Md. Arman Arefin

Md. Arman Arefin
Institut Pprime | Institut P’ · fluid thermal combustion

Doctoral student
Conducting research on thermoacoustics

About

36
Publications
122,224
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
588
Citations

Publications

Publications (36)
Article
Full-text available
Link to download the paper: "https://authors.elsevier.com/c/1dL7X7s~EVlGzs" Objective–Weather parameters such as temperature, humidity, air quality index and wind speed are the important factors influencing the infectious diseases like Covid-19. Therefore, this study aims to discuss and analyse the relation between weather parameters and the spr...
Article
Full-text available
The performance of photovoltaic (PV) panel is extremely sensitive to its operating temperature. Most of the energy absorbed by the panel is wasted in the form of heat and provides no value. Integrated photovoltaic thermal system can be a great solution to this problem. In this study, a numerical and experimental work is conducted on hybrid photovol...
Article
Full-text available
As dairy industries increase across Australia, the amount of dairy waste is also on the rise. Australia annually production stands at around 377 727 t of cheese, 273 425 t of milk powder and 92 698 t of butter, and it is the third largest exporter of milk. The waste produced by these industries is considered a potentially valuable resource, and an...
Article
Full-text available
Aquatic plants have been considered as a cause for concern because they impede aquatic flora and fauna. However, biofuel production from aquatic plants is an emerging energy source. As a consequence, this paper presents a detailed review of bio‐fuel production from floating aquatic plants with their physicochemical properties. The main focus of thi...
Article
The study investigated the key factors that influence the formation of diesel nitrogen oxides (NOx) ethanol-diesel (e-diesel) blends. In the first phase of this investigation, a thermodynamic model was developed to simulate and analyse the different parameters that affect the NOx formation. GT-Power was used to develop the model. ANSYS was also use...
Conference Paper
Direct contact condensation (DCC) induced water hammer in a horizontal pipe was simulated on the local instantaneous scale, using a Computational Fluid Dynamics code with a modification introduced via a user-defined function. The model was first validated using an experiment from the literature. The model was then applied to a DCC-induced water ham...
Thesis
https://lutpub.lut.fi/handle/10024/166246 (direct download link) A new concept of nuclear fuel is considered. Recently, the Ultra Safe Nuclear Corporation has developed a 15 MW thermal powered Micro Modular Reactor (MMR) that uses Tri-structural isotropic coated fully ceramic microencapsulated fuel. Instead of conventional graphite matrix, the fue...
Article
Full-text available
The world has capitalized on numerous renewable energy resources by developing its energy infrastructure mainly around solar, biomass, and hydro energy. However, geothermal energy has not yet been developed at a significant scale, despite reports from 62 wells showing evidence of geothermal gradients ranging from 20.8 °C/km to 48.7 °C/km in various...
Article
Full-text available
Non renewable energy sources in Bangladesh is severely limited. Mainly in the rural areas energy crisis and desertification problem is very acute. Thus, it is essential to find out the renewable energy resources as well as to improve the effective renewable energy technologies. Bangladesh is adorned with huge renewable energy capitals such as solar...
Article
Slaughterhouse/abattoir waste dumping has always been a key environmental task globally. Alongside, a huge amount of cost is associated with this dumping process. Slaughterhouse wastes can be converted into energy and hydrogen through proper scientific methodology and new technology. For example, 4.785 million L of chicken fat oil could generate ar...
Chapter
The rapid depletion of fossil fuels has prompted the upcoming generations to adopt alternative resources which are similarly efficient and could meet the soaring energy demand. Furthermore, being non-renewable in nature, having an adverse effect on the environment while burning and mining, the replacement of this outdated means of energy supplies w...
Article
Full-text available
The paper aims to study different aspects of liquid fuel production through pyrolysis from agricultural residues, MSW, and e-waste available in Bangladesh. The abundant production of various crops generates massive amounts of residue such as rice straw, wheat straw, rice husk, jute stick, and sugarcane bagasse in Bangladesh have great potential for...
Article
Full-text available
With the increasing trend of the urban population in Bangladesh, waste generation is also increasing. With 70% organic solid waste, the urban areas generate 23,688 tonnes of waste per day. This rapid enhancement in waste production has an adverse effect on landfill resources and the day-today lifestyle. In this regard adopting waste to energy techn...
Article
Full-text available
One of the biggest concerns of the present century is energy security and climate change. Further, studies suggest that there would be a huge lack of fossil fuels in near future. Moreover, in terms of cleaner production, the most popular and practiced way of power generation is renewable energy sources which are intermittent in nature, require larg...
Article
Researchers are looking for alternative energy sources, and biofuel from algae has a significant contribution as an alternative renewable fuel. This paper aims to evaluate fundamental running parameters (heat release rate, peak pressure, specific fuel consumption, and brake torque) and estimates the factors influencing nitrogen oxides (NOx) formati...
Article
Full-text available
Literature limited in scope regarding the incorporation of sustainability into engineering curriculum encouraged authors to look at the current approaches of universities to the integration of sustainability into university curricula. The main focus of this study is to evaluate the literature published and analyse the university secondary data (inf...
Article
Full-text available
Climate change and severe emission regulations in many countries demand fuel and engine researchers to explore sustainable fuels for internal combustion engines. Natural gas could be a source of sustainable fuels, which can be produced from renewable sources. This article presents a complete overview of the liquefied natural gas (LNG) as a potentia...
Article
Full-text available
Almost 80-90% of energy is wasted as heat (provides no value) in a photovoltaic (PV) panel. An integrated photovoltaic thermal (PVT) system can utilize this energy and produce electricity simultaneously. In this research, through energy and exergy analysis, a novel design and methodology of a PVT system are studied and validated. Unlike the common...
