Mohammad Shalby

Mohammad Shalby
Al-Hussein Bin Talal University | AHU · Department of Mechanical Engineering

BEng, MSc, PhD
I am looking to collaborate on R&D projects.

About

23
Publications
2,342
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
80
Citations
Introduction
I have a Ph.D. in mechanical engineering from the University of Technology Sydney, Ultimo, NSW, Australia. I am currently working as an assistant professor at Al-Hussein Bin Talal University, Ma'an, Jordan. My primary research interests include the design and development oscillating water column device that use to harvest the ocean wave energy.
Additional affiliations
July 2019 - present
Al-Hussein Bin Talal University
Position
  • Professor (Assistant)
March 2019 - July 2019
University of Technology Sydney
Position
  • Teacher assistant
January 2015 - January 2015
Al-Hussein Bin Talal University
Position
  • Engineer
Description
  • I manage, develop and begin the training rule inside the engineering workshops, in which, the engineering students learn and apply a given several practical activities.
Education
February 2015 - February 2019
University of Technology Sydney
Field of study
  • Mechanical Engineer
July 2007 - November 2012
Mu’tah University
Field of study
  • Engineering Management
September 2000 - January 2005
Jordan University of Science and Technology
Field of study
  • Mechanical Enginner

Publications

Publications (23)
Article
Full-text available
The refrigeration systems consume a high amount of energy. In Jordan, conventional energy is an expensive option. Thus, this consumption will be significant. In this work, a mathematical model of the Single-Effect Solar Absorption Cooling system (SESAC), utilizing Lithium Bromide-Water (LiBr–H2O) as the working fluid, has been developed with evacua...
Article
Full-text available
The doubly fed induction generator is commonly used in commercial wind turbines because of its simplicity and robustness; it is a wound rotor induction machine. It has a relatively small airgap which makes it more vulnerable to unbalanced magnetic pull. This paper presents a simulation model to investigate the ability of extra stator windings with...
Article
Full-text available
This paper examines the impact of accumulated dust on two types of photovoltaic (PV) cells in the performance of solar panels facility located in the southern part of Jordan between January to August 2020. To determine the performance of the solar PV panel system, two elements have been considered: sun radiation total efficiency and output power ge...
Article
Full-text available
This paper examines the impact of accumulated dust on two types of photovoltaic (PV) cells in the performance of solar panels facility located in the southern part of Jordan between January to August 2020. To determine the performance of the solar PV panel system, two elements have been considered: sun radiation total efficiency and output power ge...
Article
Full-text available
Sea wave energy generators or converters (WECs) have the potential to become a viable technology for clean, renewable energy production. Among the WEC technologies, the oscillating water columns (OWCs) are the most common WEC devices studied. These have been studied and developed over many years. Multi-chamber oscillating water columns (MC-OWC) hav...
Article
Full-text available
Rising fuel price , depletion of traditional energy reserves and environmental issues are the main drivers for production biodiesel from alternative resources such as (WCO),its became more attractive to researchers in recent time This study aims to convert Waste Cooking Oil (WCO) to biodiesel by esterification and trans-esterification processes usi...
Article
- The aim of the study was to examine the effect of specific geometrical parameters on the performance of small Straight Blade –Vertical Axis Wind Turbine (SB-VAWT) of Darrieus-type. The study processes involve selecting fixed and different geometrical parameters for turbine and predicting the performance of the turbine based on the selected parame...
Article
Full-text available
Due to the increasing environmental and economic cost of fossil fuels, alternative sources of energy are needed. One of these sources is wind energy. The wind-turbines extract kinetic energy from the wind to convert it to mechanical energy and then transfer to electrical energy. Wind speed is the most important parameter for an efficient wind energ...
Article
Full-text available
Objective Energy is one of the most significant inputs for development and economic growth. Jordan faces big internal and regional challenges concerns. One of these challenges is the growing Electricity demand, which accompanied by a shortage of available natural resources. Locally, Jordan is generating very limited Electrical energy that contribut...
Article
Energy is one of the most critical inputs for the development and economic growth. The objective of this study is to investigate the possibilities of fulfilling such global market demands, even going so far as to provide for a more reliable power source that can extend its reach to rural and remote areas. Therefore, in this work, investigating the...
Article
Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost-sharing structures and proximity of power generation facilities to existing...
Thesis
This thesis focuses on preliminary investigating the hydrodynamic performance of a fixed Multi–Chamber OWC (MC–OWC) wave energy converter, which consists of a linear array of four OWC chambers aligned in the same direction of the incident wave propagation. These investigations address the gaps found in previous works by putting forward detailed exp...
Experiment Findings
In this work, a total of 198 tests were performed under regular and irregular wave conditions to investigate the effect of incoming wave period, wave height, device draught and PTO damping on the hydrodynamic performance of the MC–OWC model. The experiments systematically investigated the following variables: two regular wave heights H = 50 and 100...
Conference Paper
Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has been focused on the installation of Oscillating Water Column (OWC) devices as part of breakwaters or harbour walls to provide advantages of cost-sharing structures and proximity of power generation fac...
Article
The oscillating water column (OWC) is a more common type of wave energy converter (WEC) that has been the subject of the study and development for several decades. Multi–chamber oscillating water column (MC–OWC) devices or arrays have the advantage of being more efficient in energy extraction compared to a single chamber system, particularly in mor...
Conference Paper
This paper studies the reliability of numerical models used for estimating multi-chamber oscillating water column (MC-OWC) response in the time-domain. The model for the internal water surface level and instantaneous pressure inside the chamber at regular waves conditions using a hybrid system of hydrodynamic and thermodynamic rigid piston models w...
Conference Paper
Wave Energy Converters (WECs) are being developed as a viable green energy solution to meet power needs for coastal communities. This paper presents the initial work on a fixed multi-chamber OWC (MCOWC) concept. The paper reports theoretical and experimental modeling. It begins with initial tests to verify the simple idealized model of a fixed OWC...
Conference Paper
This paper presents the first stages towards modeling a fixed multi-chamber OWC (MCOWC). The paper reports on the characteristics of the MCOWC. It begins with the system analysis of the multi-chamber fixed OWC based on the wave tank conditions. The analysis is carried through to assess the effect of the two factors: water surface level inside the c...
Thesis
The purpose of this work is to analyze the sound signal and dynamic (vibration) signal in details by special computer software in order to optimize the most representative parameters (features) of the signal. These parameters required to be used to distinguish between the signals emitted from different sources or from the same source but under...

Questions

Questions (2)
Question
I've got a measurement for ten sensors (time series), and I've repeated this test three times under the same operating condition.
Question
Effective mass, and secondary damping  

Network

Cited By

Projects

Projects (3)
Project
This project aims to investigate high-performance energy and water design measures and strategies in existing buildings of southern Jordanian already-built buildings in the hot-dry context of Ma'an-city to transform existing residential buildings into Water-Energy efficient ones. This project encourages better design and construction practices that promote passive and active design strategies and water efficiency.
Archived project
This project aims to investigate high-performance energy and water design measures and strategies in existing buildings of southern Jordanian already-built buildings in the hot-dry context of Maan-city to transform existing residential buildings into Water-Energy efficient ones. This project encourages better design and construction practices that promote passive and active energy and water efficiency.
Project
To move any OWC devices from the prototype stage to a more developed and complete technology like wind and solar technologies, a further research effort is still needed. Therefore, in this project, the development of a MC–OWC device will be studied through successive stages of experimental testing and numerical modelling on a small–scale.