Magdalena Zięba

Silesian University of Technology

Polyhydroxyalkanoates (PHAs) are a family of polyesters produced by many microbial species. These naturally occurring polymers are widely used in tissue engineering because of their in vivo degradability and excellent biocompatibility. The best studied among them is poly(3-hydroxybutyrate) (PHB) and its copolymer with 3-hydroxyvaleric acid (PHBV)....

Polyhydroxyalkanoates (PHAs) are a family of polyesters produced by many microbial species. These naturally occurring polymers are widely used in tissue engineering because of their in vivo degradability and excellent biocompatibility. The most well-studied among them is poly(3-hydroxybutyrate) (PHB) and its copolymer with 3-hydroxyvaleric acid (PH...

Titanium dioxide (TiO2) thin films prepared by the sol–gel technique have been shown to be optically isotropic and, unlike the films obtained by competitive methods, do not exhibit measurable birefringence. A series of submicrometer-thin titanium dioxide films were prepared using the sol–gel technique and then thermally annealed at different temper...

Comprehensive studies on SiOx:TiOy composite waveguide layers with a high refractive index (n=1.8), synthesized through sol-gel and dip-coating techniques are presented. The layers' structural and microchemical properties are determined using methods with different spatial resolutions (nm/μm/mm) and information depths (surface/bulk): optical transm...

Delivery systems for biologically active substances such as proanthocyanidins (PCANs), produced in the form of electrospun nonwoven through the electrospinning method, were designed using a polymeric blend of poly(L-lactide-co-glycolide) (PLGA)and poly[(R,S)-3-hydroxybutyrate] ((R,S)-PHB). The studies involved the structural and thermal characteris...

Delivery systems of the biologically active substance such as proanthocyanidins (PCAN) produced through the electrospinning method were designed using a blend of poly(L-lactide-co-glycolide) and poly[(R,S)-3-hydroxybutyrate]. The research involved the structural and thermal characteristics of the developed electrospun three-dimensional fiber matrix...

Zinc oxide layers on soda-lime glass substrates were fabricated using the sol-gel method and the dip-coating technique. Zinc acetate dihydrate was applied as the precursor, while diethanolamine as the stabilizing agent. This study aimed to determine what effect has the duration of the sol aging process on the properties of fabricated ZnO films. Inv...

Composite silica-titania waveguide films of refractive index ca. 1.8 are fabricated on glass substrates using a sol-gel method and dip-coating technique. Tetraethyl orthosilicate and tetraethyl orthotitanate with molar ratio 1:1 are precursors. Fabricated waveguides are annealed at 500 °C for 60 min. Their optical properties are studied using ellip...

Presented herein are the results of a novel recycling method for waste Tetra Pak® packaging materials. The polyethylene (PE-T) component of this packaging material, obtained via a separation process using a “solvents method”, was used as a carbon source for the biosynthesis of polyhydroxyalkanoates (PHAs) by the bacterial strain Cupriavidus necator...

This paper investigates a highly attractive platform for an optical waveguide system based on silica-titania material. The paper is organized into two parts. In the first part, an experimental study on the development of an optical waveguide system is conducted via the sol-gel dip-coating method, and the optical characterization of the waveguide sy...

New trends towards development of integrated optics and miniaturization of photonic devices require fabrication of miniaturized photonic components. Fabrication of waveguiding films with designed optical properties is a fundamental process for production of planar integrated devices. We report here preparation of thin layers based on TiO2 precursor...

In this paper, we presented the technology of erbium-doped SiOx:TiOy films with different concentrations of erbium (0, 2, 4,6 wt.%) were fabricated using the sol-gel method and dip-coating technique. Tetraethyl orthosilicate (Si(OC2H5)4; TEOS) and titania (IV) ethoxide (Ti(OC2H5)4; TET) were used as precursors of silica, and titania, respectively....

This paper presents the results of research on a luminescent dye bound in a silica matrix. The new developed dye from the group of azaheterocyclic compounds was used: 3-(p-hydroxyphenyl)-1-phenyl-1H-pyrazolo [3,4-b]quinoxaline. The structure and composition of the dye was examined by 1HNMR, 13CNMR, FTIR, and elemental analysis. Its absorption and p...

Crack-free binary SiOx:TiOy composite films with the refractive index of ~1.94 at wavelength 632.8 nm were fabricated on soda-lime glass substrates, using the sol–gel method and dip-coating technique. With the use of transmission spectrophotometry and Tauc method, the energy of the optical band gap of 3.6 eV and 4.0 eV were determined for indirect...

The technologies of optical planar evanescent wave chemical and biochemical sensors require chemically resistant, high refractive index waveguide films having very good optical transmission properties. In this paper we present such two-compound SiOx:TiOy waveguide films fabricated by using the sol-gel method and the dip-coating technique. These fil...

