Paola Mura

University of Florence | UNIFI · Dipartimento di Chimica "Ugo Schiff"

Background: Propranolol, largely prescribed as an antihypertensive and antiarrhythmic drug in pediatrics, is characterized by a bitter taste and an astringent aftertaste. Currently, the therapy requires crushing of tablets for adults and their dispersion in water many times a day, leading to loss of dosing accuracy, low palatability, and poor compl...

New oral tablets of nebivolol have been developed aiming to improve, by cyclodextrin (CD) complexation, its low solubility/dissolution properties—the main reason behind its poor/variable oral bioavailability. Phase-solubility studies, performed using βCD and highly-soluble βCD-derivatives, indicated sulfobutylether-βCD (SBEβCD) as the best solubili...

Orally disintegrating granules (ODGs) are a pharmaceutical form commonly used for the administration of NSAIDs because of their easy assumption and fast dispersion. The development of ODGs is not easy for drugs like dexketoprofen trometamol (DXKT), which have a bitter and burning taste. In this work, high-shear coating (HSC) was used as an innovati...

Propranolol (PPN) is widely used in children to treat various cardiovascular diseases. The availability of a suitable PPN solution should avoid recourse to extemporaneous preparations of unknown/limited stability, as commonly made in hospital pharmacies. However, the development of pediatric PPN solutions is hindered by their instability to light a...

There is a serious need of pediatric drug formulations, whose lack causes the frequent use of extemporaneous preparations obtained from adult dosage forms, with consequent safety and quality risks. Oral solutions are the best choice for pediatric patients, due to administration ease and dosage-adaptability, but their development is challenging, par...

Nanogels combine the properties of hydrogels and nanocarrier systems, resulting in very effective drug delivery systems, including for cutaneous applications. Cyclodextrins (CDs) have been utilised to enhance the nanogels’ loading ability towards poorly soluble drugs and promote/sustain drug release. However, formation of CD-based nanogels requires...

Chitosan (CS) is a linear polysaccharide obtained by the deacetylation of chitin, which, after cellulose, is the second biopolymer most abundant in nature, being the primary component of the exoskeleton of crustaceans and insects. Since joining the pharmaceutical field, in the early 1990s, CS attracted great interest, which has constantly increased...

Flufenamic acid (FFA) is a non-steroidal anti-inflammatory drug characterised by a low solubility and problems of variable dissolution rate and bio-inequivalence. Different FFA batches, obtained by different suppliers, showed different powder characteristics (particle size, shape and surface properties) that may affect its dissolution behaviour fro...

Curcumin (Cur) is an anti-inflammatory polyphenol that can be complexed with polymeric cyclodextrin (CD) to improve solubility and bioavailability. The aim of the present work was to prepare a CurCD hydrogel to treat inflammatory skin conditions. Epichlorohydrin-β-CD (EpiβCD) was used as polymeric CD. To characterize the binary system, solid-state...

Cefixime (CEF) is a cephalosporin included in the WHO Model List of Essential Medicines for Children. Liquid formulations are considered the best choice for pediatric use, due to their great ease of administration and dose-adaptability. Owing to its very low aqueous solubility and poor stability, CEF is only available as a powder for oral suspensio...

The Food and Drug Administration (FDA)’s guidelines and the Process Analytical Technology (PAT) approach conceptualize the idea of real time monitoring of a process, with the primary objective of improvement of quality and also of time and resources saving. New instruments are needed to perform an efficient PAT process control and Near Infrared Spe...

A thermosensitive, mucoadhesive in-situ gel for clonazepam (CLZ) intranasal delivery was developed, which aimed to achieve prolonged in-situ residence and controlled drug release, overcoming problems associated with its oral or parenteral administration. Poloxamer was selected as a thermosensitive polymer and chitosan glutamate and sodium hyalurona...

This work was aimed at enhancing butamben (BTB) anesthetic efficacy by the “drug-in cyclodextrin (CD)-in deformable liposomes” strategy. In the study, phase-solubility studies with natural (α-, β-, γ-) and derivative (hydroxypropyl-α-and β-, sulfobutylether-β, methyl-β) CDs evidenced the highest BTB affinity for βCD and its derivatives and indicate...

