Mustafa E. Üreyen

Mustafa E. Üreyen
ResearchGate | RG

PhD

About

73
Publications
31,093
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
540
Citations
Citations since 2016
47 Research Items
378 Citations
2016201720182019202020212022020406080100
2016201720182019202020212022020406080100
2016201720182019202020212022020406080100
2016201720182019202020212022020406080100
Additional affiliations
May 2018 - present
Eskisehir Technical University, Eskisehir
Position
  • Dr
September 2007 - present
Anadolu University
September 1996 - October 2007
Ege University
Position
  • Research and Teaching Assistant

Publications

Publications (73)
Conference Paper
In this study, polyvinyl alcohol (PVA) fibres were melt-spun to evaluate their potential as medical textiles. In fibre spinning, silver doped calcium phosphate-based inorganic powder (Ag1) was used as the antimicrobial additive. The powder was synthesized using a wet chemical manufacturing method. The polymer and antimicrobial additive were melt-mi...
Article
Polyethylene (PE) has high flammability and can be quickly burned under atmospheric conditions without leaving any residues. This study presents PE fibers produced by a novel modified melt spinning line to enhance mechanical and flame retardancy properties. Scanning electron microscopy equipped with energy dispersive X-ray, thermogravimetric analys...
Article
Full-text available
Polyvinyl chloride (PVC) is used as an insulator in cable production. In order to enhance its thermal stability and flame retardant properties various chemicals have been added to PVC. In this study, hexagonal boron nitride (BN) and colemanite (C) at different concentrations were added to PVC to prepare composites by melt compounding method. The ef...
Conference Paper
Yangınların sebep olduğu can ve mal kayıplarını en aza indirgeyebilmek için alev geciktiricilerin kullanımı zaruri hale gelmiştir.1 Günümüzde kullanılan polimerlerin pek çoğunun aleve karşı dirençleri zayıftır ve kolay tutuşabilirler. Bu sebepten dolayı polimer esaslı malzemelerin de ısıl dirençlerini artırmak için alev geciktirici katkı maddeleri...
Article
Full-text available
The flame-retardant glass fiber reinforced epoxy composites have been examined for the aviation and defense industry recently. The fire risks and fire hazards on the environment and human health must be taken into consideration in the case flame-retardant usage when improving their thermal performance. In this study, the flame-retardant glass fiber...
Article
Full-text available
Canlılar milyonlarca yıl boyunca aşırı çevresel etkilere karşı koyacak veya adapte olacak çok özel yapılar ve davranışlar geliştirmiştir. Bu nedenle insanoğlu varoluşundan itibaren bunların gizemlerini çözmeye çalışmış ve kendisine örnek olarak almıştır. Doğadaki gelişmiş sistemler yenilikçilik, verimlilik ve sürdürülebilirlik açılarından insanlığa...
Article
Full-text available
Wool and wool-polyamide blended yarns (88.6% wool–11.4% polyamide 6,6 and 78.5% wool–21.5% polyamide 6,6) were knitted and the produced fabrics were treated by exhaustion method with zirconium complexes. Six different baths containing potassium hexafluorozirconate and zirconium acetate were studied. The flammability hazard was evaluated considering...
Article
Full-text available
Wool(WO) is often blended with polyamide 6.6(PA) at certain ratios in order to obtain fabrics with superior comfort and mechanical features. These type of wool rich upholstery fabrics are commonly preferred in aircraft seats. Flammability is an important characteristic of aircraft materials in terms of safety and regulatory purposes and it is highl...
Conference Paper
The ease-of processing, low cost, excellent resistance to chemicals and lightweight features of polypropylene (PP) have led to a wide range of end uses. The injection moulded products is the major field in terms of PP consumption and is followed by the textiles which account for the 23% of the global consumption. Though polypropylene is widely used...
