About
28
Publications
26,256
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
116
Citations
Introduction
Md Motiur Rahman currently works at the Department of Civil Engineering, Pabna University of Science and Technology. Md does research in Civil Engineering.
Skills and Expertise
Current institution
Additional affiliations
September 2015 - October 2020
September 2013 - August 2015
November 2012 - July 2013
Education
March 2018 - February 2022
Publications
Publications (28)
This study investigates the effectiveness of tuned mass dampers (TMDs) in controlling vibrations in low-rise reinforced concrete buildings. It examines both linear and nonlinear behaviors of concrete structures subjected to strong ground motions from the PEER database. The research follows the ASCE 7-16 provisions to model structural nonlinearity....
Centrifugal tests provide an efficacious experimental process to predict the behavior of deep excavations, and numerical models are indispensable for demonstrating the test results and analyzing the engineering demand parameters. Uncertainty in material properties can cause simulations to differ from tests; therefore, updating the model becomes ine...
The base isolation (BI) device is widely used for reducing seismic energy transmitted to the upper part of the structures. The rubber property of lead rubber bearing (LRB) BI devices degrades with time and environmental conditions, affecting the controlling performance of BI devices. This study investigates the degradation of capacity of base-isola...
The dynamic responses of three storied auxiliary building of a nuclear power plant (NPP) constructed with a monolithic reinforced concrete shear wall are investigated in this study. The dynamic characterization is weighed through a shake table test and evaluated the efficiency of various structural modeling systems for evaluating seismic responses....
The area of this study will cover the location-wise seismic response variation of an electrical cabinet in nuclear power point (NPP) based on classical reliability analysis. The location-based seismic ground motion (GM) selection is carried out with the help of probabilistic seismic hazard analysis using PSHRisk-tool, where the variation of reliabi...
This paper describes a newly developed tool, called FeView, which is a Python-based graphical user interface (GUI) for OpenSees solver. FeView offers an open-source and stand-alone windows system that is very easy and simple to use. It can support a wide range of element types (46 types) and all kinds of material, connection, constraint, analysis o...
The determination of the damage index to reveal the performance level of a structure can constitute the seismic risk generalization approach based on the parametric analysis. This study implemented this concept to one kind of civil engineering structure that is the concrete gravity dam. Different cases of the structure exhibit their individual resp...
The seismic performance of the aged-concrete gravity dam (aged-CGD) by safety assessment based on the reliability-index is the main focal point of this study. Determination of reliability-index has been handled by the site seismic hazard analysis with the help of PSHRisk-tool (developed by the authors) and risk assessment. Incorporated with the unc...
This paper investigates the performance of tuned mass damper (TMD) and dynamic behavior of TMD-controlled concrete structure considering the ground motion (GM) characteristics based on frequency content. The effectiveness of TMD in reducing the structural response and probability of collapse of the building frames are affected by the frequency char...
This study is to evaluate the seismic capacity of the fire-damaged cabinet facility in a nuclear power plant (NPP). A prototype of an electrical cabinet is modeled using OpenSees for the numerical simulation. To capture the nonlinear behavior of the cabinet, the constitutive law of the material model under the fire environment is considered. The ex...
During the construction of the various structures, soil strength plays a vital role in structural performance. Hence, soil improvement techniques are needed to improve the soil strength as well. This study aimed to improve shear strength of sandy soil using granulated waste glass (GWG) and microsteel fiber (MSF). In order to apply this idea, there...
Concrete gravity dam is one of the most important infrastructures for a country. The failure of dam structure due to earthquake affects seriously the surrounding environment, especially in human life. Therefore, the risk assessment of these dams is very important to understand the operant condition of the structure. During the entire service time o...
Reliability assessment is used for decisions making about the acceptability of an existing structure. In this study, the seismic response of Bohyeonsan concrete gravity dam is analyzed using the 2D Finite Element Model (FEM) that is developed by ABAQUS. The calibration of the FEM of this dam is carried out using the Response Surface Methodology (RS...
