Marianna Sledzinska

Catalan Institute of Nanoscience and Nanotechnology | ICN2 · Photonic and Phononic Nanostructures

Nanomaterials are driving advances in technology due to their oftentimes superior properties over bulk materials. In particular, their thermal properties become increasingly important as efficient heat dissipation is required to realize high-performance electronic devices, reduce energy consumption, and prevent thermal damage. One application where...

Since the raise of 2D materials, significant research has been dedicated to their strain-dependent electronic and mechanical properties. In this work, we studied exciton energies and low-frequency phonon modes in CVD-grown mono- and few-layer WS 2 transferred on PDMS micropillars. The modification of the band structure under strain was investigated...

Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric,...

We present a comparative investigation of the influence of crystallinity and film thickness on the acoustic and thermal properties of layered PtSe 2 films of varying thickness (1-40 layers) using frequency-domain thermo-reflectance, low-frequency Raman, and pump-probe coherent phonon spectroscopy. We find ballistic cross-plane heat transport up to~...

In the modern electronics overheating is one of the major reasons for device failure. Overheating causes irreversible damage to circuit components and can also lead to fire, explosions, and injuries. Accordingly, in the advent of 2D material-based electronics, an understanding of their thermal properties in addition to their electric ones is crucia...

Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric,...

Thin Films When thinning down silicon films toward nanometer thickness, their thermal conductivity decreases dramatically. In article number 2108352, Klaas‐Jan Tielrooij and co‐workers report a combined experimental–theoretical study that shows that this is not the case for the layered semiconductor MoSe2. For the thinnest MoSe2 films, the decreasi...

Understanding heat flow in layered transition metal dichalcogenide (TMD) crystals is crucial for applications exploiting these materials. Despite significant efforts, several basic thermal transport properties of TMDs are currently not well understood, in particular how transport is affected by material thickness and the material's environment. Thi...

We present a comparative investigation of the influence of crystallinity and film thickness on the acoustic and thermal properties of 2D layered PtSe2 thin films of varying thickness (0.6-24 nm) by combining a set of experimental techniques, namely, frequency domain thermo-reflectance, low-frequency Raman and pump-probe coherent phonon spectroscopy...

The degree of thermal anisotropy affects critically key device-relevant properties of layered two-dimensional materials. Here, we systematically study the in-plane and cross-plane thermal conductivity of crystalline SnSe2 films of varying thickness (16–190 nm) and uncover a thickness-independent thermal conductivity anisotropy ratio of about ∼8.4....

State-of-the-art fabrication and characterisation techniques have been employed to measure the thermal conductivity of suspended, single-crystalline MoS 2 and MoS 2 /hBN heterostructures. Two-laser Raman scattering thermometry was used combined with real time measurements of the absorbed laser power. Measurements on MoS 2 layers with thicknesses of...

Understanding thermal transport in layered transition metal dichalcogenide (TMD) crystals is crucial for a myriad of applications exploiting these materials. Despite significant efforts, several basic thermal transport properties of TMDs are currently not well understood. Here, we present a combined experimental-theoretical study of the intrinsic l...

Many layered materials, such as graphene and transition metal dichalcogenides, can be exfoliated down to atomic or molecular monolayers. These materials exhibit exciting material properties that can be exploited for several promising device concepts. Thinner materials lead to an increased surface-to-volume ratio, with mono- and bi-layers being basi...

State-of-the-art fabrication and characterization techniques have been employed to measure the thermal conductivity of suspended, single-crystalline MoS2 and MoS2/hBN heterostructures. Two-laser Raman scattering thermometry was used combined with real time measurements of the absorbed laser power, which allowed us to determine the thermal conductiv...

Precise patterning of 2D materials into micro-and nanostructures presents a considerable challenge and many efforts are dedicated to the development of processes alternative to the standard lithography. In this work we show a fabrication technique based on direct electron beam lithography (EBL) on MoS 2 on polydimethylsiloxane (PDMS) substrates. Th...

Optomechanical crystal cavities (OMC) have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, bacteria and viruses. In this work we demonstrate the working principle of OMCs operating under ambient conditions as a sensor of submicrometer particles by optically monitoring the frequency shift of thermally...

In this study, we use transient thermal gratings—a non-contact, laser-based thermal metrology technique with intrinsically high accuracy—to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 120 nm and 250 nm, respectively. We compare the experimental results with ab...

