Peter Jung

German Aerospace Center (DLR) and Technical University Berlin

Optimizing network utility in device-to-device networks is typically formulated as a non-convex optimization problem. This paper addresses the scenario where the optimization variables are from a bounded but continuous set, allowing each device to perform power control. The power at each link is optimized to maximize a desired network utility. Spec...

Earth observation (EO) plays a crucial role in creating and sustaining a resilient and prosperous society that has far reaching consequences for all life and the planet itself. Remote sensing platforms like satellites, airborne platforms, and more recently dones and UAVs are used for EO. They collect large amounts of data and this needs to be downl...

This work proposes a maximum likelihood-based parameter estimation framework for a multistatic millimeter wave integrated sensing and communication system using energy-efficient hybrid digital-analog arrays. Due to the typically large arrays used in the higher frequency bands to mitigate isotropic path loss, such arrays may operate in the near-fiel...

This work proposes a maximum likelihood (ML)-based parameter estimation framework for a millimeter wave (mmWave) integrated sensing and communication (ISAC) system in a multistatic configuration using energy-efficient hybrid digital-analog (HDA) arrays. Due to the typically large arrays deployed in the higher frequency bands to mitigate isotropic p...

To efficiently utilize the scarce wireless resource, the random access scheme has been attaining renewed interest primarily in supporting the sporadic traffic of a large number of devices encountered in the Internet of Things (IoT). In this paper we investigate the performance of slotted ALOHA -- a simple and practical random access scheme -- in co...

The quantification of predictive uncertainties helps to understand where existing models struggle to find the correct prediction. A useful quality control tool is the task of detecting out-of-distribution (OOD) data by examining the model’s predictive uncertainty. For this task, deterministic single forward pass frameworks have recently been establ...

Deep neural networks based on unrolled iterative algorithms have achieved remarkable success in sparse reconstruction applications, such as synthetic aperture radar (SAR) tomographic inversion (TomoSAR). However, the currently available deep learning-based TomoSAR algorithms are limited to three-dimensional (3D) reconstruction. The extension of dee...

In this study, we consider algorithm unfolding for the multiple measurement vector (MMV) problem in the case where only few training samples are available. Algorithm unfolding has been shown to empirically speed-up in a data-driven way the convergence of various classical iterative algorithms, but for supervised learning, it is important to achieve...

This work proposes a maximum likelihood (ML)-based parameter estimation framework for a millimeter wave (mmWave) integrated sensing and communication (ISAC) system in a multi-static configuration using energy-efficient hybrid digital-analog arrays. Due to the typically large arrays deployed in the higher frequency bands to mitigate isotropic path l...

We investigate radar parameter estimation and beam tracking with a hybrid digital-analog (HDA) architecture in a multi-block measurement framework using an extended target model. In the considered setup, the backscattered data signal is utilized to predict the user position in the next time slots. Specifically, a simplified maximum likelihood frame...

Over the last decade, neural networks have reached almost every field of science and become a crucial part of various real world applications. Due to the increasing spread, confidence in neural network predictions has become more and more important. However, basic neural networks do not deliver certainty estimates or suffer from over- or under-conf...

In this work, we propose a waveform based on Modulation on Conjugate-reciprocal Zeros (MOCZ) originally proposed for short-packet communications in [1], as a new Integrated Sensing and Communication (ISAC) waveform. Having previously established the key advantages of MOCZ for noncoherent and sporadic communication, here we leverage the optimal auto...

Finding sparse solutions of underdetermined linear systems commonly requires the solving of L1 regularized least squares minimization problem, which is also known as the basis pursuit denoising (BPDN). They are computationally expensive since they cannot be solved analytically. An emerging technique known as deep unrolling provided a good combinati...

Deep learning has been highly successful in some applications. Nevertheless, its use for solving partial differential equations (PDEs) has only been of recent interest with current state-of-the-art machine learning libraries, e.g., TensorFlow or PyTorch. Physics-informed neural networks (PINNs) are an attractive tool for solving partial differentia...

In this paper, we propose a novel channel estimation scheme for pulse-shaped multicarrier systems using smoothness regularization for ultra-reliable low-latency communication (URLLC). It can be applied to any multicarrier system with or without linear precoding to estimate challenging doubly-dispersive channels. A recently proposed modulation schem...