Now a days in urban area open first story is being very popular due to commercial, residential and public building. It has continuous open space which givesvery vulnerable condition because of getting long story height and reducing the stiffness of the lateral load resisting system in seismic zone. This paper highlights the seismic analysis of firs...
Now a days in urban area open first story is being very popular due to commercial, residential and public building. It has continuous open space which givesvery vulnerable condition because of getting long story height and reducing the stiffness of the lateral load resisting system in seismic zone. This paper highlights the seismic analysis of firs...
The study of the hydraulic conductivity (K) for flow of water through permeable soil media is important in soil
mechanics. It has been recognized that K is statistically related to the grain-size distribution. A series of
permeability test were conducted on five types granular soil (denoted by S-1, S-2, S-3, S-4 and S-5) taken from
different locati...
Soils from Barind tract have been investigated to finding out their geotechnical properties and determine the possible variations between them. Three types of soil samples has been collected from Godagari, Tanore and Kakonhat and they were subjected to a number of geotechnical tests in the laboratory. Then the obtained values were subsequently subj...
In this research shear strength behavior of soil is investigated which is an important aspect in many geotechnical engineering problems such as the bearing capacity of shallow foundations, the stability of the slopes of dams, embankments & hills and lateral earth pressure on retaining walls with presence of marble dust. For identifying the shear st...
Abstract— In this paper the waste materials like SWA as
partial replacement of cement and GP as partial replacement
of sand is used in concrete. Here these materials are used as
a varying percentage to observe the effect of concrete
compressive strength. At first the concrete is mixed with 2%,
4%, 6%, 8% and 10% SWA, keeping constant 5% GP. Then,
o...
Because of quite high tensile strength, economical and locally available; bamboo can
be used as a natural retrofitting material for the strengthening of RCC beam. The
performance of bamboo sticks are investigated in this paper as retrofitted material. Three
set of RCC beams of same dimension (width 4", thickness 6" and span 5.5') are tested up
to u...
In this research, the performances of pH value on shear strength behavior of granular soil have been studied. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls. A series of...
Ferrocement, a thin element is used in building construction as well as a repair material. Here an experimental investigation on ferrocement performance for repairing of RCC beam is presented. Three set RCC beams of the same dimension (width 4″, thickness 6″ and span 5.5′) are tested up to ultimate load by one point loading system as a simply suppo...
Pabna, one of the rising cities in Bangladesh, as a result the population in Pabna increasing day by day along with the traffic congestion. Traffic management plan is one of the best policies to solving the traffic congestion in developing countries like Bangladesh. Development of new transportation system involve huge amount of money and time. Mos...
The economic development of a country mostly depends on the good transportation system. Development of new transportation system involve huge amount of money and time. Most of the cases the invested money is irreversible. The developing country like Bangladesh the best approach is to improvement of existing facilities we have. Pabna, one of the ris...
The shear strength of soils is an important aspect in many foundation engineering problems such as the bearing capacity of shallow foundations, the stability of the slopes of dams and embankments and lateral earth pressure on retaining walls. The purpose this study is to observe the shear strength behavior of granular soil with fine materials up to...
The purpose of this study is to observe the shear strength behavior of granular soil with presence of burnt solid wastes. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls....
The shear strength of soils is an important aspect in many foundation engineering
problems such as the bearing capacity of shallow foundations, the stability of the
slopes of dams and embankments and lateral earth pressure on retaining walls. The
purpose this study is to observe the shear strength behavior of granular soil with
fine materials up to...
Questions
Questions (3)
Could you help me, how can I model concrete gravity dam-foundation interface for getting the sliding of concrete gravity dam during earthquake excitation?
Could anybody help me, how can I find the rigid block contact distance due to earthquake excitation using ansys workbench? I want to use transient analysis with base excitation.
I am trying to make infinite boundary using INFIN257 element but I can't. If anyone can please help me. If anybody have the command format please share, if possible.