Maria Anityasari

• Sepuluh Nopember Institute of Technology

This paper conducts system-dynamic simulation on farming eco-efficiency measurement completed with social aspects and interrelationship between indicators generated. It applies systemic eco-efficiency measurement methodology built by former research on five selected provinces in Indonesia. As constructed on the methodology, eco-efficiency ratio has...

Purpose Manufacturers and engineers need a practical and operational way to understand sustainable manufacturing and to apply it to their shop floors. The single index enables manufacturing industries to make decisions considering the continuous improvement to increase sustainability performance. The purpose of this paper is to develop a manufactur...

This paper proposes a methodology to develop life cycle - value stream mapping (LC-VSM) to evaluate sustainability using lean manufacturing approach. This new tool will analyze all activities in the life cycle perspective, including manufacturing, distribution, and post-used. The approach is validated through a mini case study in a beverage firm. T...

Nowadays, many cities are facing with complex issues such as climate change, social, economic, culture, and environmental problems, especially urban water. In other words, the city has to struggle with the challenge to make sure its sustainability in all aspects. This research focuses on how to ensure the city sustainability and resilience on urban...

In spite of being a large paddy and maize producer for the last decade, Indonesian farming has been suffering from high population, land conversion and low agricultural employment, which have been more daunting than environmental issues in achieving sustainability. They also arise in complex interrelationships, which create loops and cannot be mana...

Lean manufacturing tools do not consider environmental and societal benefits. The conventional value stream mapping (VSM) methodology examines the economics of a manufacturing line, most of which are in regards to time (cycle time, lead time, change-out time, etc.). Incorporating the capability to capture environmental and societal performance visu...

This paper presents a review of literature on extended VSM to enhance sustainable manufacturing. Literature review was done using two viewpoints. First, analyzed of the literature based on its research methods, research scope and the metrics used to measure sustainable manufacturing. Second, analyzed of the literature based on its contribution, its...

The rapidly growing urban population, the increasing impact of climate change, and the constantly decreasing availability of the good quality water become the major triggers that force urban water professionals to continuously focus on sustainable urban water management (SUWM). The city as a focal point of population growth in the world has become...

Sustainable food security measures how a region provides food for its people without endangered the environment. In Indonesia, it was legally measured in Food Security and Vulnerability (FSVA). However, regard to sustainable food security policy, the measurement has not encompassed the environmental aspect. This will lead to lack of environmental a...

The Herbal Center is one of the industrial centers supervised by Department of Trade and Industry in Surabaya. The center sells drinks and snacks which made from various natural Herbal plant. As the beginning of ASEAN Economic Community (AEC) in the end of 2015, Department of Trade and Industry has an initiative to transform the current center into...

There is no doubt that currently the use of electronic products and appliances has escalated tremendously in all over the world including Indonesia. This situation obviously also causes the increase of e-waste (electronic waste). Without proper treatment, e-waste will eventually cause environmental degradation as most of substances in electronic pr...

Green industry is becoming a hot issue all over the world. The basic principles of it are to minimize resources and emissions. Several developed and developing countries have obligated the implementation of green industry. Indonesian government also strives to implement the green industry principles by adding green industrial standards through the...

The objective of this paper is to present a multi-criteria decision model that can be used to evaluate alternatives of product design considering that an evaluator may have expertise in assessing an alternative design against a subset of criteria only. Comprehensive literature review leads us to the four aspects in evaluating a product design: cust...

Deplesi sumber daya alam yang sejalan dengan peningkatan populasi manusia, banyaknya sampah yang berbahaya sisa dari aktivitas manusia serta adanya fakta pemanasan global merupakan fakta yang meresahkan. Segala perilaku dan kegiatan manusia kini seharusnya berkiblat pada pemenuhan kebutuhan yang tidak mengorbankan kebutuhan generasi mendatang. Meng...

The objective of this research is to develop a product design methodology that accommodates three important aspects: modularization, life cycle design, and supply chain management.. These three aspects should be considered to ensure that a product design is efficient to realize, environmentally friendly, and creating sufficient variety that the mar...

Modularisasi adalah sebuah pendekatan untuk menyederhanakan produk dan proses yang kompleks dan membuatnya lebih efisien. Desain modular adalah unsur penting dalam proses perancangan siklus hidup produk. Perancangan siklus hidup merupakan kegiatan yang bertujuan untuk meminimalkan beban lingkungan. Contohnya, upgrade, reuse, remanufacture, dan recy...

Modularization has been used mostly in order for the management of complex systems to be simplified. In this paper we present the integrated of modular design and life cycle product design. In this work, we take a look at the current state of art in research in the area both of them. The integrated design methods will be reviewed in the case of the...

Over the past three decades, sustainable development has become an important and challenging issue around the world due to the deterioration of the environment, the scarcity of world resources, and the increasing level of pollution and waste processing costs. In respect to this issue, there is no doubt that industrial activities are considered as t...

