Muhammad Ary Murti

• Telkom University

This article opens the series of ten interviews with the Officers of the IEEE ComSoc Member and Global Activities (MGA) Council for the term 2024–2025, which will be published every month in the Global Communications Newsletter.

Earthquake is one of the natural disasters that have a big impact on society. Currently, there are many studies on earthquake detection. However, the vibrations that were detected by sensors were not only vibrations caused by the earthquake, but also other vibrations. Therefore, this study proposed an earthquake multi-classification detection with...

Currently, electrical energy is one of the primary needs in everyday life. Almost every device used for daily life uses electric power. However, the lack of user awareness in electronic devices can cause monthly electricity bills to be out of control, both in-office and residential areas. To improve the efficiency of electrical energy use in office...

Water quality status in terms of one crucial parameter such as dissolved oxygen (D.O.) has been an important concern in the Fei-Tsui reservoir for decades since it’s the primary water source for Taipei City. Therefore, this study aims to develop a reliable prediction model to predict D.O. in the Fei-Tsui reservoir for better water quality monitorin...

Smart city implementation, such as smart energy and utilities, smart mobility & transportation, smart environment, and smart living in urban areas is expanding rapidly worldwide. However, one of the biggest challenges that need to be solved is the selection of the appropriate internet of things (IoT) connectivity technologies. This research will se...

As a country located among three major tectonic plate confluences, namely the Eurasian Plate, the Indo-Australian Plate, and the Pacific Plate, Indonesia is an earthquake-prone area. Information about the earthquake occurrences is distributed by the BMKG through social media, websites and television. However, it is undeniable that there are still p...

Earthquake is one of the devastating and frightening natural disasters that caused big casualties in a small duration. Earthquake caused lots of damage in just a few minutes and the casualties of the earthquake increase as the population increase which also contribute to higher amount of property and buildings. Therefore, by developing model capabl...

Earthquakes have been universally recognised as seismological disasters that pose a threat to civilization and need to be monitored through prediction models. The development and usage of traditional statistical predicting models, which require the understanding of underlying physical scientific processes in a system and large amounts of data prepa...

Penggunaan listrik untuk beban besar seperti gedung dan industri adalah sistem kelistrikan 3 fasa. Kegiatan pencatatan atau pemantauan data penggunaan listrik secara manual dinilai kurang praktis, sehingga penggunaan perangkat IoT dapat menjadi solusinya. Namun pengiriman data pada perangkat IoT dengan menggunakan komunikasi kabel dan Wi-Fi dinilai...

Data of number of people in the room, calculations are usually carried out by assigning someone to oversee a room. In this final project, a system for calculating the number of people in the room is designed with image processing based on human detection that can be used in rooms, both for commercial applications and for security. This system uses...

Indonesia is a country that is very prone to earthquake. This disaster can have a very large impact from main destruction of ground motion and secondary destruction from building rupture. By providing early warning system, secondary disasters caused by the earthquake, such as fire due to gas leakage, electric shock or loss of important personal dat...

The increase in population every year makes more and more owners of motorized vehicles and cars resulting in full access to the highway, not only the highway that experiences density while the bridge is one of the factors of density due to the number of motorized vehicles and cars that pass not only at a certain time the bridge will be congested an...

Because of technology development, the needs for energy are increasing. Earth provide energy source by means of oil, gas and coal, buried beneath ground soil. A tool that can detect soil structure and material before drilling is needed. Each material has a different density; the difference in density produces a back effect. Geophones can be used to...

The manual reading of electricity, water, gas, and fuel tank meters requires increased fieldwork efficiency and improved measurement accuracy and monitoring related to service users and reducing fraud potential. The implementation of measurement services needs to be supported by communication technology, which has low cost and reliability character...

Water quality has a crucial impact on human health; therefore, water quality index modeling is one of the challenging issues in the water sector. The accurate prediction of water quality index is an essential requisite for water quality management, human health, public consumption, and domestic uses. A comprehensive review as an initial attempt is...

Autonomous robot adalah suatu robot yang mampu bekerja secara mandiri tanpa pengendalian langsung dari manusia. Robot bekerja berdasarkan sensor-sensor yang dimilikinya, mengambil keputusan sendiri untuk menyelesaikan misi dalam lingkungan kerjanya. Dalam dunia nyata, lingkungan kerja robot sangat dinamis, selalu berubah, dan tidak terstruktur. Mem...

Data security is one of many problems that we face in IoT implementation. One of the problems with data security is we cannot assure that the data we received in the server-side is truly our data that we send from client-side or sensor-side. With that problems, comes some solutions like encryption and decryption method or some basic authentication...

This paper reports the recent updates of Prevention and Recovery Networks for Indonesia Natural Disasters based on the Internet-of-Things (PATRIOT-Net) for the first year of total three years. The PATRIOT-Net project is targeting on 7 outcomes: (i) optimal high dense internet of things (IoT) networks, (ii) network coding algorithm for heterogeneous...

This paper reports the recent updates on Zigzag decodable codes-based Raptor coding for active safety transportation (ZEBRA-CODES) for the first year of total three years. This project is targeting: (1) a decoding schemes ZEBRA-CODES, (2) optimal degree distribution for Raptor coding for transportation, and (3) New modulation scheme suitable for mu...

Delay and dropout are important parameters influence overall control performance in Networked Control System (NCS). The goal of this research is to find a model of delay and dropout of data communication link in the NCS. Experiments have been done in this research to a water level control of boiler tank as part of the NCS based on internet communic...