Optomechanical crystal cavities have rich perspectives for detecting and indirectly analysing biological particles, such as proteins, bacteria and viruses. In this work we demonstrate the working principle of an optomechanical crystal cavity operating under ambient conditions as a sensor of submicrometer analytes by optically monitoring the frequen...

A thermal rectifier/diode is a nonreciprocal element or system that enables preferential heat transport in one direction. In this work we demonstrate a single-material thermal diode operating at high temperatures. The diode is made of nanostructured silicon membranes exhibiting spatially and temperature-dependent thermal conductivity and, therefore...

The possibility of tailoring the critical strain of 2D materials will be crucial for the fabrication of flexible and stretchable devices. While crystalline MoS2 monolayer shows tensile strength comparable to the one of steel, in the polycrystalline MoS2 large concentration of defects and grain boundaries significantly degrades its mechanical proper...

We report on the structural, mechanical and thermal analysis of 40 nm thick polystyrene-block-poly (ethylene oxide) (PS-b-PEO) block copolymer (BCP) films coated with evaporated chromium layers of different thicknesses (1, 2 and 5 nm). Solvent annealing processes allow the structural control of the BCP films morphology by re-arranging the position...

In this study, we use the transient thermal grating optical technique--a non-contact, laser-based thermal metrology technique with intrinsically high accuracy--to investigate room-temperature phonon-mediated thermal transport in two nanoporous holey silicon membranes with limiting dimensions of 100 nm and 250 nm respectively. We compare the experim...

The possibility of tailoring the critical strain of 2D materials will be crucial for the fabrication of flexible devices. In this paper, the fracture in polycrystalline MoS2 films with two different grain orientations is studied at the micro- and nanoscale using electron microscopy. The critical uniaxial strain is determined to be approximately 5%...

Almost 15 years have gone ever since the discovery of graphene as a single atom layer. Numerous papers have been published to demonstrate its high electron mobility, excellent thermal and mechanical as well as optical properties. We have recently seen more and more applications towards using graphene in commercial products. This paper is an attempt...

The central concept in phononics is the tuning of the phonon dispersion relation, or phonon engineering, which provides a means of controlling related properties such as group velocity or phonon interactions and, therefore, phonon propagation, in a wide range of frequencies depending on the geometries and sizes of the materials. Phononics exploits...

In this work we study the effects of disorder on the thermal conductivity of porous 100 nm thick silicon membranes, in which the size, shape and position of the pores were varied randomly. Measurements using two-laser Raman thermometry on both non-patterned and porous membranes revealed more than a 10-fold reduction of the thermal conductivity comp...

We report measurements and Monte Carlo simulations of thermal conductivity of porous 100nm- thick silicon membranes, in which size, shape and position of the pores were varied randomly. Measurements using 2-laser Raman thermometry on both plain membrane and porous membranes revealed more than 10-fold reduction of thermal conductivity compared to bu...

While the dispersion of nanomaterials is known to be effective in enhancing the thermal conductivity and specific heat capacity of fluids, the mechanisms behind this enhancement remain to be elucidated. Herein, we report on highly stable, surfactant-free graphene nanofluids, based on N,N-dimethylacetamide (DMAc) and N,N-dimethylformamide (DMF), wit...

The performance gain oriented nano-structurisation has opened a new pathway for tuning mechanical features of solid matter vital for application and maintained performance. Simultaneously, the mechanical evaluation has been pushed down to dimensions way below one micrometre. To date, the most standard technique to study the mechanical properties of...

Heat conduction in silicon can be effectively engineered by means of sub-micrometre porous thin free-standing membranes. Tunable thermal properties make these structures good candidates for integrated heat management units such as waste heat recovery, rectification or efficient heat dissipation. However, possible applications require detailed therm...

We investigate the feasibility of activating coherent mechanical oscillations in lasing microspheres by modulating the laser emission at a mechanical eigenfrequency. To this aim, 1.5%Nd³⁺:Barium-Titanium-Silicate microspheres with diameters around 50 μm were used as high quality factor (Q > 10⁶) whispering gallery mode lasing cavities. We have impl...

