Mohamed Ahmed Moustafa Hassan

Mohamed Ahmed Moustafa Hassan
Cairo University | CU · Department of Electric Power and Machines

Prof. Dr.

About

187
Publications
84,515
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
1,241
Citations
Introduction
Implementation of Advanced FLC. Implementation of Different Controllers on SMIB Control of Power Systems using different techniques SCADA for Industrial and Electric Power Systems, and WTP Intelligent PSS and LFC. Using AI Techniques in Protection Systems Using of ANFIS technique in Control and Protection systems. Modeling, and control of Gas Turbines in CCPP. Modeling, and control of HRSG in CCPP. Modeling and Control of Renewable Energy Particle Swarm Optimization Fractional Order PID
Additional affiliations
October 2011 - present
Cairo University
Position
  • Professor
Description
  • M. A. Moustafa Hassan is Professor (Control of Power Systems) in Electric Power Dept., Cairo Uni­versity He visited many countries for practical Training during his study. Also, He was awarded a DAAD Scholarship to study for his PhD program. .
October 1994 - September 1998
UAE Uni + TSI + AUST
Position
  • Professor
Description
  • Teaching
October 1989 - September 1992
The University of Calgary
Position
  • Researcher
Description
  • I worked at the University of calgary as visiting A. professor, funded partially by CIDA
Education
September 1972 - December 1982
Cairo University
Field of study
  • Electrical Engineering