Pattern recognition will be powerful if the preprocessing process can perfectly transform gray image to binary. This binary image that contains the desired object pattern is very helpful in feature extraction to get the unique feature. This paper proposes an edge detection algorithm to get the object pattern. Algorithm's output is in binary image....

Marker method is an algorithm to count passing objects. We test cars as the object and take the video on the highway. The results show an accuracy of 91.43%. Error appears due to imperfect binary images.

We propose an algorithm in ideal case to count a passing object based on video signal processing. The procedure is very simple. The object is tracked whether it has already passed the marker (a virtual line) and made the recording of leftborder (edge of object that will firstly cross the marker) position change. If the object has passed the marker,...

Distinguishing the quality of wood is required in industry as one of quality controls. This process needs image processing technique to realize automation by a computer. This paper presents the detection of first and second quality from slant fiber wood. In feature extraction, we use only 2 feature values, namely, fibernumber (the number of fibers...

The increasing number of attacks on computer networks has caused network securities were an important issue since the first network security breaches were discovered in 1980. Currently, the pattern of network attacks becomes more sophisticated and lead to difficulty in detecting the attacks. Failure to prevent the attacks makes privacy, data, and o...

It is important in image processing to extract objects from their background into binary image. Binary image is used as input to feature extraction process and have an important role in generating unique feature to distinguish several classes in pattern recognition. This paper proposes an image processing algorithm to obtain a binary image from RGB...

Delay and dropout are important parameters in Networked Control System (NCS). They influence to overall control system performance. The characteristic of delay and dropout that occur in the network should be considered on NCS implementation. Global System for Mobile (GSM) technology is advantage alternative on wide coverage and easy deployment to p...

We propose an algorithm to separate black object in binary image. The algorithm is designed to perform vertical separation first, then followed with horizontal separation. This process is done only once (one layer). Results showed that the algorithm potentially could be developed into n-layer separation in a recursive function. The algorithm also p...

Quality control is one of important process that can not be avoided in industry. Image processing technique is required to distinguish the quality of wood. If it can be done automatically by the computer, it will be very helpful. This paper discusses the detection of straight and slant wood fiber to distinguish it’s quality. This paper propose an a...

In this paper, we propose the implementation of PID on Networked Control System (NCS) using Particle Swarm Optimization (PSO) algorithm as tuning method. There are three modification of PSO that used in this paper. The first is Constant Inertia Weight of PSO (CIW-PSO), the second is Linear Difference Weight of PSO (LDW-PSO), and the latest is Rando...

M2M (Machine to Machine) communication system allows a number of machines in one area connected to internet through one gateway. In the large plant system in which data to be delivered might be exceed one data package. The data must divide into several subdivision data packages. As a result, system will experience multi-delay and also multi-dropout...

Nanosatellite is one type of artificial satellites are relatively small and lightweight mass, between 1 kg - 10 kg. Nanosatellite can be programmed to perform shared mission, one of which is for remote sensing. Remote sensing can be used for many purposes like to learn growth of a region, to create maps, to check weather condition, astronomy monito...

This paper presents the implementation of networked control systems (NCS) to be applied in industrial automation by using the programmable controller as the platform controller based Ethernet network. The fast growing in ICT technology on recent era brings some essential progress to support the development of NCS becomes more reliable to be impleme...

1xEV-DO is a 3rd generation CDMA/TDM hybrid system that provides high speed data service. Having bandwidth of 1.25 MHz, lxEV-DO could support data rate of up to 2.4576 Mbps in forward link. Multimedia data transmission through CDMA 2000 1x EV-DO network is prone to errors. Therefore, rate control system is necessary in order to manage data rate acc...

ABSTRAKSI Saat ini, masih sedikit instrument untuk mengukur nilai induktor L dan capasitor C di laboratorium elektronika STTTelkom.Hal ini yang menjadi dasar ide untuk mendesain dan mengimplementasikan alat ukur berbasis PC ini, dimana komponen induktor dan capasitor banyak sekali penggunaannya dalam praktikum-praktikum elektronika, sehingga diperl...

Pada paper iniakandipaparkan tentang penggunaanteknologiBluetooth untuk mengendalikan berbagai perangkat rumahtangga. Sistem yang dibangunterdiri dari handphone denganfasilitas Bluetooth sebagai pengendali, handphone denganfasilitas Bluetoothsebagai penerima yang terhubung dengan sebuah PC sebagai server, dan perangkat berbasis mikrokontroller yan...

ABSTRAK Optimalisasi dan efisiensi proses produksi dalam manufaktur merupakan faktor yang sangat penting, terutama untuk menghasilkan barang yang berkualitas dengan proses produksi yang tepat waktu sesuai dengan keinginan konsumen atau buyer. Oleh karena itu diperlukan suatu upaya untuk mengimplementasikannya melalui penggunaan rancangan sistem kom...

1 vespa_rini@yahoo.co.id, 2 hrw@ittelkom.ac.id, 2 mam@ittelkom.ac.id ABSTRAK Loran (Long Range Navigation) merupakan sistem radio terestrial yang memanfaatkan sifat perambatan gelombang radio di atas permukaan bumi (ground wave). Sistem navigasi Loran-C bekerja pada rentang frekuensi 80 KHz sampai dengan 100 KHz. Satu sistem Loran, terdiri dari beb...