The aim of this study was the optimization of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in terms of physicochemical and biopharmaceutical properties, to develop effective and stable aqueous liquid formulations of hydrochlorothiazide, suitable for paediatric therapy, overcoming its low-solubility and poor-stability prob...

Metronidazole is the drug of choice in the treatment of bacterial vaginosis, but the oral therapy can induce several collateral effects. Aim of this work was the development of a vaginal multiparticulate system loaded with metronidazole able to improve its residence time allowing a complete drug release. Several kinds of MS were prepared using chit...

Osteoarthritis (OA) is one of the most frequent degenerative joint diseases characterized by joint pain and stiffness traditionally treated with symptomatic drugs such as oral nonsteroidal anti-inflammatory drugs (NSAIDs )and, in extreme cases, with intra-articular corticoids. However, both these drugs are not exempt from adverse effects. Curcumin...

Hydrochlorothiazide (HCT) is widely used in pediatrics for hypertension management. Due to the lack of pediatric commercial forms, community or hospital pharmacies generally prepare HCT extemporaneous pediatric suspensions by dispersing in water a portion of a crushed tablet or the drug powder; however, any dose or stability control is usually done...

The aim of this work was to evaluate the effectiveness of mesoporous clays or silicas to develop fast-dissolving glyburide tablets based on a liquisolid approach. Selected clay (Neusilin®US2) and silica (Aeroperl®300) allowed preparation of innovative drug liquisolid systems containing dimethylacetamide or 2-pyrrolidone as drug solvents, without us...

Complexation with cyclodextrins (CDs) has been widely and successfully used in pharmaceutical field, mainly for enhancing solubility, stability and bioavailability of a variety of drugs. However, some important drawbacks, including rapid removal from the bloodstream after in vivo administration, or possible replacement, in biological media, of the...

Hydrochlorothiazide (HCT), a Biopharmaceutical Classification System (BCS) class IV drug, is characterized by low solubility and permeability, that negatively affect its oral bioavailability, reducing its therapeutic efficacy. The combined use of cyclodextrins (CDs) and nanoclays (NCs) recently proved to be a successful strategy in developing deliv...

Flufenamic acid is a nonsteroidal anti-inflammatory drug characterized by a low solubility and a variable oral bioavailability. Flufenamic acid is present in the commercial products in two polymorphic enantiotropic forms (Form I and III). Bioinequivalence was observed for commercial solid dosage forms due to the different dissolution rate of batche...

The performance of a series of inorganic salts as direct compression excipients was systematically evaluated. The physical-chemical and technological properties of the different salts were investigated in terms of crystalline/amorphous state, morphology, granulometry, apparent/tapped density, specific surface area, flowability, compressibility, dil...

This work evaluated the suitability of various mesoporous silicas as carriers for developing an oral formulation endowed with improved dissolution properties of glibenclamide, hypoglycemic agent poorly water-soluble. The different silicas were examined for solid-state, morphology, and technological and physical-chemical properties (granulometry, sp...

The development of specific and age-appropriate pediatric formulations is essential to assure that all children and their care-givers can easily access to safe and effective dosage forms. The need for developing specific pediatric medicinal products has been highlighted by the European Medicines Agency. The aim of this study was to investigate the...

In this study, the encapsulation of curcumin (Cur) in “drug-in-cyclodextrin-in-liposomes (DCL)” by following the double-loading technique (DL) was proposed, giving rise to DCL–DL. The aim was to analyze the effect of cyclodextrin (CD) on the physicochemical, stability, and drug-release properties of liposomes. After selecting didodecyldimethylammon...

The hydrochlorothiazide (HCT) low solubility and permeability give rise to limited and variable bioavailability; its low stability makes it difficult to develop stable aqueous liquid formulations; its low dose makes the achievement of a homogeneous drug distribution very difficult. Thus, the aim of this study was to investigate the effectiveness of...

Among the different techniques proposed for preparing cyclodextrin inclusion complex in the solid state, mechanochemical activation by grinding appears as a fast, highly efficient, convenient, versatile, sustainable, and eco-friendly solvent-free method. This review is intended to give a systematic overview of the currently available data in this f...

