Mark G Flanner

• University of Michigan

Melting layers in the atmosphere signify where falling ice hydrometeors melt into raindrops, and can be identified by discernible radar signatures. Accurate detection of melting layers is crucial to improving quantitative precipitation estimation, weather forecasts, microwave communication, and aviation risk assessments in a changing climate. Tradi...

Rain‐on‐snow (ROS) events occur when rain falls on snowpack and can have substantial ecological and social impacts. During ROS events, liquid water in the snowpack can decrease the surface albedo, which contributes to the positive snow‐albedo feedback and further accelerates snowmelt. In a warming climate, the frequency and spatial coverage of ROS...

The Ice, Cloud, and Land Elevation Satellite‐2 (ICESat‐2) mission has collected surface elevation measurements for over 5 years. ICESat‐2 carries an instrument that emits laser light at 532 nm, and ice and snow absorb weakly at this wavelength. Previous modeling studies found that melting snow could induce significant bias to altimetry signals, but...

A significant portion of surface melt on the Greenland Ice Sheet (GrIS) is due to dark ice regions in the ablation zone, where solar absorption is influenced by the physical properties of the ice, light absorbing constituents (LACs), and the overlying crustal surface or melt ponds. Earth system models (ESMs) typically prescribe the albedo of ice su...

We enhance the Community Land Model (CLM) snow albedo modeling by implementing several new features with more realistic and physical representations of snow‐aerosol‐radiation interactions. Specifically, we incorporate the following model enhancements: (a) updating ice and aerosol optical properties with more realistic and accurate data sets, (b) ad...

We enhance the Community Land Model (CLM) snow albedo modeling by implementing several new features with more realistic and physical representations of snow-aerosol-radiation interactions. Specifically, we incorporate the following model enhancements: (1) updating ice and aerosol optical properties with more realistic and accurate datasets, (2) add...

As the third most important greenhouse gas (GHG) after carbon dioxide (CO2) and methane (CH4), tropospheric ozone (O3) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O3 in the Arctic, a rapidly warming and sensitive environment. At diffe...

Glacial algae blooms on the Greenland ice sheet darken the surface albedo, enhancing surface melt. Sentinel-3 data was the first to highlight the extent of these blooms, which are expected to become larger as climate changes. Here we propose a novel use of solar-induced chlorophyll fluorescence (SIF) data from TROPOMI to confirm the Sentinel-based...

A tighter integration of modeling frameworks for climate and air quality is urgently needed to assess the impacts of clean air policies on future Arctic and global climate. We combined a new model emulator and comprehensive emissions scenarios for air pollutants and greenhouse gases to assess climate and human health co-benefits of emissions reduct...

Snow grain size is an important metric to determine snow age and metamorphism, but it is difficult to measure. The effective grain size can be derived from spaceborne and airborne radiance measurements due to strong attenuation of near-infrared energy by ice. Consequently, a snow grain size inversion technique that uses hyperspectral radiances and...

As the third most important greenhouse gas (GHG) after CO2 and methane, tropospheric ozone (O3) is also an air pollutant causing damage to human health and ecosystems. This study brings together recent research on observations and modeling of tropospheric O3 in the Arctic, a rapidly warming and sensitive environment. At different locations in the A...

While carbon dioxide is the main cause for global warming, modeling short-lived climate forcers (SLCFs) such as methane, ozone, and particles in the Arctic allows us to simulate near-term climate and health impacts for a sensitive, pristine region that is warming at 3 times the global rate. Atmospheric modeling is critical for understanding the lon...

Accurate modeling of cryospheric surface albedo is essential for our understanding of climate change as snow and ice surfaces regulate the global radiative budget and sea-level through their albedo and mass balance. Although significant progress has been made using physical principles to represent the dynamic albedo of snow, models of glacier ice a...

Globally, CO2 and other long-lived greenhouse gas emissions are key components that affect climate, but some of the more shorter-lived air pollutants also either warm or cool the climate on timescales depending on the species. Therefore, emission reduction policies from a climate perspective need to take into account the net effect of multiple poll...

The Snow, Ice, and Aerosol Radiative (SNICAR) model has been used in various capacities over the last 15 years to model the spectral albedo of snow with light-absorbing constituents (LACs). Recent studies have extended the model to include an adding-doubling two-stream solver and representations of non-spherical ice particles; carbon dioxide snow;...

The Arctic atmosphere is warming rapidly and its relatively pristine environment is sensitive to the long-range transport of atmospheric pollutants. While carbon dioxide is the main cause for global warming, short-lived climate forcers (SLCFs) such as methane, ozone, and particles also play a role in Arctic climate on near-term time scales. Atmosph...