Finding sparse solutions of underdetermined linear systems commonly requires the solving of L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sub> regularized least squares minimization problem, which is also known as the basis pursuit denoising (BPDN). They are computationally expensive since the...

In this paper, we propose a novel channel estimation scheme for pulse-shaped multicarrier systems using smoothness regularization for ultra-reliable low-latency communication (URLLC). It can be applied to any multicarrier system with or without linear precoding to estimate challenging doubly-dispersive channels. A recently proposed modulation schem...

In this paper we consider algorithm unfolding for the Multiple Measurement Vector (MMV) problem in the case where only few training samples are available. Algorithm unfolding has been shown to empirically speed-up in a data-driven way the convergence of various classical iterative algorithms but for supervised learning it is important to achieve th...

This work proposes a novel scheme for distributed ranking-based and contention-free resource allocation in large-scale machine-to-machine (M2M) communication networks. We partition a network of N devices into disjoint clusters based on service type, and assign to each cluster a cluster-specific signature for active cluster members to indicate their...

Biomass is an important variable for our understanding of the terrestrial carbon cycle, facilitating the need for satellite-based global and continuous monitoring. However, current machine learning methods used to map biomass can often not model the complex relationship between biomass and satellite observations or cannot account for the estimation...

Countless signal processing applications include the reconstruction of signals from few indirect linear measurements. The design of effective measurement operators is typically constrained by the underlying hardware and physics, posing a challenging and often even discrete optimization task. While the potential of gradient-based learning via the un...

Block-sparse regularization is already well known in active thermal imaging and is used for multiple-measurement-based inverse problems. The main bottleneck of this method is the choice of regularization parameters which differs for each experiment. We show the benefits of using a learned block iterative shrinkage thresholding algorithm (LBISTA) th...

To achieve super-resolution synthetic aperture radar (SAR) tomography (TomoSAR), compressive sensing (CS)-based algorithms are usually employed, which are, however, computationally expensive, and thus is not often applied in large-scale processing. Recently, deep unfolding techniques have provided a good combination of physical model-based algorith...

In this letter, we propose a novel channel estimation scheme with leakage suppression for orthogonal time frequency and space (OTFS) modulation. In OTFS, data and pilot symbols are placed in the delay-Doppler (DD) domain and spread over the time-frequency (TF) domain. This increases the achievable accuracy in estimating linear time-varying (LTV) ch...

We consider the unsourced random access problem on a Rayleigh block-fading AWGN channel with multiple receive antennas. Specifically, we treat the slow fading scenario where the coherence blocklength is large compared to the number of active users and a message can be transmitted in a single fading coherence block. Unsourced random access refers to...

We address the detection of material defects, which are inside a layered material structure using compressive sensing-based multiple-input and multiple-output (MIMO) wireless radar. Here, strong clutter due to the reflection of the layered structure’s surface often makes the detection of the defects challenging. Thus, sophisticated signal separatio...

This article presents deep unfolding neural networks to handle inverse problems in photothermal radiometry enabling super-resolution (SR) imaging. The photothermal SR approach is a well-known technique to overcome the spatial resolution limitation in photothermal imaging by extracting high-frequency spatial components based on the deconvolution wit...

Countless signal processing applications include the reconstruction of signals from few indirect linear measurements. The design of effective measurement operators is typically constrained by the underlying hardware and physics, posing a challenging and often even discrete optimization task. While the potential of gradient-based learning via the un...

In this work, we introduce an iterative algorithm for the Euclidean distance matrix completion (EDMC) problem with noisy and incomplete distance measurements. The proposed method is based on semidefinite programming, utilizes a Pareto iterative approach, and performs a projection-free convex optimization over the spectrahedron to solve a level-set...

In this work we consider the problem of identification and reconstruction of doubly-dispersive channel operators which are given by finite linear combinations of time-frequency shifts. Such operators arise as time-varying linear systems for example in radar and wireless communications. In particular, for information transmission in highly non-stati...