The work was aimed at developing an in vitro method able to provide rapid and reliable evaluation of drug absorption through buccal mucosa. Absorption simulator apparatus endowed with an artificial membrane was purposely developed by experimental design. The apparent permeation coefficient (Papp) through excised porcine buccal mucosa of naproxen, s...

A delivery system based on poly(lactic-co-glycolic acid) polymer (PLGA) microparticles has been developed for parenteral administration of the local anesthetic prilocaine in its free base form. Both drug-free and drug-loaded microparticles, prepared by a double-emulsion-evaporation method, were characterized for mean size by Laser Diffraction Analy...

Chitosan-alginate microspheres (MS) were developed for cefixime vaginal administration, to overcome problems associated with its oral administration. The effect of increasing drug-loading amount, by keeping the chitosan-alginate content constant, was investigated. Mucoadhesion studies indicated that all formulations assured in situ permanence longe...

Previous studies proved the effectiveness of an intravenous PEGylated liposomal formulation of opiorphin (1 mg/mL) in protecting the drug from enzymatic degradation, and improving intensity and duration of its painkilling effect. Therefore, considering the advantages of nasal administration, the aim of this work was the development of a liposomal m...

Metformin is an oral hypoglycemic agent used in the type 2 diabetes, whose poor bioavailability and short half-life make the development of effective extended-release formulations highly desirable. Different metformin-loaded chitosomal and niosomal formulations were developed and suitably characterized, but were unable to provide the desired sustai...

Background: Frovatriptan is a potent anti-migraine agent with unfavourable slow onset of action, available on the market as film-coated tablets. Objective: optimization, by Quality by Designs strategies, of an orally disintegrating tablet (ODT) formulation of frovatriptan aimed to make its oral administration easier and its dissolution faster th...

Previous studies highlighted an increase of the randomly-methylated-ß-cyclodextrin (RAMEB) solubilizing power towards oxaprozin when used in combination with L-arginine (ARG) or sepiolite nanoclay (SV). Therefore, the aim of this work was to investigate the possibility of maximising the RAMEB solubilizing efficacy by a joined approach based on the...

An innovative pediatric oral formulation of hydrochlorothiazide (HCT) (2 mg/mL), endowed with improved bioavailability and sustained release properties and suitable for the hypertension treatment in pediatric patients, was developed by combining the drug-cyclodextrin complexation and the incorporation of the complex into Solid Lipid Nanoparticles (...

The combined strategy of drug-cyclodextrin (CD) complexation and complex loading into nanocarriers (deformable liposomes or nanostructured lipid carriers (NLC)), was exploited to develop effective topical formulations for oxaprozin transdermal administration. Oxaprozin was loaded as ternary complex with randomly-methylated-ßCD and arginine, selecte...

The influence of l-arginine on the complexing and solubilizing power of randomly-methylated-β-cyclodextrin (RameβCD) towards oxaprozin, a very poorly soluble anti-inflammatory drug, was examined. The interactions between the components were investigated both in solution, by phase-solubility analysis, and in the solid state, by differential scanning...

Two kinds of mucoadhesive buccal tablets of clonazepam (CLZ) were developed to provide, a prolonged local or systemic delivery respectively. Tablets prepared by direct compression of combinations of different polymers were tested for swelling, erosion and residence time properties. Carbopol 971P/hydroxypropylmethylcellulose and Poloxamer/chitosan m...

A combined approach based on drug complexation with cyclodextrins, and complex entrapment in nanoclays has been investigated, to join in a single delivery system the benefits of these carriers and potentiate their ability to improve the dissolution properties of oxaprozin (OXA), a poorly water-soluble anti-inflammatory drug. Based on previous studi...

The aim of this work was to develop effective fast-dissolving tablet formulations of glyburide, endowed with improved dissolution and technological properties, investigating the actual effectiveness of the Solid-Self MicroEmulsifying Drug Delivery System (S-SMEDDS) approach. An initial screening aimed to determine the solubility of the drug in diff...

Objective: To develop a new vaginal delivery system for a sustained release of dehydroepiandrosterone (DHEA) in the treatment of postmenopausal symptoms, aimed to overcome the problems of poor bioavailability of the drug related to its very low water solubility. Methods: Cyclodextrin (CD)-containing hydrogels were developed, combining in a singl...