Article
Full-text available
This research is to investigate the performance and different parameters of implementing micro gas turbine (MGT) in range extender electric medium-heavy vehicle. In this paper, different software’s such as Simulink, Advisor and Virtual engine – gas turbine have been used for different sorts of investigation and validation. From the analysis, it is...
Article
Full-text available
This investigation explores the influence of oxygenated fuels on different energy and exergy parameters first and the second law of thermodynamics. The parameters were estimated based on the experimental data using thermodynamic Equations. Due to similar fuel properties to diesel, a Fischer–Tropsch fuel (FT100) was used as a base fuel (reference fu...
Conference Paper
Investigation into 4D printing has pulled in phenomenal enthusiasm since 2013 when the thought was first presented. 4D printing is an expansion of 3D imprinting wherein upgrades responsive dynamic smart materials are utilized to deliver the static structure. This static structure at that point changes over into another structure when it is presente...
Conference Paper
The different use of solar energy - solar heat, solar photovoltaic, solar thermal electricity, and solar fuels offer a clean, climate-friendly, very rich and in-exhaustive in-thorough energy asset to humanity. Photovoltaic panel uses solar light energy to produce electricity. This paper provides a comprehensive overview of an elective cooling metho...
Conference Paper
This research is to investigate the performance and different parameters of implementing micro gas turbine (MGT) in medium heavy vehicle. The maximum thermal efficiency of the proposed system is found almost 46%, which is better than other conventional systems. In this paper, several investigations are done on MGT for range extender using Simulink,...
Conference Paper
In this modern era, geothermal energy is vastly used for producing electricity and it is also a very interesting choice for Bangladesh for the sake of producing electricity. The paper mainly focuses on the production of electricity by using an efficient technique. Applying this process, the cost of producing electrical energy is comparatively low f...
Conference Paper
Full-text available
This paper portrays the benefits of introducing an ultracapacitor into a battery pack of an urban electric vehicle drive train. Simulations are done taking two basic scenarios into consideration: fresh cells and half-used battery cells. The simulations show that the lower the temperature higher the hybrid system efficiency. Data from real world are...
Article
Full-text available
This research is to investigate the various parameters and conditions of implementing solar and wind energy in engine driven three wheelers. No reliable study of using both these energies in three-wheelers is found in the literature so far. In this paper, a numerical study is conducted for using both these energies in a plugged-in hybrid three-whee...
Article
Nowadays the demand for reducing pollutant emissions and fuel consumption have paved the way of developing more fuel-efficient power generation system for transportation sector. Micro gas turbine (MGT) system can be an alternative to internal combustion reciprocating engine due to its light-weight and less fuel consumption. In this paper, some majo...
Article
Full-text available
In this paper, a decentralized low-cost water treatment plant is designed using empirical equations. From the analysis of water quality of Bangladesh, it is seen that the standard level of water quality is not maintained in Bangladesh. First, the primary treatment plant is designed including septic tank and anaerobic pond design. But only primary p...
Article
Full-text available
Background: Auto rickshaws are compact, three-wheeled vehicles which are normally used altogether in numerous Asian nations (i.e. China, Japan, Bangladesh, India, Pakistan and so forth) for transportation of people and products. The vehicles are little and have simple transportability in occupied Asian cities. In Bangladesh, auto rickshaws/simple b...
Article
In South-Asian region, Auto-rickshaw (electric/engine driven) is a well-known vehicle. Mostly in India and Bangladesh, people prefer auto-rickshaw for traveling small to medium distances.However, no reliable study has been conducted using both solar and wind energy in auto-rickshaw.This paper is basically a research on using both solar and wind ene...
Article
Full-text available
Waste water treatment is an important issue because of lessening water resources. The primary reason for waste water treatment process is to expel the different constituents of the polluting load: solids, natural carbon, supplements, inorganic salts, metals, pathogens and so on. In this paper, mainly decentralized method is considered as a solution...
Conference Paper
Full-text available
Auto-rickshaws are used thoroughly in Bangladesh, India, and Pakistan etc. countries for transportation of public and goods. The vehicles are small and narrow allowing for easy transportability in busy Asian metropolises. In Bangladesh, auto rickshaws/easy bikes commonly offer their taxi-services, as they are incredibly inexpensive to operate. Conc...
Conference Paper
Full-text available
Automobile rickshaws are small, three-wheeled vehicles which are being used thoroughly in many Asian countries (i. e. Bangladesh, India, Pakistan etc.) for the sake of transportation of public and goods. The vehicles are small and narrow allowing for easy transportability in busy Asian metropolises. In Bangladesh, auto rickshaws/easy bikes commonly...
Article
Full-text available
Water pollution is one of the significant dangers to general wellbeing in Bangladesh. Drinking water quality is inadequately overseen and checked. Bangladesh positions at number 86 among 142 countries with respect to drinking water quality. Drinking water sources, both surface and groundwater are debased with coliforms, harmful metals and pesticide...
Article
Full-text available
An inspection of signal processing approach in order to estimate underwater network cardinalities is conducted in this research. A matter of key prominence for underwater network is its cardinality estimation as the number of active cardinalities varies several times due to numerous natural and artificial reasons due to harsh underwater circumstanc...

Questions

Questions (7)
Question
I want to change the liquid property in TRACE/Relap5 model. Basically, I want to add nanofluid with water for simulating reflood/rewet.
Question
What is the minimum percentage of fatty acid required in FAME for producing biodiesel?

Network

Cited By