Article
The use of flame retardants (FRs) to improve the flame retardancy but also having good insulation and mechanical properties of rigid polyurethane foam (RPUF) has become significant due to the increasing demand in both the industry and academia. In the present study, a series of RPUF composites containing expandable graphite (EG), ammonium pentabora...
Article
Wool and wool/nylon blended yarns were knitted and treated by a phosphorus sulphur based agent by padding. The flammability hazard was evaluated considering parameters such as; the spread of flame, heat release and smoke emission. The flame spread of fabrics was measured according to the FAR/CS 25.853 12 Second Vertical Bunsen Burner test procedure...
Article
Full-text available
Polimer esaslı (plastik) malzemelerin 1950’li yıllardan bu yana hayatın her alanında gittikçe artan bir oranda kullanım alanı bulmaktadır. Polipropilen (PP), poliolefin grubunda yer alan ve oldukça yaygın kullanılan termoplastik polimerlerden birisidir. PP’den elde edilen ürünler paketleme ve ambalaj sektöründe, otomotiv uygulamalarında, elektrik v...
Article
In this study, an N‐alkoxy‐hindered amine‐based UV stabilizing agent (NOR‐116) and nanosized silica particles (Aerosil R‐972) were combined with a cyclic phosphonate based‐flame retardant (FR; PCO‐900) and incorporated into polypropylene via melt extrusion in a microcompounder. In order to stimulate the conditions in the favor of further processing...
Article
Full-text available
The effects of multi-walled carbon nanotubes (MWCNTs) on fire behavior of phosphorus-based flame retardant (PBFR)/polypropylene (PP) were investigated. Two different type phosphorus-based flame retardant that commercially available; ammonium polyphosphate-based (Exolit AP 760) and organic phosphorous-based (Aflammit PCO 900) powders were studied to...
Article
Full-text available
Zinc borate (ZnB) has been used as a flame retardant, a smoke suppressant, and an antitracking agent in several applications. It may show synergistic effects with antimony oxide and metal hydroxides in fire retardant systems. In this work, the effect of ZnB on the flame retardancy of PET (poly(ethylene terephthalate)) woven fabrics was investigated...
Article
Full-text available
Rigid polyurethane foam (RPUF) composites with triphenyl phosphate (TPhP), aluminum trihydrate (ATH), and zinc borate (ZnB) alone, as well as their binary blends, were prepared via a one‐shot process. The amount of flame retardant (FR) or FR blend was varied from 10 to 50% by polyol weight percentage, and the weight fraction of the blends was also...
Article
Full-text available
Günümüzde teknolojik gelişmelerin tekstil ve moda endüstrisi üzerinde güçlü bir etkisi vardır. Malzeme alanında en ileri seviyeyi temsil eden ürün grubu akıllı malzemelerdir. Temelde uzay, askeri, tıbbi ve spor amaçlı geliştirilen akıllı malzemeler pek çok farklı alanda olduğu gibi tekstil ve giysilere de uyarlanmıştır. Akıllı tekstiller ve giysile...
Article
Full-text available
Wool and polyamide blended fabrics are widely preferred for aircraft seats. Due to the requirements of the flammability regulations of airline authorities, aircraft fabrics have to pass vertical flammability and smoke density tests. In this work, polyamide/wool blended yarns produced in five different ratios. Yarn samples were knitted on a circular...
Conference Paper
Sert poliüretan köpük (SPK) mükemmel ısı yalıtım kapasitesinden dolayı piyasadaki en iyi izolasyon malzemelerinden biridir. SPK’lar hem yüksek ısı yalıtım kapasiteleri hem de mekanik mukavemetlerinden dolayı buzdolaplarının en önemli bileşenlerinden biridir [1]. Bu mükemmel özelliklerine rağmen SPK’lar, organik karakterlerinden ve içerisinde yanıcı...
