Mohammad Rezaei LarijaniSharif University of Technology | SHARIF · Department of Electrical Engineering
Mohammad Rezaei Larijani
Doctor of Philosophy
About
4
Publications
7,052
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
11
Citations
Introduction
Additional affiliations
February 2016 - February 2016
IEEE workshop
Position
- Workshop presenter
Publications
Publications (4)
![Fig. 1 The ADC-based switch model [16]](profile/Mohammad-Rezaei-Larijani/publication/349503976/figure/fig1/AS:994066460311553@1614015321117/The-ADC-based-switch-model-16_Q320.jpg)
The method for modeling switching converters plays a key role in real-time simulators. Associate discrete circuit (ADC) modeling technique is a commonly used method for modeling the switching converter. However, the optimal selection of the ADC-based switch model parameters has great importance in the accuracy of the real-time simulator. In this pa...
This paper presents a methodology for implementing the mathematical model of H-Bridge converter in an FPGA-based Real-time simulator. Furthermore, it introduces a new method for choosing parameters of the Associate Discrete Circuit (ADC) model of semiconductor switches. The ADC-based model allows obtaining a fixed topology irrespective of switches...
Questions
Questions (8)
The circuit diagram of MOSFET after fault is short-circuit
Hi
I design a PID controller for a buck converter
I discrete it by matlab with ZOH and Ts=500 ns
and it works. However, this controller does not work for other time-step, such 100 ns or 1000 ns. For other time-step the output is 0!
How we can find the optimum time-step to for a digital controller?
Thanks
I have a problem about stability region of the system that is discrete.
I would appreciate if you could answer my question.
I have a circuit that including several capacitance, inductance, and
resistance. I get the A (state space matrix) of the system and then
discrete this matrix by Backward Euler method.
Also The eigenvalues of the matrix(A) have been calculated.
My question is:
For stability testing of the system that is discrete by BEM, Do
eigenvalues of matrix must be
1)Inside the unit circle centered at zero?
or
2)Outside the unit circle centered at one?
If your answer is 1, please see this PDF file(Fig 7.1 b)
why said this in PDF?
Hello my working is on Atlys Board (Spartan 6 ) i want to generate 400 MHz clock , How i can do it ?
I want to multiply admittance matrix of power electronic converter(PEC) in m.file of matlab,First i want to multiply matrix admittance of circuit to vector of
current
source to achieve nodal voltage.
the current source is dependent to voltage of node, so the vector of
current source should be updated in simulation time.
i want to implement the circuit in M.file
How i can begin to write in m.file?
Associated discrete circuit for switch
I want to design a Real-time simulator based on FPGA
I want to use the modified nodal analysis to achieve inductance matrix of circuit: How can I achieve this matic to multiply this into voltage and current branch?