Publications

Publications (187)
Article
Full-text available
Renewable energy resources are the favorable solution for the coming energy. So, a great interest has been paid in the last decades for developing and utilizing renewable energy resources such as wind energy. As it has a large energy content and, particularizes with the availability, the major problems of it is represented in unmatched with load de...
Conference Paper
In most of machine control and automation problems, there are two or more axes of motion which must be coordinated. Axes synchronization is a crucial task in modern machinery for contouring control. It aims to feed each axis with commands that keeps it follow its target contour. In addition, to modify these commands to keep the actual contour very...
Article
Full-text available
This paper proposes an Adaptive Neural Fuzzy Inference System (ANFIS) model for diagnosis of combined Inter Turn Short Circuit (ITSC) and Broken Rotor Bar (BRB) faults in a Squirrel Cage Induction Motor (SC-IM). The signal of the stator current is obtained from a really healthy and faulty SC-IM. Experimental tests have been set up using a 1.5 Hp/38...
Article
This paper presents an adaptive robust Energy Management (EM) model for an isolated Microgrid (MG) to decide for the day-ahead optimal dispatch to effectively manage the MG power sources considering uncertainties in Renewable Energy Sources (RESs). The aim of this model is to minimize the operation costs, reactive power costs, spinning reserve and...
Article
Full-text available
This study proposes an algorithm to allocate different types of flexible AC transmission system (FACTS) in power systems. The main objective of this study is to maximize profit by minimizing the system’s operating cost including FACTS devices (FDs) installation cost. Dynamic and steady state operating restrictions with loads uncertainty are include...
Article
Full-text available
This paper proposes a two-stage stochastic energy management (EM) in an isolated microgrid (MG) to decide for the day-ahead optimal dispatch. The dispatch aims to effectively manage the MG power sources, including intermittent renewable energy sources (RESs), battery energy storage systems (BESSs), and diesel generators such that the expected opera...
Article
Full-text available
In this paper, a day-ahead energy management (EM) for isolated microgrids (MGs) is proposed to obtain the optimal dispatch such that the costs related to the fuel consumption of diesel generators, load shedding, and renewable energy curtailment are minimized. Usually, fuel consumption costs of diesel generators are considered to be dependent on act...
Article
Full-text available
A new efficient improvement, called Predictive Particle Modification (PPM), is proposed in this paper. This modification makes the particle look to the near area before moving toward the best solution of the group. This modification can be applied to any population algorithm. The basic philosophy of PPM is explained in detail. To evaluate the perfo...
Article
Full-text available
This paper presents a generalized optimal placement of Phasor Measurement Units (PMUs) considering power system observability, reliability, Communication Infrastructure (CI), and latency time associated with this CI. Moreover, the economic study for additional new data transmission paths is considered as well as the availability of predefined locat...
Conference Paper
Full-text available
Rotating machines are widely utilized in industrial lifecycle, since it represents a vital element in industrial processes. Therefore, quick detection of faults of rotating machines is necessary to sidestep the forced stopping for frequent maintenance in industrial progressions. Several condition monitoring and detecting procedures are used to diag...
Conference Paper
Full-text available
This paper aims to control of satellite position using the two-phase Hybrid Stepping Motor. it's used to receive satellite signal and must accurately track the satellite as it moves across the sky. This system applies the traditional Proportional Integral Derivative (PID) control, the fuzzy PID control methods Fuzzy Logic Control (FLC) and Fraction...
Conference Paper
Full-text available
This paper proposes a new method using Artificial Neural Network (ANN) for detection of different Inter Turn Short Circuit (ITSC) faults in an induction motor under different loading conditions. The stator current signal was obtained experimentally from a healthy motor and a faulty motor with ITSC faults. The statistical time domain features was ex...
Conference Paper
Rotating machines are extensively utilized in industrial life, since it represents a vital element in industrial processes. Therefore, early detection of faults of rotating machines is necessary to avoid the forced stopping for frequent maintenance in industrial processes. Various condition monitoring and detecting procedures are used to diagnose t...
Conference Paper
Full-text available
Concentrated Photovoltaic Thermal (CPVT) or as it known in markets as stand-alone unit for the remote areas to supply the area with electricity and thermal hot water which is used for many years with different applications. In Heliopolis University (HU) for Sustainable Development; two modules have been tested, thermally and electrically. The modul...
Article
Full-text available
p> With the widespread of using distributed generation, the connection of DGs in the distribution system causes miscoordination between protective devices. This paper introduces the problems associated with recloser fuse miscoordination (RFM) in the presence of single and multiple DG in a radial distribution system. Two Multi objective optimization...
Article
Full-text available
This paper proposes a new method for diagnosis Broken Rotor Bar (BRB) faults in three phase squirrel-cage induction motors. The proposed method is based on the stator current signature analysis using Discrete Wavelet Transform (DWT) and Adaptive Neural Fuzzy Inference System (ANFIS) artificial intelligence approach. The DWT technique plays an impor...
Article
Full-text available
This article discusses a system identification based on a black-box state-space model for an experimental electro-hydraulic servo system. Furthermore, it presents force-tracking control for the electro-hydraulic servo system based on model predictive control. The parameters of model predictive controls have been tuned by cuckoo search algorithm as...
Article
Full-text available
In this study, the PMUs are placed to operate in normal and islanded cases taking into account power system observability, reliability, Communication Infrastructure (CI), and latency time associated with this CI. Moreover, the economic study for additional new data transmission paths is considered as well as the preexisting Communication Devices (C...
Article
This manuscript introduces the application of Model Predictive Control (MPC) for high force control precision in a real industrial electro-hydraulic servo system (EHSS). Moreover, it presents a fractional order control (FOC) and conventional controllers (CC) based on genetic algorithm (GA). The GA technique has been used to tune the parameters of F...
Chapter
The voltage regulator may be used to regulate one or more AC or DC voltages in power systems. Voltage regulator may be designed as a simple "feed-forward" or may include "negative feedback" control loops. It may use an electronic components or electromechanical mechanism on the design. AVR is keeping constant output voltage of the generator in a sp...
Chapter
This chapter presents a new method for loss of excitation (LOE) faults detection in hydro-generators using adaptive neuro fuzzy inference system (ANFIS). The investigations were done under a complete loss of excitation conditions, and a partial loss of excitation conditions in different generator loading conditions. In this chapter, four different...