A solid lipid nanoparticle (SLN) formulation was developed with the aim of improving the oral bioavailability and the therapeutic effectiveness of glibenclamide (GLI), a poorly water-soluble drug used in the treatment of type 2 diabetes. The SLN was prepared using different lipid components (Precirol® and Compritol®) and preparation procedures. Pre...

The development of new more effective therapeutic treatments for pain relief is essential for enhancing the patient quality of life and safety and avoiding or limiting risks of abuse, addiction or serious injuries posed by some of the present pain therapies. With this aim, in the last years, several advanced delivery systems have been developed to...

A fast capillary zone electrophoresis method for the simultaneous analysis of glibenclamide and its impurities (IA and IB) in pharmaceutical dosage forms was fully developed within a quality by design framework. Critical quality attributes were represented by IA peak efficiency, critical resolution between glibenclamide and IB, and analysis time. E...

The objective of this study was the development of a niosomal formulation for improving skin permeation and penetration of 5-aminolevulinic acid (ALA) in the treatment of skin malignancies by photodynamic therapy (PDT). Different niosomal dispersions were prepared, using two different preparation methods. The effect of addition to a classic formula...

Two new sulfonamides incorporating arylsulfonylureido moieties were complexed with gamma cyclodextrin (γ-CD), hydroxypropyl-gamma cyclodextrin (HPγ-CD), hydroxypropyl-beta cyclodextrin (HPβ-CD) and hydroxyethyl-beta cyclodextrin (HEβ-CD) in order to obtain drug formulations with effective topical intraocular pressure (IOP) lowering effects, in an a...

The aim of this work was to develop a topical formulation with improved permeation properties of acyclovir. Ursodeoxycholic (UDC) and dehydrocholic (DHC) acids were tested as potential enhancers, alone or in combination with different aminoacids. Equimolar binary and ternary systems of acyclovir with cholic acids and basic, hydrophilic or hydrophob...

Background Conventional and PEGylated liposomes were developed, aimed at improving the pain-killing effect of opiorphin. Methods The antinociceptive action of the formulations was investigated on rats (tail-flick test), and compared with that of opiorphin and morphine aqueous solutions (all at 5 mg/kg). Results Opiorphin loading in conventional l...

The goal of this work was to combine the ketoprofen anti-inflammatory effect with the ascorbic acid antioxidant properties for a more efficient treatment of colonic pathologies. With this aim, microspheres (MS) based on both waxy materials (ceresine, Precirol(®) and Compritol(®)) or hydrophilic biopolymers (pectine, alginate and chitosan) loaded wi...

Cyclodextrins are cyclic oligosaccharides able to form inclusion complexes with a variety of hydrophobic guest molecules, positively modifying their physicochemical properties. A thorough analytical characterization of cyclodextrin complexes is of fundamental importance to provide an adequate support in selection of the most suitable cyclodextrin f...

Cyclodextrins are cyclic oligosaccharides endowed with a hydrophilic outer surface and a hydrophobic inner cavity, able to form inclusion complexes with a wide variety of guest molecules, positively affecting their physicochemical properties. In particular, in the pharmaceutical field, cyclodextrin complexation is mainly used to increase the aqueou...

A niosomal formulation, functionalized with N-palmitoylglucosamine, was developed as potential brain targeted delivery system of dynorphin-B. In fact, this endogenous neuropeptide, selective agonist of k opioid receptors, is endowed with relevant pharmacological activities on the central nervous system, including a marked antinociceptive effect, bu...

The aim of this work was to investigate in-depth interactions of econazole nitrate (ECN), a very poorly water-soluble antifungal agent, with different β-cyclodextrin (βCD) derivatives, and to evaluate the potential synergistic effect of suitable third compounds (l-amino acids, citric acid, hydrophilic polymers). Phase-solubility studies showed the...

Clonazepam (CLZ) is a benzodiazepine derivative, whose bioavailability, limited by its very poor water-solubility, could be improved by cyclodextrin complexation. However, the choice of the most proper cyclodextrin to use to fully exploit its potential favourable effects on the drug, is a critical step. Therefore, in the present work, the performan...