Salah satu yang menjadi permasalahan kritis dalam lingkungan kompetisi pada supply chain saat ini adalah kemampuan untuk menghasilkan produk yang sesuai dengan keinginan dan spesifikasi tertentu dari customer dengan tetap mempertahankan service level customer dan mengendalikan cost. Sehingga perusahaan dituntut untuk memiliki kemampuan menghasilkan...

As reliability is critical to ensure market acceptance and economic feasibility of reused products, this paper proposes a methodology to determine a threshold value of reliability for reuse evaluation. The methodology is novel and can be integrated in some current models for assessing the technical reusability potential. Three different scenarios a...

In the reuse strategy the role of warranty to deal with quality uncertainty is critical to ensure market acceptance and the economic feasibility of reuse itself. However, up to now there are only a few studies investigating this role. This paper will elucidate the role of warranty in the reuse strategy by reviewing the functions of warranty and put...

The new manufacturing paradigm is one that values agility in product and process design, in order to cope with fast changing technological and economical environments. One more dimension also must be added to the equation, and this is the consideration of the environmental load imposed by the choice of the materials and processes of manufacturing....

In the field of sustainable manufacturing, reusing of old products or components is considered as the most environmentally friendly strategy among all other strategies. However, the decision of reusing old components of a used product confronts many uncertainties such as the quality level of the used components and the economic aspect of reusing th...

A call for 'doing more with less' is made to reduce the use of resources and energy along the life cycle of products. From this perspective, industries have to move forward from treating and minimizing waste and environmental impacts of production processes to product recovery strategies including recycling, remanufacturing, and reuse. As the most...

In the field of sustainable manufacturing, many research efforts have been focused on the redesign of products towards improved disassemblability and recyclability. However, recycling as an end-of-life (EOL) option is only the first step towards sustainable manufacturing. A more efficient strategy is the reuse of the components, sub-assemblies or e...

Quality and reliability are critical to ensure market acceptance and economic feasibility of reused products. Therefore, a proper assessment of quality and reliability is necessary to realize the reuse strategy. This paper proposes a generic methodology to assess quality and reliability including reliability analysis, threshold determination, and r...

Warranty is an agreement in which manufacturer will repair or replace a failed product under the warranty period. So, the warrant cost must be managed properly. But many manufacturers don't do that and they just imitate the other manufacturers warranty policy. Actually there were a lot of analysis and formulation that developed in determining the c...

ABSTRAK Permasalahan di dunia pendidikan di Indonesia adalah rendahnya tingkat penyerapan lulusan sebagai tenaga kerja. Sedangkan di dunia industri, terdapat permasalahan berupa rendahnya tingkat pemenuhan kebutuhan tenaga kerja. Diperlukan kebijakan penyelarasan antara dunia pendidikan dan dunia industri untuk mengatasi masalah di kedua sisi. Pada...

ABSTRAK Sustainable Manufacturing merupakan konsep yang menuntut perubahan pada sistem produksi pada industri manufaktur. Dalam penerapannya terdapat tiga strategi, yaitu reuse, remanufacturing, dan recycling. Ketiga strategi tersebut disebut juga item recovery. Ketepatan dalam penentuan keputusan recovery pada suatu item adalah sangat penting kare...

Abstrak Penelitian ini bertujuan untuk membuat model jaringan logistik untuk aktivitas pembongkaran kapal bekas (ship dismantling), dimulai dari proses pengadaan kapal hingga proses re-distribusi ke perusahaan manufaktur baja sebagai konsumen akhir dari bisnis ini. Model reverse logistics untuk kapal pada penelitian ini dibuat dengan berdasarkan pe...

Solid waste, called avfal, is one of environmental problems in ceramics industries. This waste comes from production process and triggers inefficiency. As part of cleaner production implementation, an effort to minimize avfal has been undertaken at PT. Keramik Paolo Probolinggo East Java by employing experimental design and response surface methodo...

ABSTRAK Badan Perencanaan dan Pembangunan Kota (Bappeko) Surabaya pada tahun 2010 merasa bahwa untuk meningkatkan kepuasan dari penduduk Surabaya terkait pelayanan publik adalah dengan meningkatkan kinerja para jajaran pegawai negeri sipil Kota Surabaya di bidang-bidang strategis, salah satunya di UPTD Terminal Purabaya. Berdasarkan permasalahan te...

Abstrak Recovery produk pada masa end of-life (EOL) merupakan hal yang penting untuk diperhatikan karena pembuangan produk akhir terutama yang bersifat non-biodegradable, membawa dampak lingkungan yang buruk. Terdapat tiga strategi pengolahan produk pada masa EOL dimana salah satunya adalah strategi penggunaan produk kembali (reuse). Reuse merupaka...

Abstrak Seiring dengan pertumbuhan ekonomi dan perkembangan teknologi yang begitu pesat di Indonesia, membuat gaya hidup dan pola konsumsi masyarakat menjadi semakin meningkat. Hal inilah yang menyebabkan para produsen mengubah media pemasaran serta semakin meningkatkan pelayanan mereka dengan menawarkan pilihan kustomisasi pada konsumen. Di sisi l...