About
163
Publications
44,613
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
667
Citations
Introduction
Publications
Publications (163)
The rapid growth of electric vehicle production has led to increased waste batteries that can no longer be used. This increase causes environmental and economic challenges. Lithium-ion battery waste harms the environment as it contains toxic and flammable chemicals. New raw materials need to be procured economically due to the need for more infrastr...
This study examines the gap between industry expectations in Indonesia and the current competencies of undergraduate Industrial Engineering students at Universitas Sebelas Maret. The findings of this study can serve as a guideline for improving the existing Industrial Engineering program at Universitas Sebelas Maret. The research employs web scrapi...
Several strategies and attempts have been made to accelerate the transition from internal combustion engines (ICE) to electric vehicles (EVs). This acceleration also has implications for the increasing swap battery waste on electric motorcycles. End-of-life (EoL) swap batteries on electric motorcycles have reached the end of their useful life in la...
Pengabdian kepada Masyarakat (PkM) berlokasi di Kabupaten Magetan, Jawa Timur, wilayah yang memiliki potensi Energi Baru Terbarukan (EBT) yang melimpah dan memiliki rencana investasi pada bidang elektrifikasi. Namun, adopsi-difusi teknologi elektrifikasi dan EBT dari masyarakat masih rendah, diantaranya dapat ditunjukan dengan rendahnya pemanfaatan...
The number of motorcycles in Indonesia has significantly increased. According to BPS, by the end of 2022, there will be approximately 125.3 million motorcycle units in Indonesia. During the period from 2012 to 2022, the number of motorcycles in Indonesia increased by about 48.9 million units, or a growth of 64 percent. Automatically, this will cont...
Procurement of machinery is a facilitation to overcome auction problems in accordance with the strategic plan of the Dinas TPHPKP to maintain and improve the quality or quality of commodities so as to increase the selling value. To carry out this facilitation with limited funds, other sources of subsidized funds are needed, the government needs too...
Startups often offer innovations in solving problems, but if these innovations have a business model, they will be protected from entering the valley of death. Polimikro Berdikari Nusantara is one of the startups recently facing risk. Polimikro Berdikari Nusantara’s main product, Lithium Nickel Manganese Cobalt Oxide (NMC), had Technological Readin...
In various cocoa-producing nations, cocoa stands as a vital commodity, serving as the generates significant waste in the form of husks, which could potentially be repurposed into organic fertilizers. Unfortunately, most existing studies on cocoa supply chains overlook the management of cocoa waste through a closed-loop supply chain (CLSC) framework...
This case study discusses a work facility design project in a leather bag craft business in Magetan. Magetan leather craft has great potential to become the largest leather producer in Indonesia. The leather craft production process in Magetan still uses the traditional method or what is known as handmade. The problems raised were obtained based on...
This paper presents a bibliometric analysis and review of the progress of sustainable biofuel supply chain research. Based on a search of the Scopus database, it resulted in 208 articles published from 2013 to 2022. Bibliometric analysis examines the results by observing keywords, journal trends, and authorship. The results of the analysis of publi...
This research investigates the factors influencing the adoption of electric motorcycles in Indonesia. The background of the study lies in the growing interest in sustainable transportation and the potential of electric motorcycles as an eco-friendly alternative. The objective is to understand the impact of travel behavior and knowledge levels on th...
Battery Electric Vehicle (BEV) has become a new technological innovation that effectively accelerates electrification due to their short charging and swapping processes. On the other hand, developing charging infrastructure, such as charging stations, still needs to be improved in Indonesia. The absence of government policies regulating charging st...
The usage of advertising as a medium for marketing products/services is used by various businesses to increase profits. The advertising medium mainly used is billboards, which still use fossil energy as an energy source. The Indonesian government's 2060 Net Zero Emission Program promotes using renewable energy (RE) as an energy source, such as phot...
Purpose
This research aims to assess and compare project-based learning (PBL) designs to deliver technopreneur in higher education, as a case student of the Industrial Engineering Department. So, it can facilitate students who play a role in facilitating the process of technological transformation so the student knows well how to solve the problem...
Indonesia is one of the largest motorcycle markets in the world. This condition has an impact on high air pollution and greenhouse gas emissions. Migration from fossil fuel to electric motorcycles can reduce greenhouse gas emissions. Many consumers are not aware of the operational cost savings of using EM. These savings can be calculated using the...
This paper presents a bibliometric analysis to find the trends and future research opportunities in electric motorcycle (EM) adoption. Bibliometric analysis is performed in three stages: data collection, data visualization, and data analysis. This analysis involves 31 articles published in the Scopus database from 2012 to 2022. The results show tha...