Self-localization based on passive RFID-based has many potential applications. One of the main challenges it faces is the suppression of the reflected signals from unwanted objects (i.e., clutter). Typically, the clutter echoes are much stronger than the backscattered signals of the passive tag landmarks used in such scenarios. Therefore, successfu...

We consider a structured estimation problem where an observed matrix is assumed to be generated as an $s$-sparse linear combination of $N$ given $n\times n$ positive-semi-definite matrices. Recovering the unknown $N$-dimensional and $s$-sparse weights from noisy observations is an important problem in various fields of signal processing and also a...

In this work we treat the unsourced random access problem on a Rayleigh block-fading AWGN channel with multiple receive antennas. Specifically, we consider the slowly fading scenario where the coherence block-length is large compared to the number of active users and the message can be transmitted in one coherence block. Unsourced random access ref...

The projected gradient descent (PGD) method has shown to be effective in recovering compressed signals described in a data-driven way by a generative model, i.e., a generator which has learned the data distribution. Further reconstruction improvements for such inverse problems can be achieved by conditioning the generator on the measurement. The bo...

We consider the problem of sparse signal recovery from noisy measurements. Many of frequently used recovery methods rely on some sort of tuning depending on either noise or signal parameters. If no estimates for either of them are available, the noisy recovery problem is significantly harder. The square root LASSO and the least absolute deviation L...

Due to their increasing spread, confidence in neural network predictions became more and more important. However, basic neural networks do not deliver certainty estimates or suffer from over or under confidence. Many researchers have been working on understanding and quantifying uncertainty in a neural network's prediction. As a result, different t...

Low-rank matrix recovery problems arise naturally as mathematical formulations of various inverse problems, such as matrix completion, blind deconvolution, and phase retrieval. Over the last two decades, a number of works have rigorously analyzed the reconstruction performance for such scenarios, giving rise to a rather general understanding of the...

We address the detection of material defects, which are inside a layered material structure using compressive sensing based multiple-output (MIMO) wireless radar. Here, the strong clutter due to the reflection of the layered structure's surface often makes the detection of the defects challenging. Thus, sophisticated signal separation methods are r...

In compressed sensing the goal is to recover a signal from as few as possible noisy, linear measurements with the general assumption that the signal has only a few non-zero entries. The recovery can be performed by multiple different decoders, however most of them rely on some tuning. Given an estimate for the noise level a common convex approach t...

Unsourced random-access (U-RA) is a type of grant-free random access with a virtually unlimited number of users, of which only a certain number K <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">a</sub> are active on the same time slot. Users employ exactly the same codebook, and the task of the receive...

This paper presents deep unfolding neural networks to handle inverse problems in photothermal radiometry enabling super resolution (SR) imaging. Photothermal imaging is a well-known technique in active thermography for nondestructive inspection of defects in materials such as metals or composites. A grand challenge of active thermography is to over...

In this paper, we study the problem of user activity detection and large-scale fading coefficient estimation in a random access wireless uplink with a massive MIMO base station with a large number $M$ of antennas and a large number of wireless single-antenna devices (users). We consider a block fading channel model where the $M$ -dimensional...

Spot welding is a crucial process step in various industries. However, classification of spot welding quality is still a tedious process due to the complexity and sensitivity of the test material, which drain conventional approaches to its limits. In this paper, we propose an approach for quality inspection of spot weldings using images from laser...

In this work we consider the problem of identification and reconstruction of doubly-dispersive channel operators which are given by finite linear combinations of time-frequency shifts. Such operators arise as time-varying linear systems for example in radar and wireless communications. In particular, for information transmission in highly non-stati...

We combine three different approaches to greatly enhance the defect reconstruction ability of active thermographic testing. As experimental approach, laser-based structured illumination is performed in a step-wise manner. As an intermediate signal processing step, the virtual wave concept is used in order to effectively convert the notoriously diff...

A photothermal super resolution technique is proposed for an improved inspection of internal defects. To evaluate the potential of the laser-based thermographic technique, an additively manufactured stainless steel specimen with closely spaced internal cavities is used. Four different experimental configurations in transmission, reflection, stepwis...

Block-sparse regularization is already well-known in active thermal imaging and is used for multiple measurement based inverse problems. The main bottleneck of this method is the choice of regularization parameters which differs for each experiment. To avoid time-consuming manually selected regularization parameter, we propose a learned block-spars...