Chapter
This chapter gives introduction to evolutionary techniques. Then it presents the problem formulation for load frequency control with evolutionary particle swarm optimization. It gives the application of particle swarm optimization (PSO) in load frequency control; also, it illustrates the use of an adaptive weight particle swarm optimization (AWPSO)...
Article
Full-text available
DC motors have been broadly used in industry even though its maintenance budgets are upper than the induction motor. Intentional speed controller of a DC motors by choice of a PID factors using several methods Ziegler and Nichols (ZN), Genetic Algorithm(GA), Different Techniques of Particle Swarm Optimization (PSO), and Adaptive Neuro-Fuzzy Inferen...
Conference Paper
In today's world, the demand for the electric power is increasing rapidly; to beat this, several power generation resources are constructing in all over the world. The essential for smart electrical systems having minimum technical loss and environmental effect is providing motivation to go for Distributed Generations (DGs) which may offer differen...
Conference Paper
Full-text available
With great increasing concerns about fossil fuel shortage, global warming, and damage to the environmental system, the encouraging to increase in the alternative energy resources which have low operation cost and low pollutant emissions have a great concern. The photovoltaic (PV) system is one of the renewable energy resources widely spread in the...
Article
Full-text available
The goal of this research is to implement a nonlinear simulation model of hydraulic servo system (HSS).The model is based on physical laws as well as experimental identification of piston position. It also presents the tuning of PID/PI controller’s parameters using particle swarm optimization technique. The mathematical model includes the most nonl...
Conference Paper
Full-text available
The energy sector is one of the major sectors where big steps can be taken towards a sustainable future. This paper represents a study to determine the most effective and accurate technique for Short Term Load Forecasting (STLF) that can be done through Integrated Intelligent Energy Management processes for Smart Grid. The Load Forecasting shall be...
Conference Paper
Full-text available
This article proposes modeling and control system design for PV based Quasi-Z-Source Inverter (QZSI) for grid-tied applications. The control system is designed based on two cascaded controllers. Firstly, output current controller designed in the stationary frame. The second is DC-link voltage controller. Also, Modified Direct Incremental Conductanc...
Conference Paper
Full-text available
This paper proposes modeling and control system design for PV based Quasi-Z-Source Inverter (QZSI) for grid connected applications. The control system is designed based on the dynamical characteristics of the converter and introduces two cascaded controllers. Firstly, output current controller designed in the stationary frame. The second is DC-link...
Conference Paper
Full-text available
In this paper we have described a new design algorithm for the whole set of latent-structure assignment via the approaches of matrix polynomial placement with output noise rejection for a Quadruple tank process, of course the mathematical dynamic model of the process is obtained by MIMO (Simplified Refined Instrumental Variable) SRIV and/or MIMO (L...
Book
A Novel Approach for High Impedance Faults Analysis in Electric Distribution Systems Using Adaptive Neuro Fuzzy Inference Systems
Conference Paper
Full-text available
Due to the electric power liberalization, many power producers are entering into the power market. Most of the electrical power company has been introduced Renewable Energy Sources (RES) that will increase the power system uncertainty. Therefore, it is expected that it will increase the likelihood of voltage instability and voltage collapse. Also,...
Article
Full-text available
This article presents a method for fault detection and diagnosis of stator inter-turn short circuit in three phase induction machines. The technique is based on modelling the motor in the dq frame for both health and fault cases to facilitate recognition of motor current. Using an Adaptive Neuro-Fuzzy Inference System (ANFIS) to provide an efficien...
Conference Paper
Full-text available
Most of electric power companies have introduced renewable energy which increases the power system uncertainty. It is expected that it increases the surplus and deficiency in power system supply. Thus, an energy storage systems and demand response are required for adjusting supply and demand. On the other hand, the power industries are exposed to co...
Chapter
Full-text available
Hydraulic Servo System (HSS) plays an important role in industrial applications and other fields such as plastic injection machine, material testing machines, flight simulator and landing gear system of the aircraft. The main reason of using hydraulic systems in many applications is that, it can provide a high torque and high force. The hydraulic c...
Chapter
The objective of this chapter is to present an optimal Fractional Order Proportional—Integral-Differential (FOPID) controller based upon Reduced Linear Quadratic Regulator (RLQR) using Particle Swarm Optimization (PSO) algorithm and compared with PID controller. The controllers are applied to Inverted Pendulum (IP) system which is one of the most e...
Chapter
Full-text available
This research work presents an advanced solution for the problem due to the current setting of Relay (21). This problem arises when it is set to provide thermal backup protection for the generator during two common system disturbances, namely a system fault and a sudden application of a large system load. These investigations are carried out using...
Article
ABSTRACT This paper presents a new approach for Loss of Excitation (LOE) faults detection in hydro-generators using adaptive neuro fuzzy inference system. The proposed scheme was trained by data from simulation of a 345 kV system under various faults conditions and tested for different loading conditions. Details of the design process and the resul...
Article
Full-text available
This research work presents an advanced solution for the problem due to the current setting of Relay (21). This problem arises when it is set to provide thermal backup protection for the generator during two common system disturbances, namely a system fault and a sudden application of a large system load. These investigations are carried out using...
Chapter
The increased demand for the electricity arises request for providing high-quality power with constant voltage and frequency. Moreover, in the interconnected power system, the main desired objective is the highquality power exchange between areas over interconnecting tie lines. To achieve high quality active and reactive powers, the Load Frequency...
Book
The objective of this chapter is to present an optimal Fractional Order Proportional—Integral-Differential (FOPID) controller based upon Reduced Linear Quadratic Regulator (RLQR) using Particle Swarm Optimization (PSO) algorithm and compared with PID controller. The controllers are applied to Inverted Pendulum (IP) system which is one of the most e...
Conference Paper
Full-text available
Abstract: The advanced application of artificial intelligent techniques (AIT) was introduced recently in protection of transmission lines in electric power systems (EPS) as well as in Control systems. Adaptive Neuro-Fuzzy Inference System (ANFIS) is a promising tool among these AIT. In this review article, the usage of ANFIS technique in different...