Sustainability supply chain management (SSCM) is related to supply chain practices that synergize with sustainable practices along the supply chain. This study tries to describe the scope of sustainable production and consumption, especially related to the use of raw materials in the mocaf agro-industry. Mocaf is a commodity of modified cassava flo...
In Indonesia, motorcycle ownership is more than other motorized vehicles. However, the more motorbikes are used, the more vehicle emissions are released. So we need transportation solutions that are more environmentally friendly and energy efficient such as electric motorbikes which can be obtained with a converter kit by still utilizing existing c...
p>Pandemi Covid-19 telah turut serta dalam memberikan dampak pada industri kopi di Indonesia. Namun, prospek kopi tetap menjanjikan karena didukung oleh produksi dan konsumsi dalam negeri, serta hasil nilai ekspor yang tinggi. Industri ini juga masih berpeluang sebagai salah satu penggerak perekonomian nasional. Di beberapa kota besar seperti Solo,...
Worldwide are working to support the transition of internal combustion engine vehicles to electric (battery-based) vehicles. The electric vehicle program has faltered because the sales target for electric motorcycles until early 2022 reached only 60%. One reason is that investment in electric vehicles is still considered relatively high. The result...
Indonesia's economic sector continues to rely on carbon-emitting fossil fuels. The government is speeding up electrification by encouraging people to switch from traditional to electric automobiles. Electric motorcycles are one option for lowering CO2 emissions. Many researchers have investigated the value attributes affecting consumers’ attitudes...
Many benefits follow from the use of Electric Vehicles (EVs) to replace fossil fuel-based vehicles (FVs), i.e., improved transportation energy efficiency, reduced carbon and noise emissions, and the mitigation of tailpipe emissions. However, replacing conventional FVs with EVs requires the establishment of a suitable charging infrastructure represe...
The adoption of electric vehicles (EVs) is one of the solutions to reduce emission problems. Vehicle cost analysis is one of the keys to seizing the Indonesian market. As a consumer, it is not only the purchase price that needs to be considered, but the life cycle costs throughout ownership also need to be considered in the purchase. This study dis...
Warehouse of Company X has two production supply destinations, TFD 315 and TFD 500. One of the supply destinations has a high workload for the forklift driver. It happened because of the long distance when doing material handling. Warehouse’s layout of company X is not optimal that causing huge material handling costs. So, relayout of the facilitie...
In this study, we developed an optimization model for determining the optimal parameters for multi-pass CNC turning processes. The six elements of sustainable manufacturing were considered in this study to derive new insights into multi-pass turning modeling. This paper details the relationship between time and power and considers total noise in te...
Penelitian ini bertujuan untuk melakukan analisis pengendalian jadwal dan biaya pada konstruksi pump house C2BM5a. Penelitian dilakukan di PT Prasadha Pamunah Limbah Industri, sebuah industri penyedia jasa pengolahan limbah yang berlokasi di Desa Nambo, Kabupaten Bogor. Metode yang digunakan dalam penelitian adalah metode nilai hasil atau earned va...
The innovation of electric motorcycle swap-battery (EMSB) technology encourages the formation of a new ecosystem at the early stage of the supply chain. The EMSB technology has allowed an open innovation system with collaboration between supply-chain players, universities, and the government for finding a thriving solution to enable the faster adop...
Insect attacks are a very complicated problem in rice cultivation that cause a decrease in rice productivity. It is very important to not use pesticides to kill pests due to environmental and health issues. This study aimed to solve the pest problem by installing solar-powered pest-control technology using waves of ultraviolet light and ultrasonic...
The purpose of this research is to develop a model for measuring the efficiency of the TTO incubation process performance to accelerate the commercialization of research results in universities. The method of analyzing the efficiency used in this research is the Data Envelopment Analysis (DEA) method based on Banker, Charnes, and Cooper (BCC), whic...
Although municipal solid waste (MSW) is a concern in many countries, it may be a highly appealing alternative feedstock for gasification to create sustainable gas fuels. The creation of hydrogen syngas from MSW gasification has received a lot of attention. The employment of a catalyst in the MSW gasification process is known to boost the gasificati...
In 2019, the number of conventional vehicles in Indonesia reached 133,617,012 units, dominated by motorcycles of 112,771,136 units and passenger cars of 15,592,419 units. The high number of conventional motorcycle users can increase the number of pollutants and combustion emissions in the environment. This condition has encouraged the transition to...
The ambition of Indonesia's government to improve technology and reduce CO2 emissions through electric motorcycles has been compiled into several programs and policies. However, the growth of adoption of it is meager. Therefore, a study was conducted to see the intention-to-use of electric motorcycles so the process can run properly. This study dev...