Conference Paper
Full-text available
Teknolojik gelişmelere paralel olarak hemen her alanda olduğu gibi tekstil ve moda tasarımında da tasarım yazılımlarının kullanımı artmıştır. Tekstil ve moda endüstrisinde bilgisayar teknolojilerinin mevcut uygulama alanları arasında dokuma, örme, baskı, ve nakış tasarımı, moda illüstrasyonu oluşturma, doku haritalama, desen yapımı, desen derecelen...
Conference Paper
Full-text available
This work aims at investigating the thermo-oxidative degradation and combustibility of wool(WO)-polyamide(PA) blends. Yarns of 100%WO, 90% WO-10% PA and 80% WO-20%PA were scoured using a non-ionic detergent and the composition of yarns was determined according to TS1700. Simultaneous thermal analysis of yarns were carried out at various heating rat...
Article
Full-text available
Özet: Bu çalışmada; farklı kütlesel oranlarda yumurta kabuğu tozu (YKT) içeren sert poliüretan köpük kompozitler (SPKK) sentezlenmiştir. YKT, X-ışını kırınım difraktometresi (XRD), X-ışını floresans spektrometresi (XRF) ve Fourier dönüşümlü infrared spektrofotometresi (FTIR) kullanılarak karakterize edilmiştir. Köpüklerin yüzey morfolojileri tarama...
Conference Paper
The present study aims at investigating the effect of multi-walled carbon nanotubes (MW-CNT) and nano silica particles on fire behaviour of ammonium polyphosphate-based intumescent flame retardant(IFR)/polypropylene (PP) system by using limit oxygen index test and thermal analysis.
Conference Paper
Full-text available
The major steps of mass loss were identified by thermogravimetric analysis. Kinetics of thermal degradation of yarns were studied within these regions by IKP method. The gases evolved by the decomposition of 100%WO, 90% WO-10% PA and 80% WO-20%PA were analyzed at various temperatures.
Article
In this study, rigid polyurethane foam composites (SPKK's) containing egg shell powder (YKT) with different ratio were synthesized. YKT was characterized by using X-ray difractometer (XRD), X-ray fluorescence spectrometer (XRF) and Fourier transform infrared spectrophotometer (FTIR). The surface morphology, closed cell ratio and density, thermal co...
Conference Paper
Full-text available
Nowadays, thermochromic dyes, as an example of smart textile materials, have an important role and potential in textile applications. In this work three different colours of thermochromic dyes were applied alone and with reactive printing dyes to cotton and PES fabric samples by screen printing. Firstly, effect of process parameters and application...
Conference Paper
Wool fibre exhibit low flammability due to its distinctive chemical features such as; low content of hydrogen (6-7%), high content of elemental nitrogen (15-16%) and sulphur (3-4%), high moisture regain (15%). Wool and its blends have a variety of end-uses in aircraft cabins, e.g.; upholstery, floor coverings etc. Intrinsic flame retardancy of wool...
Poster
Full-text available
The objective of this research was to produce rigid polyurethane foam composites possessing improved flame retardant properties besides both thermal insulation (with low thermal conductivity) and mechanical (with high compression strength) properties.
Article
The effects of sepiolite on fire behavior of ammo-nium polyphosphate-based intumescent flame retardant (IFR)/polypropylene (PP) were investigated. The disaggrega-tion of sepiolite bundles has been provided by wet-milling as the zeta potential value decreased from − 9.6 to − 31.3 mV. PP and additives were compounded by a twin-screw extruder and mold...
Article
Full-text available
In this work effect of using hollow yarns on the permeability properties of the single jersey knitted fabrics were studied. Firstly yarns were produced by ring spinning machine using cotton, viscose and acrylic fibres in the mantle and water soluble polyvinyl alcohol (PVA) fibre in the core. Single jersey fabrics were knitted and PVA core was remov...
Article
Full-text available
Neat poly(butylene terephthalate) is highly combustible. It is not self-extinguishing, and after ignition it burns with dripping. To meet the fire safety requirements, it should be rendered flame retardant. The most common flame retardants for PBT are based on halogenated (most often brominated) or phosphorus compounds. Although their efficiency is...
