Phatiphat Thounthong

King Mongkut's University of Technology North Bangkok | KMUTNB · Department of Teacher Training in Electrical Engineering

This study presents a Hamiltonian control law for constant current - constant voltage (CC-CV) inductive wireless charging. The novel control system design, simulation, and experimentation aimed to confirm the Hamiltonian controller is a superior choice. The wireless charging experiments tested the step-resistant battery simulator and the EV battery...

This paper proposes a new integral-synergetic controller for direct reactive and active powers control (DARPC) for a grid-connected doubly-fed induction generators (DFIGs) in dual-rotor wind power generation applications. The proposed DARPC strategy employs integral-synergetic control (ISC) to regulate the reactive and active powers of the DFIG-bas...

It is noted that the traditional direct filed-oriented control (DFOC) is widely used in the field of electric power generation from wind due to its fast response dynamic, ease of implementation and simplicity, but this strategy is characterized by the presence of large ripples at the level of both active and reactive powers. This work presents a ne...

The purpose of this research is to identify the drivers of innovativeness in a furniture manufacturing company. The scenario is the business environment where the hybridization of Technology Management (TM) and Knowledge Management (KM) is operative to promote innovation. The elements of the Technology Acceptance Model (TAM) and Socialization-Exter...

This study proposes a non‐isolated DC converter, which is connected in series with an inverter, with a high output voltage conversion ratio for application in electricity generation systems to upgrade low‐voltage to high‐voltage DC. The topology of the proposed converter is based on a boost converter, which has the limitation of a low voltage conve...

Wireless electric vehicle (EV) charging is an important operation for valuable EV options in modern life. Inductive wireless EV charging needs constant current and voltage (CC–CV) charge controllers. This paper presents 750 W variable frequency CC–CV inductive wireless charging for an e-golf cart 50 Ah 72 V Li-ion battery. Due to this system’s low...

This work designs a powerful new nonlinear control technique using synergetic control (SC), proportional-integral (PI) controller, and genetic algorithm (GA) for multi-rotor wind energy (MRWE) conversion systems, whereby an asynchronous generator (AG) is used to achieve optimal energy extraction. The direct power control (DPC) technique is used bas...

In this paper, a so-called return control technology applied to a feedback proportional-integral (FPI) controller is used to control a variable-speed multi-rotor wind turbine (VSMRWT) conversion system with a double-powered asynchronous generator (DPAG). This generator is controlled by direct vector control (DVC). However, the proposed DVC based on...

The widespread penetration of distributed energy sources and the use of load response programs, especially in a microgrid, have caused many power system issues, such as control and operation of these networks, to be affected. The control and operation of many small-distributed generation units with different performance characteristics create anoth...

This paper presents ocean wave energy control using the Aquila optimization (AO) technique. An oscillating water column (OWC)-type wave energy converter has been considered that is fitted with a Wells turbine and doubly fed induction generator (DFIG). To achieve maximum power point tracking (MPPT), the rotor speed of the DFIG must be controlled as...

The dynamic and steady-state behaviors of distributed power supply in a DC architecture with a minimized DC bus capacitor is investigated in this paper using the power balance control technique. The circuit is simulated and analyzed using MATLAB Simulink. The proposed system significantly improves the dynamic response of the converter to load steps...

In this article, we approximate analytical solution of Burgers’ equations using the multistage homotopy asymptotic method which are utilized in modern physics and fluid mechanics. The suggested algorithm is an accurate and simple to-utilize semi-analytic tool for non-linear problems. In the current research we investigation the efficiency and accur...

In this paper, the installation of energy storage systems (EES) and their role in grid peak load shaving in two echelons, their distribution and generation are investigated. First, the optimal placement and capacity of the energy storage is taken into consideration, then, the charge-discharge strategy for this equipment is determined. Here, Genetic...

In this paper, the installation of energy storage systems (EES) and their role in grid peak load shaving in two echelons, their distribution and generation are investigated. First, the optimal placement and capacity of the energy storage is taken into consideration, then, the charge discharge strategy for this equipment is determined. Here, Genetic...