Accurate modeling of cryospheric surface albedo is essential for our understanding of climate change as snow and ice surfaces regulate the global radiative budget and sea-level through their albedo and mass balance. Although significant progress has been made using physical principles to represent the dynamic albedo of snow, models of glacier ice a...

The Snow, Ice, and Aerosol Radiative (SNICAR) model has been used in various capacities over the last 15 years to model the spectral albedo of snow with light-absorbing constituents (LAC). Recent studies have extended the model to include an adding-doubling two-stream solver and representations of non-spherical ice particles, carbon dioxide snow, s...

Clouds and blocking activity have been implicated as causes of increased Greenland Ice Sheet (GrIS) melt in the 21st century. Although Greenland blocks (i.e., long‐lasting, mostly stationary anticyclones) generally reduce cloud cover and move warm air over Greenland, the elevated GrIS perturbs air and moisture transport in complex ways, implying a...

Snow is an important climate regulator because it greatly increases the surface albedo of middle and high latitudes of the Earth. Earth system models (ESMs) often adopt two-stream approximations with different radiative transfer techniques, the same snow therefore has different solar radiative properties depending whether it is on land or on sea ic...

This study quantifies the impact of the inclusion of realistic surface spectral emissivity in the Sahara and Sahel on the simulated local climate and beyond. The surface emissivity in these regions can be as low as 0.6–0.7 over the infrared window band while close to unity in other spectral bands, but such spectral dependence has been ignored in cu...

Snow is an important climate regulator because it greatly increases the surface albedo of large parts of the Earth. Earth System Models (ESMs) often adopt 2-stream approximations with different radiative transfer techniques, the same snow therefore has different solar radiative properties depending whether it is on land or on sea ice. Here we inter...

Accelerating surface melt on the Greenland Ice Sheet (GrIS) has led to a doubling of Greenland's contribution to global sea level rise during recent decades. Black carbon (BC), dust, and other light-absorbing impurities (LAIs) darken the surface and enhance snowmelt by boosting the absorption of solar energy. It is therefore important for coupled a...

Significance The typical magnitude of coupled climate model biases is similar to the magnitude of the climate change that is expected on a centennial time scale. Using climate models for assessing future climate change therefore relies on the hypothesis that these biases are stationary or vary predictably. This hypothesis, however, has not been, an...

We implement a set of new parameterizations into the widely used Snow, Ice, and Aerosol Radiative (SNICAR) model to account for effects of snow grain shape (spherical vs. nonspherical) and black carbon (BC)–snow mixing state (external vs. internal). We find that nonspherical snow grains lead to higher pure albedo but weaker BC-induced albedo reduct...

We implement a set of new parameterizations into the widely used Snow, Ice, and Aerosol Radiative (SNICAR) model to account for effects of snow grain shape (spheri-cal vs. nonspherical) and black carbon (BC)-snow mixing state (external vs. internal). We find that nonspherical snow grains lead to higher pure albedo but weaker BC-induced albedo reduc...

Atmospheric iron affects the global carbon cycle by modulating ocean biogeochemistry through the deposition of soluble iron to the ocean. Iron emitted by anthropogenic (fossil fuel) combustion is a source of soluble iron that is currently considered less important than other soluble iron sources, such as mineral dust and biomass burning. Here we sh...

Surface longwave emissivity can be less than unity and vary significantly with frequency. However, most climate models still assume a blackbody surface in the longwave (LW) radiation scheme of their atmosphere models. This study incorporates realistic surface spectral emissivity into the atmospheric component of the Community Earth System Model (CE...

Greenhouse gas (GHG) additions to Earth's atmosphere initially reduce global outgoing longwave radiation, thereby warming the planet. In select environments with temperature inversions, however, increased GHG concentrations can actually increase local outgoing longwave radiation. Negative top of atmosphere and effective radiative forcing (ERF) from...

Frozen and unfrozen surfaces exhibit different longwave surface emissivities with different spectral characteristics ((Feldman et al. [2014]; Huang et al. [2016]), and outgoing longwave radiation and cooling rates are reduced for unfrozen scenes relative to frozen ones. Here, physically-realistic modeling of spectrally-resolved surface emissivity t...

General circulation models (GCMs) are extensively used to estimate the influence of clouds on the global energy budget and other aspects of climate. Because radiative transfer computations involved in GCMs are costly, it is typical to consider only absorption but not scattering by clouds in longwave (LW) spectral bands. In this study, the flux and...

