Mohammed Suhaib

National Islamic University · Department of Mechanical Engineering

Research and development towards electric vehicles (EVs) are getting exclusive attention because of their eco-friendly nature, suppression of petroleum products, greener transport, and zero carbon emission at the tail point. The battery is a crucial component of an EV. A review of progress and hurdles of (i) current states of EVs, batteries, and ba...

Purpose Evaluation of the extent of transformability of an existing system into an industry 4.0 (I4.0) compatible system is indispensable for both the technical and economic planning for implementing I4.0. This paper aims to propose a procedure to evaluate the transformability of an existing manufacturing system into an I4.0 system. Design/methodo...

MQL has gained lot of attention in the past decade owing to its effectiveness over the conventional fluid delivery method. Conventional cutting fluid delivery methods have major drawback of being used in large quantity and dangerous effect on environment and workers health. MQL has emerged as a viable alternate to the conventional fluid delivery me...

Cutting fluids are required in huge amount in the modern machining methods. Cutting fluids are needed for providing lubrication as well as cooling the workpiece during machining. Cutting fluids are made of mineral oils and have many drawbacks including many health hazards and environment impact. Various other methods of cutting fluid delivery are b...

Cutting fluids are required in huge amount in the modern machining methods. Cutting fluids are needed for providing lubrication as well as cooling the workpiece during machining. Cutting fluids are made of mineral oils and have many drawbacks including many health hazards and environment impact. Various other methods of cutting fluid delivery are b...

In the current era, the public is receiving much devotion to hybrid electric vehicles as the subsequent technology pattern in the road transport sector. Three-wheeler ‘battery’ vehicles are extensively used for intracity transport facility in Indian cities. These vehicles are known as smart e-vehicle and have the potential to mitigate the carbon em...

Structural synthesis of kinematic chains has been an indispensable area of the mechanism-design problem. The duplication may occur while developing kinematic chains. Therefore, an isomorphic test is required to eliminate duplication. For this purpose, the numbers of methods are proposed during recent years. However, most of the methods are complex...

Cutting fluids are an inherent part of the modern manufacturing system. With the increase in the industrialization and development of new materials and processes, there has been a need for developing new cutting fluids with superior performance. For achieving this, cutting fluids have been produced from mineral oil and other additives. The additive...

Cutting fluids play a major role in the metal industry. They are used for having increased material removal rates and increasing the quality of the machined product. The cutting fluids have been used for many decades after their efficacy in increasing productivity was established. Since the advent of cutting fluids the market has flooded with diffe...

Cutting fluids are the category of metalworking fluids which are used in metal machining operation. Application of cutting fluids eases metal removal and enhances the productivity of the industry. Cutting fluids have been used for many decades. Lately the industry is looking toward shifting to using biodegradable cutting fluids. In the last decade...

Solar/battery electric vehicles are the future vehicles in place of the conventional engine vehicles to meet the sustainable development goal. Solar electric vehicles have several advantages over conventional vehicles such as eco-friendly, fewer emissions at the tail point and improved transmission efficiency. Photovoltaic (PV) panels can mount on...

In last two decades, Automation and artificial intelligent improves accuracy as well as quality of product and reduced processing time due to enormous advancement in the technology of robotics. At present time, the most crucial factors in modern world are scarcity of energy resources for global demand. Due to environment issues and legislative stra...

Grasping is concerned with characterizing and achieving the conditions that will ensure that a robot gripper holds an object securely, preventing, for example, any motion due to external forces. A system where in a desired object is gripped by the fingers of a robot (or human) and is generally called a grasp. Most of past researches are restricted...

Manufacturing organisations adopt Flexible Manufacturing Systems (FMSs) to meet the challenges imposed by today's volatile market standards. But the implementation of FMSs is not an easy job. Various barriers are experienced in real-life cases during its implementation. It is very much necessary to analyse the nature and impact of these barriers so...

Purpose Today's volatile condition of the market is forcing the manufacturing organizations to adapt the flexible manufacturing systems (FMS) to meet the challenges imposed by international competition, ever‐changing customer demands, rapid delivery to market, and advancement in technology. There are certain enablers, which help in the implementati...

Manufacturing companies have realised the importance of flexible manufacturing systems (FMS) due to ever changing customer demands and growing international competition. But, implementation of this universally accepted and challenging technology is not an easy task. There are certain barriers which not only influence the implementation process but...

The volatile condition of today's market is forcing the manufacturing managers to adapt the flexible manufacturing systems (FMS) to meet the challenges imposed by international competition, ever changing customer demands, rapid delivery to market and advancement in technology. There are certain enablers, which help in the implementation of FMS or i...

Advance Manufacturing Techniques (AMT) help the manufacturing organisations to produce more customised products of higher quality and lower cost within a shorter time span. But implementation of AMT requires high investment and careful planning at all levels of the organisation. This paper presents the case of a traditional manufacturing company wh...

Global competition, advancements in technology and ever changing customers’ demand have made the manufacturing companies to realize the importance of flexible manufacturing systems (FMS). These organizations are looking at FMS as a viable alternative to enhance their competitive edge. But, implementation of this universally accepted and challenging...