With the daily expansion of global energy consumption, developing the power grids is of uttermost importance. However, building a new transmission line is costly and time-consuming, so utilizing the same lines with possible higher transmission capacity is very cost-effective. In this regard, to increase the capacity of the transmission lines, the f...

In this article, the performance of n-type junctionless (JL) double-gate (DG) MOSFET-based biosensors with and without gate stack (GS) has been studied. Here, the dielectric modulation (DM) method is applied to detect biomolecules in the cavity. The sensitivity of n-type JL-DM-DG-MOSFET and n-type JL-DM-GSDG-MOSFET-based biosensors have also been e...

Particle swarm optimisation (PSO) is one of the widely adopted meta-heuristic methods for solving real-life problems. Its practical utility can be further enhanced by improving its performance. In order to acheive this, academics have presented several variants of the original PSO over the past few years, including the quantum PSO (QPSO), bare-bone...

In this study, a comparative sizing design for renewable power systems was developed based on HOMER (Hybrid Optimization of Multiple Energy Resources) and iHOGA (improved Hybrid Optimization by Genetic Algorithms) simulators. A comparative analysis of the solutions obtained with iHOGA and HOMER simulators for the same hybrid renewable power system...

Reconfigurable metamaterials have immense applications in sensing. A refractive index reconfigurable terahertz metamaterial absorber was investigated in this research for gas sensing applications. The absorption spectrum reconfigures with the changes in the surrounding medium’s refractive index. The proposed absorber displays positive permittivity...

The transport sector generates more than 35% of total CO2 emissions. Electric vehicles are the future of transportation systems, and the demand for electric vehicles has grown considerably in the last few years due to government support. Companies worldwide are investing heavily in electric car charging stations based on renewable energy. This rese...

In recent years, the Smart Grid (SG) has been conceptualized as a burgeoning technology for improvising power systems. The core of the communication infrastructure in SGs is the Synchrophasor Communication Network (SCN). Using the SCN, synchrophasor data communication is facilitated between the Phasor Measurement Unit (PMU) and Phasor Data Concentr...

The purpose of this research is to identify the drivers of innovativeness in a furniture manufacturing company. The scenario is the business environment where the hybridization of Technology Management (TM) and Knowledge Management (KM) is operative to promote innovation. The elements of the Technology Acceptance Model (TAM) and Socialization-Exter...

Metamaterial absorbers are used in the terahertz frequency regime as photo-detectors, as sensing elements, in imaging applications, etc. Narrowband absorbers, on account of their ultra-slender bandwidth within the terahertz frequency spectrum, show a significant shift in the absorption peak when an extrinsic entity relative to the absorber, like re...

Oscillations are an intrinsic phenomenon in interconnected power systems, leading to steady-state stability, safety decline, transmission power limitation, and electric power systems' inefective exploitation by developing power systems, particularly by connecting these systems to low-load lines. In addition, they afect the economic performance of t...

This work designs a powerful new nonlinear method using synergetic control (SC), proportional-integral (PI) controller, and genetic algorithm (GA) for multi-rotor wind energy (MRWE) conversion systems, whereby an asynchronous generator is used to achieve optimal energy extraction. The direct power control (DPC) is used based on the proposed synerge...

Here, in this work, the structural, electronic, optical, and transport properties of Magnesium-based group II-VI materials are studied by employing the density functional theory calculations. The WC-GGA and EV-GGA generalized gradient approximations were employed to compute the structure parameters along with the electronic nature of the ternary-ty...

Power electronic converters have a broad scope of applications in various fields of electrical energy utilization. Their fast dynamics and nonlinear structure make their control process has various complexities. Hence, the design of high-speed and powerful controller plays a vital role in the performance quality of these widely used devices. In thi...

The present study suggests that series voltage injection is more effective than parallel current injection to improve voltage quality on the load side. The line voltage can be accurately symmetrized at the connection point by creating and controlling a series voltage component in each phase. This is more reliable and effective than parallel current...

The islanded mode is one of the connection modes of the grid distributed generation resources. In this study, a distributed generation resource is connected to linear and nonlinear loads via a three-phase inverter where a control method needing no current sensors or compensator elements is applied to the distribute generation system in the islanded...