We report a record low thermal conductivity in polycrystalline MoS2 obtained by varying grain sizes and orientations in ultrathin films. By optimizing the sulphurisation parameters of nanometre-thick Mo layer, we could grow MoS2 films with tuneable morphologies. The thermal conductivity is extracted from a Raman laser power-dependent study on suspe...

Transition from M=2 to M=1. The movie shows the transition between M=2 to M=1 plateaus through subsequent period doubling bifurcations.

Transition to chaos. The movie shows the transition from a coherent signal to a chaotic signal by just changing the laser wavelength. We sweep that magnitude back and forth a couple of times to illustrate the robustness of the system.

Supplementary Figures, Supplementary Discussion and Supplementary References

Studying thermal transport at the nanoscale poses formidable experimental challenges due both to the physics of the measurement process and to the issues of accuracy and reproducibility. The laser-induced transient thermal grating (TTG) technique permits non-contact measurements on nanostructured samples without a need for metal heaters or any othe...

Optical non-linearities, such as thermo-optic effects and free-carrier-dispersion, are often considered as undesired effects in silicon-based resonators and, more specifically, optomechanical (OM) cavities, affecting the relative detuning between an optical resonance and the excitation laser. However, the interplay between such mechanisms could als...

We report thermal conductivity measurements on 5 nm thick polycrystalline MoS2 by means of 2-laser Raman thermometry. The free-standing, drum-like MoS2 nanomembranes were fabricated using a novel polymer-and residue-free, surface-tension-assisted wet transfer, in which we took advantage of the hydrophobic properties of MoS2 to transfer the CVD-grow...

The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic an...

The effective thermal conductivity of sintered porous pastes of silver is modeled through two theoretical methods and measured by means of three experimental techniques. The first model is based on the differential effective medium theory and provides a simple analytical description considering the air pores like ellipsoidal voids of different size...

We report a technique for transferring large areas of the CVD-grown, few-layer MoS2 from the original substrate to another arbitrary substrate and onto holey substrates, in order to obtain free-standing structures. The method consists of a polymer- and residue-free, surface-tension-assisted wet transfer, in which we take advantage of the hydrophobi...

The analysis of diffracted light from periodic structures is shown to be a versatile metrology technique applicable to inline metrology for periodic nanostructures. We show that 10 nm changes in periodic structures can be traced optically by means of sub-wavelength diffraction. Polymer gratings were fabricated by electron beam lithography. The grat...

Free-standing Si films have been and remain an excellent example to study experimentally the effect of the reduction of the characteristic size on the phonon dispersion relation. A step further in geometrical complexity and, therefore, in increasing the control and manipulation of phonons is achieved by introducing periodicity in the medium to form...

Present silicon technology provides single crystal films and membranes with thicknesses on the order of 10 nm and below. Along the years, the thermal studies on such structures have shown a reduction of the thermal conductivity consistent with the decrease of the characteristic size. Although the lowering of thermal conductivity is detrimental for...

A detailed understanding of the connections of fabrication and processing to structural and thermal properties of low-dimensional nanostructures is essential to design materials and devices for phononics, nanoscale thermal management and thermoelectric applications. Silicon provides an ideal platform to study the relations between structure and hea...

Mass production of nanostructured surfaces relies on the periodic repetition of micrometre scale patterns. A unit cell with nanometre features in the micrometre size range is repeated thousands of times. The ensemble can used as a diffraction grating for visible light. The relative intensity distribution of the diffraction orders is characteristic...

We investigate experimentally and theoretically the acoustic phonon propagation in two-dimensional phononic crystal membranes. Solid-air and solid-solid phononic crystals were made of square lattices of holes and Au pillars in and on 250 nm thick single crystalline Si membrane, respectively. The hypersonic phonon dispersion was investigated using B...

Hypersonic, thermally activated surface acoustic waves propagating in the surface of crystalline silicon patterned with periodic stripes were studied by Brillouin light scattering. Two characteristic directions (normal and parallel to the stripes) of surface acoustic waves propagation were examined exhibiting a distinctive propagation behavior. The...

We report on a simple method to fabricate high-frequency nanotube mechanical resonators reproducibly. We measure resonance frequencies as high as 4.2 GHz for the fundamental eigenmode and 11 GHz for higher order eigenmodes. The high-frequency resonances are achieved using short suspended nanotubes and by introducing tensile stress in the nanotube....