The adoption of Electric Vehicles (EV) is one of the solutions to reduce emission problems. In Indonesia, the government targets 2.1 million Electric Motorcycles (EM) ownership in 2025. One of the keys to encouraging the EV Indonesian market is vehicle cost analysis, like Total Cost of Ownership (TCO). This study developed a TCO model to compare EM...
The increasingly competitive industrial competition makes companies from all sectors around the world change the system to be more efficient and effective. One of the efforts to improve the company is by implementing a Warehouse Management System (WMS). Lately, many large companies are implementing Auto-ID (automatic identification) technology to s...
This study develops an integrated step by step approach for Lean-Agile (Leagile) supplier selection of automotive manufacturing companies. Although the concepts of Lean Manufacturing (LM) and Agile Manufacturing (AM) have been vastly discussed in previous literature, Leagile manufacturing strategy has been less examined, especially linked with supp...
An effective facility planning can significantly reduce the operational costs of companies. The facility layout problem is relating to location of objects on a given site and the material flow between these objects. The study conducted in a Hard Disk Drive (HDD) manufacturer. In the company, there are several obstacles was found in the Brushing Roo...
Quality of a power system network can be evaluated from its voltage performance. There are several bus/substation of Java Bali networks that frequently operate in unsatisfied voltage level. As an important part of Indonesian electricity system, quality improvement of this network should be sustainably maintained. The occurring problem can be solved...
The study was conducted in a data storage manufacturing company that currently produces more than ten types of hard disk component products both internal and external. Based on observations of their manufacturing lines, it indicates an imbalance in the production line. Balancing the production line minimizes idle time at all work stations. One comp...
Circulating fluidized bed (CFB) is one type of coal combustion technologies that plays an essential role in the power generation. CFB boilers use the principle of the thermal inertia of material deliberately inserted into the furnace (known as bed materials) which is usually sand particles. The existence of materials in the form of particles with h...
The risk of fire in power generation is the latest issue of concern to the electricity business. Several preventive programs such as coal dust control and the improvement of coal handling facilities to the provision of fire fighting infrastructure have been carried out continuously, but the main problem in the implementation of further work program...
The electronics industry is one of the growing industrial sectors because of the need for electronics industry products continuously increases. This situation of development is driving the fast pace of electronics industry companies in Malaysia to be better prepared to face competition in the era of free trade. The study was carried in an electroni...
Coal pulverizing systems reliability can be ensured effectively by using prognostics and health management approach. A mathematical model of coal pulverizing system used for anomaly detection is hard to be constructed due to its dynamic and nonlinear high-dimensional system typically. This paper proposed the use of the Long-Short Term Memory Autoen...
Technological developments have made it easier for people to use social networks. Almost all people of productive age use the internet in their social interactions. The purpose of this research is primarily to provide a platform for TemanRindu to make its product prototype appropriately with the Lean Canvas business model and so Startup Evolution C...
Soybean self-sufficiency in Central Java Province is a problem that is difficult to realize at this time. As an important commodity, self-sufficiency becomes a serious concern for the government. Supply chain management of soybean is related to the integration of supply, demand, and distribution of soybean. The characteristics of entities involved...
To measure the performance of the production process, an efficiency calculation is performed using the Overall Equipment Effectiveness (OEE) method. OEE can measure various production losses and identify potential developments that can be carried out in a production process. This research is expected to be an input to improve production efficiency....
Futura Energy Nusantara is the first manufacturer of lithium-ion battery cell production in Indonesia. Because highly demand, the company must fill the order and increase production Productivity is one of the most fundamental and important determinants of system production. Productivity measurement help identify the problems and find solutions to i...
Production planning is very important in a production because it is related to the amount of fluctuating consumer demand in each period. If there is a product shortage will cause consumer demand cannot be fulfilled so the company loses profits and commitment from customers who have trusted. However, if the excess production in a certain period ther...
This research analyzes the performance measurement in sustainable supply chain using sustainable triple bottom line aspects, namely environmental dimension, social dimension, and economic dimension. The analysis process is accomplished for 40 articles, which are from Scopus website related to sustainable supply chain. The focus in analysis process...
The development of technology is done to advance knowledge and simplify life, and to develop the issues that are around. The development of electric vehicles must be encouraged by the development of batteries used to run these vehicles. The batteries used are usually made from lithium, because it has a strong electrical shelf life, not easily damag...
Fluctuations in soybean commodity prices become a crucial issue in Indonesia every year. In this study, it is proposed to conduct a research on the development of a dynamic simulation model for fulfilling the logistics of soybeans, which aims to look at the competitiveness of local soybeans and to support soybean price stability (case study: in Cen...
Traceability in agri-food has become an important aspect of consumer awareness that demand foods that are available, in good quality, healthy, and traceable in handling processes. This field has also become the focus of the study among the related scientists. We used bibliometric analysis to review the published traceability of agri-food papers. Th...