This paper presents a comprehensive review of the technical aspects and challenges in existing public transport services. This review highlights the challenges and solutions for the main subsystems of public transport services, being focused on the influence of public transportation in an urban area with high demographics to identify solutions base...

The electronic structure, optical, and thermoelectric properties of novel Zinc-based group II-VI semiconductors are investigated using first-principles calculations based on density functional theory. The ternary type materials' structural parameters and electronic band profiles were computed with the advanced TB-mBJ potential. Our computations ind...

In this paper, a novel improved gravitational search algorithm–binary particle swarm optimization (IGSA-BPSO) driven proportional-integral-derivative (PID) controller is proposed to deal with issues of automatic generation control (AGC) of interconnected multi-source (thermal-hydro-gas) multi-area deregulated power systems. The effectiveness and ro...

This paper analyses the safe operation of a multi-stack Polymer Electrolyte Membrane Fuel Cell (PEMFC) under normal conditions and partial faults using an innovative power-sharing technique based on Load-Following (LF) control. LF control references are designed based on the power flow balance to track the dynamic load profile. These references con...

span lang="EN-US">This study investigates an auxiliary technique for the integration of inductive coil connectors (AIIC) within a single switched DC converter with high voltage gain for renewable energy source applications. The aim is to develop and improve the rate of voltage gain for both coils by using inductive coil connectors (coupling inducta...

In this study, an analysis and modeling circuit for controlling battery charge solar cells based on data management through internet of things (IoT) is presented. For this proposed, a DC-DC forward resonant reset converter is employed and can be charged at a constant current and constant voltage. Data management of various parameters using IoT tech...

Recent developments in low-power communication and signal processing technologies have led to the extensive implementation of wireless sensor networks (WSNs). In a WSN environment, cluster formation and cluster head (CH) selection consume significant energy. Typically, the CH is chosen probabilistically, without considering the real-time factors su...

The conventional electrical grid is undergoing substantial growth for reliable grid operation and for more efficient and sustainable energy use. The traditional grid is now metamorphosing into a smart grid (SG) that incorporates a diverse, heterogeneous blend of operating measures such as smart appliances, meters, and renewable energy resources. Wi...

The goal of this paper is to obtain the new explicit solutions of the Atangana conformable (AC) fractional Biswas–Milovic (BM) equation with Parabolic law nonlinearity (PLN) which is a class of Schrödinger equation (SE) using a new methodology. This methodology, which is an extension of the direct algebraic method, provides some new solutions that...

This paper analyzes mathematical model, using an averaged large signal model method of solar cells battery charger with dc-dc isolated forward resonant reset converter which can be charged by constant current and voltage. Magnetic field deflecting method with leakage inductance and resonant capacitor was applied to analyze this model. To control co...

A robust and improved control scheme of a variable speed multi-rotor wind turbine (MRWT) system with a doubly fed asynchronous generator (DFAG) is displayed in this work. In order to improve the performances and effectiveness of the traditional direct power control (DPC) strategy of the DFAG, a new kind of sliding mode controller (SMC) called modif...

This paper describes the model-free control approaches for permanent magnet-assisted (PMa) synchronous reluctance motors (SynRMs) drive. The important improvement of the proposed control technique is the ability to determine the behavior of the state-variable system during both fixed-point and transient operations. The mathematical models of PMa-Sy...

This work proposes a new indirect filed-oriented control (IFOC) scheme for double-powered induction generators (DPIGs) in multi-rotor wind turbine systems (MRWTS). The IFOC strategy is characterized by its simplicity, ease of use, and fast dynamic speed. However, there are drawbacks to this method. Among its disadvantages is the presence of ripples...

In recent years, the methods of controlling electrical machines have been witnessing increasing development to reduce torque and electric current fluctuations in electrical power generation systems from renewable sources such as wind energy. The generation of electric power from wind plants imposes the need for an efficient and more robust method i...

This paper presents the analysis, design and simulation of DC distributed power supply controlled with power and energy balance control technique. The proposed system consists of 5 connection structures of DC to DC converters which are parallel, cascade, source splitting, load splitting, and stack. The system mathematical model is analyzed by the a...