaded in carboxymethyl chitosan nanoparticles cross-linked with Ca2+ ions (CMCS-Ca2+). The ultrasonication with experimental design was used to produce CMCS-Ca2+ nanoparticles loading clindamycin...

Cancers are known to have multifactorial etiology. Certain bacteria and viruses are proven carcinogens. Lately, there has been in-depth research investigating carcinogenic capabilities of some bacteria. Reports indicate that chronic inflammation and harmful bacterial metabolites to be strong promoters of neoplasticity. Helicobacter pylori-induced g...

Poly(lactic acid) was melt-blended with epoxy resin without hardener and chitosan (CTS) to prepare modified PLA (PLAEC). Epoxy resin 5% and CTS 1–20% (wt/wt) were incorporated into PLA during melt mixing. PLAEC was melt-blended with an epoxidized natural rubber (ENR) 80/20 wt. The PLAEC CTS 1% blended with ENR (PLAEC1/ENR) showed a high tensile str...

The current revision to Thailand's Narcotics Act (B.E. 2563) permits Thai corporations to produce cannabis (ganja) for therapeutic purposes, as well as conduct beneficial research and development in science and agriculture. While ganja possession, distribution, and use are still illegal in Thailand, the law removes certain elements of Cannabis sati...

Prebiotics are functional food ingredients that assist probiotic growth and render many other health benefits. Mango peel is the biomass of the processing industry and has recently been value-added as a dietary fiber pectin. Besides its general use as a food additive, mango peel pectin (MPP) is partially hydrolyzed by pectinase to obtain pectic oli...

With the ability to fabricate personalized dosage forms and considerably shorter manufacturing time, semisolid extrusion (SSE) 3D printing has rapidly grown in popularity in recent years as a novel, versatile manufacturing method that powers a wide range of applications in the pharmaceutical field. In this work, the feasibility of using SSE 3D prin...

Basils of the genus Ocimum are aromatic plants grown widely throughout the tropical and temperate regions. The essential oils obtained from their aerial parts are enriched with volatile organic compounds with high market demand for food and pharmaceutical industries. The volatile organic compounds have been shown to exhibit biological activities. T...

Chitosan is a biopolymer known for its rapid biodegradability and film-forming properties. This research aimed to synthesize and characterize chitosan films loaded with cashew leaf extract (CLE) obtained from immature and mature cashew leaves via aqueous and 70% ethanolic extraction methods. Freeze-dried CLE samples were dissolved in 50% dimethyl s...

Androgenetic alopecia (AGA), a hair loss disorder, is a genetic predisposition to sensitive androgens, inflammation, and oxidative stress. Unfortunately, current treatments with synthetic medicines contain a restricted mechanism along with side effects, whereas the bioactive constituents of plant extracts are multifunctional, with fewer side effect...

Carboxymethyl chitosan (CMCH) from native chitosan of high molecular weight (H, 310–375 kDa) was synthesized for improving water solubility. The water solubility of high-molecular-weight carboxymethyl chitosan (H-CMCH) was higher than that of native chitosan by 89%. The application of H-CMCH as enhancing the moisturizer in mangosteen extract deodor...

Dictyophora indusiata or Phallus indusiatus is widely used as not only traditional medicine, functional foods, but also, skin care agents. Biological activities of the fruiting body from D. indusiata were widely reported, while the studies on the application of immature bamboo mushroom extracts were limited especially in the wound healing effect. W...

This research examined the changes of black garlic (BG) quality attributes when raw materials of different initial moisture contents (iMC) were used. Fresh garlic bulbs (cv. Thai) were shade-dried for eight weeks at a controlled condition at 29 �C and relative humidity (RH) of 55% to the desired iMC (ranging from ca. 50–70%). BG processing was at 7...

Thermoplastic starch (TPS) was prepared from cassava starch blended with glycerol (70:30 w/w). Gelatin (Gel) was incorporated into the TPS in water. The TPS/Gel was melt-blended with polyethylene-grafted-maleic anhydride (PEMAH). Maximum tensile strength of the TPS/PEMAH/Gel10 (29.3 MPa) increased significantly compared to the TPS/PEMAH blend (6.3...

Concerns regarding the overconsumption of natural resources has provoked the recovery of biopolymers from food processing biomass. Furthermore, the current market opportunity for pectin in other areas has increased, necessitating the search for alternative pectin resources. This is also a step towards the sustainable and circular green economy. Man...