Context: Celecoxib is an anti-inflammatory drug, specific inhibitor of COX-2, classified as a BCS class II compound due to its very low aqueous solubility (3 μg/mL) and good permeability. Objective: An innovative micellar formulation of celecoxib has been developed to increase its solubility and, consequently, its oral bioavailability. Material...

beta-Cyclodextrin (beta CD) and its soluble polymeric derivative (EPI beta CD) were used to improve the effectiveness of chitosan-based bucco-adhesive film formulations containing bupivacaine hydrochloride and triclosan as poorly-soluble model drugs. The film formulations were characterized in terms of swelling, mucoadhesion and in vitro drug relea...

The use of injectable local anaesthetics for the treatment of severe postoperative pain is limited by the short duration of the painkilling effect. Pre-formulation studies were carried out for the development of an injectable microparticle formulation for controlled release of prilocaine, an amino-amide type local anaesthetic suitable for intraveno...

A novel mucoadhesive buccal patch formulation of triclosan (TR), a broad spectrum antibacterial agent, was developed using low methoxy amidated pectin (AMP). The integrity of AMP matrix was improved by addition of 20% (w/w) Carbopol (CAR). The efficiency of β-cyclodextrin-epichlorohydrin polymer (EPIβCD) and anionic carboxymethylated β-cyclodextrin...

ABSTRACT - Purpose. The aim of the present work was the development and characterization of a niosomal formulation functionalized with the glucose-derivative N-palmitoylglucosamine (NPG) to obtain a potential brain targeted delivery system for the anticancer agent doxorubicin. Methods. Five different methods have been examined for vesicle preparati...

Topical administration of celecoxib proved to be an effective mean of preventing skin cancer development and improving anticancer drugs effectiveness in skin tumors treatment. The aim of this study was the development of an effective topical formulation of celecoxib, able to promote drug skin delivery, providing its in depth penetration through the...

Pectinate-chitosan-beads aimed for colon theophylline delivery have been developed. The effect of zinc or calcium ions as cross-linking agent, and of chitosan concentration on the properties and colon-targeting performance of beads was investigated. Beads were characterized for morphology, entrapment efficiency and mucoadhesion properties. Zn-pecti...

The aim of the present work was to develop a new multiparticulate system, designed for colon-specific delivery of celecoxib for both systemic (in chronotherapic treatment of arthritis) and local (in prophylaxis of colon carcinogenesis) therapy. The system simultaneously benefits from ternary complexation with hydroxypropyl-β-cyclodextrin and PVP (p...

A new delivery system based on drug cyclodextrin (Cd) complexation and loading into nanostructured lipid carriers (NLC) has been developed to improve ketoprofen therapeutic efficacy. The proposed strategy exploits both the solubilizing and stabilizing properties of Cds and the prolonged release, high tolerability and percutaneous absorption enhance...

Microemulsion formulations represent an interesting delivery vehicle for lipophilic drugs, allowing for improving their solubility and dissolution properties. This work developed effective microemulsion formulations using glyburide (a very poorly-water-soluble hypoglycaemic agent) as a model drug. First, the area of stable microemulsion (ME) format...

Interaction in solution and in the solid state of triclosan (TR), a practically water-insoluble antimicrobial agent, with parent β-cyclodextrin (βCD) and its water-soluble epichlorohydrin polymer (EPI-βCD) was investigated by several analytical techniques, to evaluate the role of the carrier features on the physicochemical properties of the drug-cy...

The effect of the combined use of randomly methylated β-cyclodextrin (RAMEB), chitosan (CS), and bile components (dehydrocholic (DHCA) or ursodeoxycholic (UDCA) acids and their sodium salts) on solubility and permeability through Caco-2 cells of oxaprozin (a very poorly water-soluble non-steroidal anti-inflammatory drug) has been investigated. Addi...

Interaction products of prilocaine hydrochloride (PRL), a local anesthetic agent highly soluble in water, with triacetyl-β-cyclodextrin (TAβCD), a hydrophobic CD derivative practically insoluble in water, were prepared to estimate their suitability for the development of a prolonged-release dosage form of the drug. Equimolar PRL-TAβCD solid systems...

A combined strategy, based on cyclodextrin complexation and loading in liposomes, has been investigated to develop a new delivery system with improved therapeutic activity of the local anesthetic, prilocaine (PRL). In order to evaluate the actual effectiveness and advantages of this approach compared to the traditional drug-in-liposome one, four di...