Over the past few decades, the geographical distribution of emissions of substances that alter the atmospheric energy balance has changed due to economic growth and air pollution regulations. Here, we show the resulting changes to aerosol and ozone abundances and their radiative forcing using recently updated emission data for the period 1990–2015,...

The suites of numerical models used for simulating climate of our planet are usually run on dedicated high-performance computing (HPC) resources. This study investigates an alternative to the usual approach, i.e. carrying out climate model simulations on commercially available cloud computing environment. We test the performance and reliability of...

The Land Surface, Snow and Soil Moisture Model Intercomparison Project (LS3MIP) is designed to provide a comprehensive assessment of land surface, snow and soil moisture feedbacks on climate variability and climate change, and to diagnose systematic biases in the land modules of current Earth system models (ESMs). The solid and liquid water stored...

Over the past decades, the geographical distribution of emissions of substances that alter the atmospheric energy balance has changed due to economic growth and pollution regulations. Here, we show the resulting changes to aerosol and ozone abundances and their radiative forcing, using recently updated emission data for the period 1990–2015, as sim...

This study quantifies black carbon (BC) processes in three global climate models and one chemistry transport model, with focus on the seasonality of BC transport, emissions, wet and dry deposition in the Arctic. In the models, transport of BC to the Arctic from lower latitudes is the major BC source for this region. Arctic emissions are very small....

There is growing scientific and political interest in the impacts of climate change and anthropogenic emissions on the Arctic. Over recent decades temperatures in the Arctic have increased at twice the global rate, largely as a result of ice-albedo and temperature feedbacks. Although deep cuts in global CO2 emissions are required to slow this warmi...

The shortwave cryosphere radiative effect (CrRE) is the instantaneous influence of snow and ice cover on Earth's top-of-atmosphere (TOA) solar energy budget. Here, we apply measurements from the MODerate resolution Imaging Spectroradiometer (MODIS), combined with microwave retrievals of snow presence and radiative kernels produced from four differe...

The concentrations of sulfate, black carbon (BC) and other aerosols in the Arctic are characterized by high values in late winter and spring (so-called Arctic Haze) and low values in summer. Models have long been struggling to capture this seasonality and especially the high concentrations associated with Arctic Haze. In this study, we evaluate sul...

Cryosphere Radiative Effect (CrRE) is the instantaneous influence of snow- and ice-cover on Earth's top of atmosphere (TOA) solar energy budget. Here, we apply measurements from the Moderate Resolution Imaging Spectrometer (MODIS), combined with microwave retrievals of snow presence and radiative kernels produced from 4 different models, to derive...

Two important factors that control snow albedo are snow grain growth and presence of light-absorbing impurities (aerosols) in snow. However, current regional climate models do not include such processes in a physically-based manner in their land surface models. We improve snow albedo calculations in the Simplified Simple Biosphere (SSiB) land surfa...

The concentrations of sulfate, black carbon (BC) and other aerosols in the Arctic are characterized by high values in late winter and spring (so-called Arctic Haze) and low values in summer. Models have long been struggling to capture this seasonality and especially the high concentrations associated with Arctic Haze. In this study, we evaluate sul...

Two important factors that control snow albedo are snow grain growth and presence of light-absorbing impurities (aerosols) in snow. However, current regional climate models do not include such processes in a physically-based manner in their land surface models. We improve snow albedo calculations in the Simplified Simple Biosphere (SSiB) land surfa...

Light absorbing particles (LAP, e.g., black carbon, brown carbon, and dust) influence water and energy budgets of the atmosphere and snowpack in multiple ways. In addition to their effects associated with atmospheric heating by absorption of solar radiation and interactions with clouds, LAP in snow on land and ice can reduce the surface reflectance...

Black carbon (BC) in snow lowers its albedo, increasing the absorption of sunlight, leading to positive radiative forcing, climate warming and earlier snowmelt. A series of recent studies have used prescribed-aerosol deposition flux fields in climate model runs to assess the forcing by black carbon in snow. In these studies, the prescribed mass dep...

Black carbon (BC) in snow lowers its albedo, increasing the absorption of sunlight, leading to positive radiative forcing, climate warming and earlier snowmelt. A series of recent studies have used prescribed-aerosol deposition flux fields in climate model runs to assess the forcing by black carbon in snow. In these studies, the prescribed mass dep...

A state-of-the-art regional model, the Weather Research and Forecasting (WRF) model (Skamarock et al., 2008) coupled with a chemistry component (Chem) (Grell et al., 2005), is coupled with the snow, ice, and aerosol radiative (SNICAR) model that includes the most sophisticated representation of snow metamorphism processes available for climate stud...