In this work we treat the unsourced random access problem on a Rayleigh block-fading AWGN channel with multiple receive antennas. Specifically, we consider the slowly fading scenario where the coherence block-length is large compared to the number of active users and the message can be transmitted in one coherence block. Unsourced random access ref...

Deep unfolding showed to be a very successful approach for accelerating and tuning classical signal processing algorithms. In this paper, we propose learned Gaussian-mixture AMP (L-GM-AMP) - a plug-and-play compressed sensing (CS) recovery algorithm suitable for any i.i.d. source prior. Our algorithm builds upon Borgerding's learned AMP (LAMP), yet...

In this paper we propose super resolution measurement and post-processing strategies that can be applied in thermography using laser line scanning. The implementation of these techniques facilitates the separation of two closely spaced defects and avoids the expected deterioration of spatial resolution due to heat diffusion. The experimental studie...

We address the detection of material defects, which are inside a layered material structure by multiple input multiple output (MIMO) wireless sensing from compressive measurements. However, due to reflections from the surface of the layered material structure the defect detection is challenging. To cope with this challenge, advanced signal processi...

Spot welding is a crucial process step in various industries. However, classification of spot welding quality is still a tedious process due to the complexity and sensitivity of the test material, which drain conventional approaches to its limits. In this paper, we propose an approach for quality inspection of spot weldings using images from laser...

It is well-established that many iterative sparse reconstruction algorithms can be unrolled to yield a learnable neural network for improved empirical performance. A prime example is learned ISTA (LISTA) where weights, step sizes and thresholds are learned from training data. Recently, Analytic LISTA (ALISTA) has been introduced, combining the stro...

We consider the problem of sparse signal recovery from noisy measurements. Many of frequently used recovery methods rely on some sort of tuning depending on either noise or signal parameters. If no estimates for either of them are available, the noisy recovery problem is significantly harder. The square root LASSO and the least absolute deviation L...

We propose a compressed sensing-based testing approach with a practical measurement design and a tuning-free and noise-robust algorithm for detecting infected persons. Compressed sensing results can be used to provably detect a small number of infected persons among a possibly large number of people. There are several advantages of this method comp...

This paper shows how data-driven deep generative models can be utilized to solve challenging phase retrieval problems, in which one wants to reconstruct a signal from only few intensity measurements. Classical iterative algorithms are known to work well if initialized close to the optimum but otherwise suffer from non-convexity and often get stuck...

We investigate practical aspects of a recently introduced blind (noncoherent) communication scheme, called modulation on conjugate-reciprocal zeros (MOCZ). MOCZ is suitable for a reliable transmission of sporadic and short-packets at ultra-low latency and high spectral efficiency via unknown multipath channels, which are assumed to be static over t...

A photothermal super resolution technique is proposed for an improved inspection of internal defects. To evaluate the potential of the laser-based thermographic technique, an additively manufactured stainless steel specimen with closely spaced internal cavities is used. Four different experimental configurations in transmission, reflection, stepwis...

Information and communication technologies have accompanied our everyday life for years. A steadily increasing number of computers, cameras, mobile devices, etc. generate more and more data, but at the same time we realize that the data can only partially be analyzed with classical approaches. The research and development of methods based on artifi...

In compressed sensing the goal is to recover a signal from as few as possible noisy, linear measurements. The general assumption is that the signal has only a few non-zero entries. Given an estimate for the noise level a common convex approach to recover the signal is basis pursuit denoising (BPDN). If the measurement matrix has the robust null spa...

We consider a structured estimation problem where an observed matrix is assumed to be generated as an $s$-sparse linear combination of $N$ given $n\times n$ positive-semidefinite matrices. Recovering the unknown $N$-dimensional and $s$-sparse weights from noisy observations is an important problem in various fields of signal processing and also a r...

This paper presents different super resolution reconstruction techniques to overcome the spatial resolution limits in thermography. Pseudo-random blind structured illumination from a one-dimensional laser array is used as heat source for super resolution thermography. Pulsed thermography measurements using an infrared camera with a high frame rate...