A novel method, which simultaneously exploits experimental (NMR) and theoretically calculated data obtained by a molecular modelling technique, was proposed, to obtain deeper insight into inclusion geometry and possible stereoselective binding of bupivacaine hydrochloride with selected cyclodextrin derivatives. Sulphobuthylether-β-cyclodextrin and...

An adequate drug dissolution behavior is essential for the therapeutic effectiveness of all solid dosage forms. To develop a new solid self-micro-emulsifying drug delivery system (S-SMEDDS) to improve the dissolution properties of poorly water-soluble drugs, such as glyburide. Liquid self-micro-emulsifying drug delivery systems (SMEDDS) consisted o...

A combined approach based on drug cyclodextrin (CD) complexation and loading into PLGA nanoparticles (NP) has been developed to improve oxaprozin therapeutic efficiency. This strategy exploits the solubilizing and stabilizing properties of CDs and the prolonged-release and targeting properties of PLGA NPs. Drug-loaded NPs, prepared by double-emulsi...

The combined approach of cyclodextrin complexation and entrapment in liposomes was investigated to develop a topical formulation of local anaesthetics. For both benzocaine (BZC) and butamben (BTM), hydroxypropyl-beta-cyclodextrin (HPbetaCD) was a better partner than betaCD; drug-HPbetaCD coevaporated products showed the best solubility and dissolut...

A new mucoadhesive film for topical administration in the oral cavity of flufenamic acid, a poorly soluble anti-inflammatory drug, has been developed, using complexation with hydroxypropyl-beta-cyclodextrin (HPbetaCD) to improve drug dissolution and release rate. Buccal films were prepared utilising chitosan as mucoadhesive polymer, KollicoatIR as...

This study aimed to investigate the influence of the preparation conditions on the performance of an ethosomal formulation for topical delivery of the local anesthetic agent, benzocaine (BZC). Ethosomes were prepared with different techniques, such as thin-layer evaporation, freezing and thawing, reverse-phase evaporation, extrusion and sonication,...

Binary products of bupivacaine hydrochloride (BVP HCl), an amide type local anesthetic, with parent beta-cyclodextrin (beta-CD) and its soluble beta-cyclodextrin-epichlorohydrin polymer (EPI-beta-CD) were prepared and evaluated as a first phase in the development of a novel mucoadhesive formulation aimed for buccal delivery of this drug. The solid...

Binary and ternary interaction products of ketoprofen (an anti-inflammatory drug very poorly water soluble) with phospholipids (phosphatidylcholine (EPC3) and phosphatidylglycerol (EPG)) and cyclodextrins (beta-cyclodextrin and its methylated derivative (MebetaCd)), were prepared to evaluate their ability in improving drug dissolution properties. T...

The aim of this work was to assess the effectiveness and actual advantages of the microwave (MW) technology for preparing ternary complexes of ketoprofen (Keto) with beta-cyclodextrin (beta-Cd) or methylated-beta-cyclodextrin (Mebeta-Cd) and phosphatidylcholine (EPC3) with respect to conventional preparation methods, such as co-grinding and sealed-...

This study describes the application of a multi-varied experimental design methodology to the optimization of a bead formulation based on a mixed network of Ca pectinate and chitosan. The effect of varying the relative percent of the three components used for the bead production, i.e. pectin, chitosan and CaCl2, has been systematically investigated...

Abstract Microcapsules containing aminophylline cores in ethylcellulose walls have been prepared and tableted. The mechanical properties and the release characteristics of tablets obtained by direct compression at six different pressures (ranging from 265 to 1060 Kg.cm−2) were studied. The release rate of the drug from tableted microcapsules increa...

Abstract Ways of finding kinetic parameters useful for pharmaceutical formulators from thermal analytical methods (TGA, DSC) under both isothermal and non-isothermal conditions are suggested. We considered as an example those followed to determine the first-order kinetics of dehydration of cross-linked polyvinylpyrrolidone (PVP XL). PVP XL samples...

Abstract The stability of commercially-available solid pharmaceutical preparations containing cephaloridine and cefazolin sodium was evaluated with an accelerated isothermal degradation method at three different temperatures (37°, 45° and 60°C). A specific and sensitive differential pulse polarographic method was used for cephalosporin determinatio...