While most general circulation models assume spectrally independent surface emissivity and non-scattering clouds in their longwave radiation treatment, spectral variation of the index of refraction of ice indicates that, in the far-IR, snow surface emissivity can vary considerably and ice clouds can cause non-negligible scattering. These effects ar...

Although the 2010 volcanic eruptions of Eyjafjallajökull did not exert a large climate forcing, several features of their emissions favored weaker aerosol cooling or stronger warming than commonly attributed to volcanic events. These features include a high ratio of fine ash to SO2, occurrence near reflective surfaces exposed to strong insolation,...

Quinn, P.K., A. Stohl, A. Baklanov, M.G. Flanner, A. Herber, K.Kupiainen, K.S. Law, J. Schmale, S. Sharma, V. Vestreng, and K. von Salzen, The Arctic, Radiative forcing by black carbon in the Arctic in “State of the Climate in 2013”, Bull. Amer. Meteor, Soc., 95 (7) S124 – 125, 2014.

Organic aerosols (OA) play an important role in climate change. However, very few calculations of global OA radiative forcing include secondary organic aerosol (SOA) or the light-absorbing part of OA (brown carbon). Here, we use a global model to assess the radiative forcing associated with the change in primary organic aerosol (POA) and SOA betwee...

Black carbon in snow (BCS) simulated in the Community Atmosphere Model (CAM5) is evaluated against measurements over Northern China and the Arctic, and its sensitivity to atmospheric deposition and two parameters that affect post-depositional enrichment is explored. Improvements in atmospheric BC transport and deposition significantly reduce the bi...

Though many global aerosols models prognose surface deposition, only a few models have been used to di- rectly simulate the radiative effect from black carbon (BC) deposition to snow and sea ice. Here, we apply aerosol de- position fields from 25 models contributing to two phases of the Aerosol Comparisons between Observations and Mod- els (AeroCom...

incorporate a new diagnostic called the cryosphere radiative effect (CrRE), the instantaneous influence of surface snow and sea ice on the top-of-model solar energy budget, into two released versions of the Community Earth System Model (CESM1 and CCSM4). CrRE offers a more climatically relevant metric of the cryospheric state than snow and sea ice...

climate model (Community Earth System Model with the Community Atmosphere Model version 5 (CESM-CAM5)) is used to identify processes controlling Southern Ocean (30-70°S) absorbed shortwave radiation (ASR). In response to 21st century Representative Concentration Pathway 8.5 forcing, both sea ice loss (2.6 W m-2) and cloud changes (1.2 W m-2) enhanc...

The global cycle of desert dust aerosols responds strongly to climate and human perturbations, and, in turn, impacts climate and biogeochemistry. Here we focus on desert dust size distributions, how these are characterized, emitted from the surface, evolve in the atmosphere, and impact climate and biogeochemistry. Observations, theory and global mo...

Though many global aerosols models prognose surface deposition, only a few models have been used to directly simulate the radiative effect from black carbon (BC) deposition to snow and sea-ice. Here, we apply aerosol deposition fields from 25 models contributing to two phases of the Aerosol Comparisons between Observations and Models (AeroCom) proj...

Significance The end of the Little Ice Age in the European Alps has long been a paradox to glaciology and climatology. Glaciers in the Alps began to retreat abruptly in the mid-19th century, but reconstructions of temperature and precipitation indicate that glaciers should have instead advanced into the 20th century. We observe that industrial blac...

Black carbon aerosol plays a unique and important role in Earth's climate system. Black carbon is a type of carbonaceous material with a unique combination of physical properties. This assessment provides an evaluation of black-carbon climate forcing that is comprehensive in its inclusion of all known and relevant processes and that is quantitative...

Black carbon aerosol plays a unique and important role in Earth's climate system. Black carbon is a type of carbonaceous material with a unique combination of physical properties. This assessment provides an evaluation of black-carbon climate forcing that is comprehensive in its inclusion of all known and relevant processes and that is quantitative...

As part of the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP), we evaluate the historical black carbon (BC) aerosols simulated by 8 ACCMIP models against observations including 12 ice core records, long-term surface mass concentrations, and recent Arctic BC snowpack measurements. We also estimate BC albedo forcing by perfo...

[1] Recent attention has focused on the impact of black carbon (BC) on Arctic climate. Here, idealized equilibrium climate experiments are conducted to explore the dependence of Arctic temperature change on the altitude and season of local BC forcing. BC residing in the lowest atmospheric layer produces very strong Arctic warming per unit mass and...

The Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP) examined the short-lived drivers of climate change in current climate models. Here we evaluate the 10 ACCMIP models that included aerosols, 8 of which also participated in the Coupled Model Intercomparison Project phase 5 (CMIP5). The models reproduce present-day total aer...

The transport of black carbon (BC) to polar regions is studied using the University of Michigan IMPACT aerosol model driven by two sets of meteorological fields from the NCAR CAM5 and GFDL AM3 models. The sensitivity of the transport of BC to wet deposition processes is tested by varying the wet deposition in large-scale precipitation. BC concentra...

As part of the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP), we evaluate the historical black carbon (BC) aerosols simulated by 8 ACCMIP models against observations including 12 ice core records, long-term surface mass concentrations and recent Arctic BC snowpack measurements. We also estimate BC albedo forcing by perfor...

A primary goal of the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP) was to characterize the short-lived drivers of preindustrial to 2100 climate change in the current generation of climate models. Here we evaluate historical and future radiative forcing in the 10 ACCMIP models that included aerosols, 8 of which also parti...

When contaminated by absorbing particles, such as refractory black carbon (rBC) and continental dust, snow's albedo decreases and thus its absorption of solar radiation increases, thereby hastening snowmelt. For this reason, an understanding of rBC's affect on snow albedo, melt processes, and radiation balance is critical for water management, espe...

Here we explore light absorption by snowpack containing black carbon (BC) particles residing within ice grains. Basic considerations of particle volumes and BC/snow mass concentrations show that there are generally 0:05-109 BC particles for each ice grain. This suggests that internal BC is likely distributed as multiple inclusions within ice grains...

A modal aerosol module (MAM) has been developed for the Community Atmosphere Model version 5 (CAM5), the atmospheric component of the Community Earth System Model version 1 (CESM1). MAM is capable of simulating the aerosol size distribution and both internal and external mixing between aerosol components, treating numerous complicated aerosol proce...

This paper reviews developments for the Community Land Model, version 4 (CLM4), examines the land surface climate simulation of the Community Climate System Model, version 4 (CCSM4) compared to CCSM3, and assesses new earth system features of CLM4 within CCSM4. CLM4 incorporates a broad set of improvements including additions of a carbon-nitrogen (...

Here we explore light absorption by snowpack containing black carbon (BC) particles residing within ice grains. Basic considerations of particle volumes and BC/snow mass concentrations show that there are generally 0.05–10⁹ BC particles for each ice grain. This suggests that internal BC is likely distributed as multiple inclusions within...

Absorbing aerosols are receiving increasing attention as forcing agents in the climate system. By scattering and absorbing light they can reduce planetary albedo, particularly over bright surfaces (clouds, snow and ice). They also act as cloud condensation and/or ice nuclei, influencing the brightness, lifetime and precipitation properties of cloud...

Arctic temperatures have increased at almost twice the global average rate over the past 100 years. Warming in the Arctic has been accompanied by an earlier onset of spring melt, a lengthening of the melt season, changes in the mass balance of the Greenland ice sheet, and a decrease in sea ice extent. Short-lived, climate warming pollutants such as...

Radiative processes play an important role on both global and regional scales. This study focuses on their effects over snow-covered surfaces, both clean and dust loaded. It is well understood that dust in snow enhances solar radiation absorption, leading to a decrease in snow albedo. However, the quantitative assessment of dust's influence on radi...

Here, we explore light absorption by black carbon (BC) particles mixed internally within snow grains, and quantify the absorption enhancement, relative to external mixing, associated with plausible ranges of BC concentrations and BC and ice particle sizes. Because snowpack ice grains typically have larger volume than BC particles by 9-13 orders of...

A modal aerosol module (MAM) has been developed for the Community Atmosphere Model version 5 (CAM5), the atmospheric component of the Community Earth System Model version 1 (CESM1). MAM is capable of simulating the aerosol size distribution and both internal and external mixing between aerosol components, treating numerous complicated aerosol proce...

Aerosols are suspensions of solid and/or liquid particles in the atmosphere and modify atmospheric radiative fluxes and chemistry. Aerosols move mass from one part of the earth system to other parts of the earth system, thereby modifying biogeochemistry and the snow surface albedo. This paper reviews our understanding of the impacts of aerosols on...

[1] The Community Land Model is the land component of the Community Climate System Model. Here, we describe a broad set of model improvements and additions that have been provided through the CLM development community to create CLM4. The model is extended with a carbon-nitrogen (CN) biogeochemical model that is prognostic with respect to vegetation...