An egg-coating material was developed to extend the shelf-life and freshness of eggs by blending cassava starch (CS) with gelling agents and waxes. The effects of the properties of this egg coating on egg quality were investigated. Hydroxypropyl methylcellulose (HPMC), carboxymethyl cellulose (CMC), beeswax, and paraffin wax were used. CS blended w...

Viral infections may cause serious human diseases. For instance, the recent appearance of the novel virus, SARS-CoV-2, causing COVID-19, has spread globally and is a serious public health concern. The consumption of healthy, proper, functional, and nutrient-rich foods has an important role in enhancing an individual's immune system and preventing v...

The application of hydrophilic polymers in designing and three-dimensional (3D) printing of pharmaceutical products in various dosage forms has recently been paid much attention. Use of hydrophilic polymers and syringe extrusion 3D printing technology in the fabrication of orodispersible films (ODFs) might hold great potential in rapid drug deliver...

Cassava starch was blended with glycerol to prepare thermoplastic starch (TPS). Thermoplastic starch was premixed with sericin (TPSS) by solution mixing and then melt-blended with polyethylene grafted maleic anhydride (PEMAH). The effect of sericin on the mechanical properties, morphology, thermal properties, rheology, and reaction mechanism was in...

The aim of extending shelf-life and maintaining quality is one of the major issues regarding mango fruit preservation. The quality of mango fruits is greatly affected by postharvest factors, especially temperature and fruit treatment. In this study, the effect of coating and storage temperature on the characteristics of mango fruits was investigate...

This study investigated the effect of chitosan particle sizes on the properties of carboxymethyl chitosan (CMCh) powders and films. Chitosan powders with different particle sizes (75, 125, 250, 450 and 850 µm) were used to synthesize the CMCh powders. The yield, degree of substitution (DS), and water solubility of the CMCh powders were then determi...

A mixture of corn starch and glycerol plasticizer (CSG) was blended with latex natural rubber (LNR) and carboxymethyl cellulose (CMC). The addition of 10 phr of CMC improved the Young’s modulus (6.7 MPa), tensile strength (8 MPa), and elongation at break (80%) of the CSG/LNR blend. The morphology of the CSG/LNR/CMC blends showed a uniform distribut...

The edible bamboo mushroom Dictyophora indusiata, the food nutrients and medicinal sources, had been investigated for nutrition compositional analysis. Then, three parts (whole mushroom; WE, peel and green mixture; PGE and core; CE) were determined for antioxidant, MMP‐2 inhibition, and anti‐inflammatory properties. WE depicted the highest bioactiv...

Antimicrobial thermoplastic starch (TPS) was developed using cassava starch, glycerol, and chlorhexidine gluconate (CHG) blend. CHG was added at concentrations of 1%, 5%, 10%, and 20% (wt./wt.) as an antimicrobial additive. The tensile strength and hardness of the blended samples increased with the chlorhexidine gluconate content, especially for 1%...

A blend of cassava starch (CS), carboxymethyl cellulose (CMC), and paraffin was prepared as a coating material to maintain the quality of eggs during 4 weeks of storage at different temperatures. The efficacy of the CS/CMC/paraffin (6/1/0.5% w/v) coating was investigated in terms of the Haugh unit (HU), weight loss, pH, and microbial load at the en...

Polylactic acid (PLA) was melt-blended with epoxy resin to study the effects of the reaction on the mechanical and thermal properties of the PLA. The addition of 0.5% (wt/wt) epoxy to PLA increased the maximum tensile strength of PLA (57.5 MPa) to 67 MPa, whereas the 20% epoxy improved the elongation at break to 12%, due to crosslinking caused by t...

Corn starch (CS) was blended with glycerol, latex natural rubber (LNR), and carboxymethyl cellulose (CMC). The addition of 10 phr of CMC improved the Young’s modulus (6.7 MPa), tensile strength (8 MPa), and elongation at break (80%) of the CSG/LNR blend. The morphology of the CSG/LNR/CMC blends showed a uniform distribution of LNR particles (1–3 µm...

Cassava starch was blended with glycerol to prepare thermoplastic starch (TPS). TPS was premixed with sericin (TPSS) by solution mixing and then melt-blended with polyethylene grafted maleic anhydride (PEMAH). The effect of sericin on the mechanical properties, morphology, thermal properties, rheology, and reaction mechanism was investigated. The t...

Oil resistant thermoplastic elastomers (TPE) were prepared using mung bean thermoplastic starch (MTPS) blending with rubbers and sericin. Sericin was incorporated into MTPS as a compatibilizer. MTPS with sericin (MTPSS) was blended with natural rubber (NR) and epoxidized NR (ENR). Sericin at 5% improved the tensile strength (10 MPa), elastic recove...