• Home
  • Mohammed Mosleh Salman
Mohammed Mosleh Salman

Mohammed Mosleh Salman
Al-Mustansiriyah University · Civil Engineering

Professor

About

32
Publications
5,235
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
77
Citations
Introduction
I am interested in different types of Cement, most of building materials, modern types of Concrete, new building materials.

Publications

Publications (32)
Article
Self-consolidating concrete (SCC) is increasingly used in a number of concrete applications, some of which are highly susceptible to attack by sulfuric acid. This work aimed to study the resistance of a wide range of different SCCs to sulfuric attack. The main variables studied included binder material type (highly reactive materials), limestone po...
Article
Full-text available
The main objective of this study is to understand the work of the pile caps made of lightweight aerated foam concrete and study the many factors affecting the ability and the capacity of the shear. The study was done by analyzing previous practical and theoretical experiences on the reinforced concrete pile caps. The previous practical results indi...
Article
In this investigation, the natural sand replaced up to 30% by aluminum wastes (AW) to produce green cement mortar for different construction applications. The dry density and the compressive strength of all specimens at ages (7, 14, and 28) days were measured. To examine the microstructure of the specimens at 28 days, the scanning electron microsco...
Article
Full-text available
Workability is one of the factors that affect concrete strength and durability in addition to the cost of labor and the appearance of the final product. It is a vital feature of the concrete that must be measured properly to ensure the quality of concrete. This paper presents a method for predicting equations for workability of concrete and correla...
Article
Full-text available
Autoclaved aerated concrete (called Thermostone in Iraq) is one of the popular building materials that are used in various purposes in construction industries. It is factory-made material that can be moulded into blocks which can be used in framework buildings. However, these buildings are under the risk of fire since it has different cusses such a...
Article
Full-text available
Wood is a biomaterial and its used for different purposes in construction. The testing of any material is very important to decide its suitability, quality and making decision whether it will be used or not so it is necessary to determine the mechanical properties of wood inorder to have an idea about its behavior during loading of structure. The a...
Article
Full-text available
Applying some material such as Flunkout or sodium silicate on concrete surface has a great effect in enhancing the strength of concrete and eliminate the damage resulted from exposure to aggressive environments. Besides, it's extended the service life of concrete. This research present a study on the effect of (Flunkout and sodium silicate) on the...
Preprint
Full-text available
Applying some material such as Flunkout or sodium silicate on concrete surface has a great effect in enhancing the strength of concrete and eliminate the damage resulted from exposure to aggressive environments. Besides, it's extended the service life of concrete. This research present a study on the effect of (Flunkout and sodium silicate) on the...
Article
Full-text available
This research aims to study the problems of the rotary kiln of al Kufa cement plant. The heating process of the furnace starts by burning a certain amount of wood near the fuel outlet inside the rotary kiln to provide the initial combustion process of the heating oil at (80-100°C). Then the front fan of the furnace is operated while the heating pro...
Research
Abstract This work aims at studying the post-heating behavior of normal strength concrete (NSC), high strength concrete (HSC) and lightweight concrete (LWC) slabs and assessing the residual flexural strength of two-way slab specimens. Eleven reduced scale reinforced concrete slab specimens divided into three main groups representing the NSC, HSC an...
Article
Full-text available
This research investigated the possibility of using plaster of Paris instead of cement in some internal structural parts and non-exposed to moisture by casting (nine) samples divided in three group. First group was normal concrete, second was plaster of pairs concrete group and finally plaster of Paris with aggregate concrete. All of them have the...
Article
Full-text available
In this paper, the cross section behavior of reinforced concrete columns made of normal and hybrid reactive powder concrete (hybrid by steel and polypropylene fibers) under concentric and eccentric vertical load was study. The casted columns were cured in two different type tap water for 28 days and chloride water for six months. Chloride salts wit...
Article
Full-text available
In this research, the structural behavior of reinforced concrete columns made of normal and hybrid reactive powder concrete (hybrid by steel and polypropylene fibers) subjected to chloride salts with concentration was 8341.6 mg/l. The study consists of two parts, the first one is experimental study and the second one is theoretical analysis. Three...
Article
Full-text available
Self-compacting concrete can be used in many concrete applications some of it susceptible to acid attacks. The aims of this study are to investigate the resistance of different SCC mixture designs to sulphuric acid attacks. The test variables included the type of hybrid fibers (steel, plastic and polypropylene fibers). The powder content of the mix...
Article
Sulfate attack is a serious factor play important role in the degradation of structural capacity of reinforced concrete structures members especially those members exposure with ground water or sea water. This paper study the effect of external sulfate attack on mechanical properties of hybrid fiber reactive powder concrete (HFRPC) containing (poly...
Patent
تطوير للابتكار المعروف "الياف الحديد (Steel Fiber)", والمستخدم في الخرسانة المسلحة. حيث تتواجد أنواع متعددة من الياف الحديد تختلف فيما بينها من حيث نوعية المادة والشكل والمقطع والشركة المصنعة ونسبة الطول الى القطر (Aspect Ratio) ونسبة الخلط في الخرسانة (Volume Fraction). وتضاف الياف الحديد الى الخرسانة الطرية اثناء خلط الركام والسمنت مع الماء لتغيي...
Conference Paper
Full-text available
This research aims to study the possibility of using disk washers welded through reinforcement rebar instead of the ordinary reinforcement steel bars or strand used in concrete. This study also includes experimental work to cast 12 samples of full scale beams, dimensions 2515 mm length, 264 mm width and 212 mm height, which is the same model of the...
Article
The main purpose of this experimental study is to investigate the behavior and strength of self-compacting reinforced concrete corbels with and without steel fibers. The program included (10) specimens, in which the shear span to effective depth ratio (a/d), the amount of steel fiber (Vf), and compressive strength(f'c)of self-compacting concrete we...
Article
This paper studies the properties of normal and high strength self-compacting concrete in fresh and hardened state, six of self-compacting with normal and high strength concrete mixes were prepared with different percentage of fibers(0, 0.4%, and 0.8%) where used to find out the effect of the addition of steel fibers on the properties of self-compa...
Article
Full-text available
This paper discusses shear behavior of hybrid reinforced concrete beams that consist of two different concrete layers: the tension layer is made of normal strength concrete with compressive strength of 25 MPa and the compression layer is made of self-compacting concrete with two values for compressive strength of 25 and 50 MPa. These hybrid beams h...
Article
Full-text available
The study is concerned with the structural behavior of (24) reinforced T-shaped cross-section beams made of self-compacting concrete under flexural with two types of fibers (polypropylene and steel fibers). Compression and tensile strengths, deflection, ductility and cracking behavior are considered. Experimental results are compared with these eva...
Article
Full-text available
This paper discusses shear behavior of hybrid reinforced concrete beams that consist of two different concrete layers: the tension layer is made of normal strength concrete with compressive strength of 25 MPa and the compression layer is made of self-compacting concrete with two values for compressive strength of 25 and 50 MPa. These hybrid beams h...
Conference Paper
Full-text available
In a recent years needed was appeared to use environmentally friendly materials, with the account of economic cost, mainly it was used of clay in construction. This research studies the clay bricks stabilized by cement. Different models (about 170 specimens) depending on the materials used and their ratios, as well as the applied pressure was studi...

Network

Cited By

Projects

Projects (4)
Project
Structural behavior of different members Comparison between normal concrete and varied types of concrete Experimental behavior of specimens Fire effects