Majid toghyani riziHakim Sabzevari University · Department of Electrical Engineering
Majid toghyani rizi
Phd
About
5
Publications
7,494
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
38
Citations
Citations since 2017
Introduction
Publications
Publications (5)
Optical and electrical features of Cu2O solar cells from simple primitive bufferless AZO/Cu2O to complex single/double layer-antireflection coating (S/DLARC) on back-surface fluorine-doped tin oxide (BSF/FTO), were numerically studied. The simulated cells were optimized using a low-conduction band offset buffer, controlled-defect BSF, and antirefle...
![Figure 1. A cylindrical capacitor [12].](profile/Mh-Shahrokh-Abadi/publication/318795002/figure/fig1/AS:522233810518016@1501521651892/A-cylindrical-capacitor-12_Q320.jpg)
Measurement of liquid level is an important process variable in the operation of many process industries such as water treatment plants. There are different types of level sensors to measure this parameter, categorized into ultrasonic, capacitive, optical, microwave, magnetostrictive, resistive chain, magnetoresistive, hydrostatic pressure, air bub...
![Table 1 . Electrical parameters of SOLKAR 36w PV module* [15].](profile/Majid-Toghyani-Rizi/publication/308904617/figure/tbl1/AS:668715607666700@1536445633950/Electrical-parameters-of-SOLKAR-36w-PV-module-15_Q320.jpg)
Questions
Questions (3)
Dear all
I have simulated a solar cell with azo/zno/cu2o structure by silvaco-atlas.The j-v characteristic is compatible with experimental data.But the problem is EQE or external quantum efficiency that is not compatible with experimental data.Does any body can help me about it?
I have designed a tandem cell with azo/zno/cu2o as a top cell and si-p/si-n as a bottom cell.Also I used vacuum as tunnel diode i.e my tandem cell structure is as follows:
azo/zno/cu2o/vacuum/si-p/si-n/aluminum Why the current in the bottom cell is much smaller than the top cell?
I designed a single cell but its efficiency is about 6 percent.
Projects
Projects (2)