Article
Silver compounds have extensive use among the antimicrobial agents in textiles. Silver particles are released into the water during washing processes in particular and they are released from the textile in time due to use. In this work, silver ion release from cotton and polyester antimicrobial fabrics which are the most widely used textiles have b...
Article
Textile scientists make researches for producing new types of fibers as well as modifying the existing fibers to provide new raw materials for technical textile applications. The easiest way of modifying fiber physical properties is to change the cross sectional shape of a synthetic fiber. Also, composite fibers loaded with different kinds of addit...
Thesis
Günümüzde teknolojinin çok hızlı ilerlemesi mühendislik ve tasarım alanlarına yönelik gelişmiş yazılımların ortaya çıkmasına olanak sağlamıştır. Bilgisayar Destekli Tasarım (CAD) programları olarak bilinen bu yazılımlar pek çok sektör tarafından yoğun şekilde kullanılmaktadır. Tekstil ve giysi tasarımına yönelik olarak da pek çok yazılım geliştiril...
Article
Full-text available
In the scope of this work, determination of the parameters that affect permeability properties and the proposition of fabric structures designed for the needs of different sports are aimed by measuring permeability properties of fabrics used in the field of sports clothing. In this context, 11 different fabric structures that are used primarily in...
Article
Full-text available
Clothes are used to maintain and protect body temperature. In order to balance high heat that surrounds body, garment permits sweat to evaporate (cooling off by perspiration). When humans are under high temperatures or do physical exercise, the fluctuation of fabric during movement creates air streams, which increase perspiration and cooling off. B...
Conference Paper
CAD systems promise considerably cost saving to user in the field of materials, time, energy and labour. There are several successful 2D and 3D design software developed for facilitating users‟ work in every step of production process which begins from yarn to finished product design and until even marketing stage. In this work some woven fabric an...
Article
Full-text available
Objective: This study aimed to define the prevalence and predictors for pseudoaneurysm after coronary angiography, cardiac catheterization and percutaneous coronary interventions (PCIs) performed via the femoral artery. Methods: The study included 8469 patients enrolled between January 2007 and December 2009 on whom cardiac catheterization, coro...
Poster
Full-text available
Ever developing computer and production technologies have influenced the textiles and fashion industries. In the clothing industry CAD systems are mainly used in pattern preparation, pattern grading, garment design and so on. Shape analysis and viewing of the model from any direction and distance are also possible by modern 3D systems. In this work...
Article
Textiles are suitable materials for the growth of pathogenic microorganisms. Therefore, various antibacterial finishes have already been developed for textile products. In this work an antibacterial finishing agent containing calcium phosphate-based silver-doped powder was developed for the functionalization of textiles and applied to 100% cotton a...
Article
In our previous works, we had predicted cotton ring yarn properties from the fiber properties successfully by regression and ANN models. In this study both regression and artificial neural network has been applied for the prediction of the bursting strength and air permeability of single jersey knitted fabrics. Fiber properties measured by HVI inst...
Article
Full-text available
The aims of this work were to analyze the antibacterial activity and laundering durability of the silver loaded cellulosic fiber/cotton blended antibacterial textile fabrics, to quantify the silver content present in fabrics, and to examine the relationship between the antibacterial activity and silver content. For this aims knitting fabrics consis...
Conference Paper
Full-text available
In this study, the effects of yarn parameters, on the bursting strength of the plain knitted fabrics were examined with the help of artificial neural networks. In order to obtain yarns having different properties such as tenacity, elongation, unevenness, the yarns were produced from six different types of cotton. In addition to cotton type, yarns w...
Article
The effects of commercial antibacterial finishing agent application on the physical properties of cotton fabrics, including laundering durability, were investigated. Applications were performed by the pad-dry-cure method. All fabric samples were washed 40 times. The physical properties (i.e., fabric weight, pilling, burst¬ing strength, air permeabi...
Article
The effects of commercial antibacterial finishing agent application on the physical properties of cotton fabrics, including laundering durability, were investigated. Applications were performed by the pad-dry-cure method. All fabric samples were washed 40 times. The physical properties (i.e., fabric weight, pilling, bursting strength, air permeabil...
Article
Full-text available
Microorganisms can lead to functional, hygienic and aesthetic (e. g. deterioration, staining) problems on textile products. Natural fibers especially cotton are more easily affected by microorganisms. Blending of cotton fibers with antimicrobial fibers can enhance the protective properties of products against microorganisms. Demand of antimicrobial...
Article
Full-text available
With the newly developed ITV snarling behavior testing instrument presented here, it has become possible for the first time to carry out extensive tests, that are statistically significant regarding to the snarling behavior of yarns. In additional tests still to be carried out, the influence of different yarn parameters on the snarling behavior wil...
Article
With the new ITV torquing tester, it is possible for the first time to make extensive tests on torquing, with minimal effort and statistically secured validity. In further tests the influence of different yarn parameter on torquing was analyzed. An important test describes the evaluation of the influence of steaming on torquing. It is possible to o...
Article
In this study artificial neural network (ANN) models have been designed to predict the ring cotton yarn properties from the fiber properties measured on HVI (high volume instrument) system and the performance of ANN models have been compared with our previous statistical models based on regression analysis. Yarn count, twist and roving properties w...
Article
The objective of this second part of the study is to develop artificial neural network models for the prediction of yarn hairiness and unevenness and to compare the performance of ANN models with our previous statistical models based on regression analysis. Besides HVI properties, yarn count, twist and roving properties were also selected as input...
Article
Full-text available
In this work interactions between ring yarn properties and cotton fibre properties were investigated by using partial correlation analysis. On experimental part, a total of 180 different ring yarns were produced from 15 different cotton blends on the same ring spinning machine under the same conditions at Ege University Textile and Apparel Research...
Article
Full-text available
In this paper some models for predicting the most important ring yarn quality characteristics were built by using AFIS (Advanced Fibre Information System) data. Yarn count, twist and roving properties were also selected as predictors because of their great effect on the yarn properties. A total of 180 ring yarns were produced from 15 different cott...
Article
Full-text available
In this paper some models for predicting the most important ring yarn quality characteristics were built by using AFIS (Advanced Fibre Information System) data. Yarn count, twist and roving properties were also selected as predictors because of their great effect on the yarn properties. A total of 180 ring yarns were produced from 15 different cott...
Article
By using sirospun process, a spin-twisted yarn can be produced directly on the ring- spinning machine. Two rovings are led paralel through the drafting system and then separated by two special condensers and drafted separately. When compared with a single yarn with same yarn count, sirospun yarn is better in hairiness, strength and abrasion resista...
Article
The main aim of the present study was to predict the most important yarn quality characteristics derived from cotton fiber properties that were measured by means of an HVI system. With this aim 15 different cotton blends were selected from different spinning mills in Turkey. The cotton fibers were processed in the short staple spinning line at Ege...
Conference Paper
The advantages of compact spinning with respect to yarn quality are studied. These include a reduction in yarn hairiness in both long-staple and short-staple yarns and some improvement in yarn strength and breaking elongation. Mill experience shows that ends down in spinning is reduced by a minimum of 20% and winding speed can be increased because...
Article
Full-text available
ZET Pamuk lifinin ülkemiz için ayrı bir önemi bulunmaktadır. Ülkemiz Dünya'nın en önemli pamuk lifi ve pamuk ipliği üreticilerinden birisidir. Çırçır işlemi ile pamuk lifleri çekirdeklerinden ayrılarak iplik eğirmeye hazır hale getirilmektedir. Türkiye'de yaygın olarak kullanılan sistem Rollergin sistemidir. Pamuk tarımı, pamuk cinsleri, iplik eğir...

Network

Cited By