This study describes the preparation, physicochemical characterization and the biological studies of the polymeric delivery systems of proanthocyanidins (PCAN) extracted from Pelargonium sidoides for the potential use as wound dressings. In this study 20 wt% PCAN demonstrated good antimicrobial activity against Staphylococcus aures, a gram-positive...

The natural polysaccharides are promising compounds for applications in regenerative medicine. Gellan gum (GG) is the bacteria-derived polysaccharide widely used in food industry. Simple modifications of its chemical properties make GG superior for the development of biocompatible hydrogels. Beside reversible cationic integration of GG chains, more...

This article reports the studies on bioactive (co)oligoesters towards their use as controlled delivery systems of p-anisic acid. The objects of the study were oligo[3-hydroxy-3-(4-methoxybenzoyloxymethyl)propionate], (p-AA-CH2-HP)n oligoester, and oligo[(3-hydroxy-3-(4-methoxybenzoyloxymethyl)propionate)-co-(3-hydroxybutyrate)] [(p-AA-CH2-HP)x-co-(...

Periodontitis (PD) is a chronic inflammatory disease of periodontal tissues caused by pathogenic microorganisms and characterized by disruption of the tooth-supporting structures. Conventional drug administration pathways in periodontal disease treatment have many drawbacks such as poor biodistribution, low selectivity of the therapeutic effect, bu...

Welding technology may be considered as a promising processing method for the formation of packaging products from biopolymers. However, the welding processes used can change the properties of the polymer materials, especially in the region of the weld. In this contribution, the impact of the welding process on the structure and properties of biopo...

The need for a cost reduction of the materials derived from (bio)degradable polymers forces research development into the formation of biocomposites with cheaper fillers. As additives can be made using the post-consumer wood, generated during wood products processing, re-use of recycled waste materials in the production of biocomposites can be an e...

In the investigation presented here the synthesis of new lariat ether derivative obtained from the modification of tetrapyrrolidinyl-PNP-crown ether macrocycle is described. The polyheterotopic molecular coreceptor consisted of the replacement of chlorine atoms with an optically active (S)-(1-benzylpyrrolidin-2-yl) methanamine. The structure was co...

This study investigated the molecular structure of the polyhydroxyalkanoate (PHA) produced via a microbiological shake flask experiment utilizing oxidized polypropylene (PP) waste as an additional carbon source. The bacterial strain Cupriavidus necator H16 was selected as it is non-pathogenic, genetically stable, robust, and one of the best known p...

It was shown that selected sodium phenoxide derivatives with different basicity and nucleophilicity, such as sodium p-nitrophenoxide, p-chlorophenoxide, 1-napthoxide, phenoxide and p-methoxyphenoxide, are effective initiators in anionic ring-opening polymerization (AROP) of β-butyrolactone in mild conditions. It was found that phenoxides as initiat...

Excessive levels of plastic waste in our oceans and landfills indicate that there is an abundance of potential carbon sources with huge economic value being neglected. These waste plastics, through biological fermentation, could offer alternatives to traditional petrol-based plastics. Polyhydroxyalkanoates (PHAs) are a group of plastics produced by...

In this study, low molecular weight poly(δ-valerolactone) (PVL) was synthesized through bulk-ring openings polymerization of δ-valerolactone with boric acid (B(OH)3) as a catalyst and benzyl alcohol (BnOH) as an initiator. The resulting homopolymer was characterized with the aid of nuclear magnetic resonance (NMR) and mass spectrometry (MS) techniq...

Application of new biodegradable polymer packaging based on polylactide (PLA), susceptible to organic recycling, can help in the waste reduction in landfills. In this paper, the results of the study on abiotic degradation of PLA and its blend containing 15 mol% of poly[(R,S)-3-hydroxybutyrate], as a model for the first step of organic recycling wer...

A general approach for the synthesis of 1-(N-acylamino)-1-triphenylphosphoniumalkylphosphonates from readily accessible alkyl imidate hydrochlorides has been developed. The three-step synthesis involves acylation of the imidate hydrochloride with an acyl chloride, the Michaelis–Becker-like addition of diethyl phosphite to the N–acylimidate and subs...

There is an increasing demand for bio-based polymers that are developed from recycled materials. The production of biodegradable polymers can include bio-technological (utilizing microorganisms or enzymes) or chemical synthesis procedures. This report demonstrates the corroboration of the molecular structure of polyhydroxyalkanoates (PHAs) obtained...

A selective heterogeneous reduction of natural PHB with lithium borohydride as a reducing agent has been described. Despite the method proceeding in a heterogeneous way, it allows obtaining hydroxyl terminated oligomers with low polydispersity, controlled average molecular weight, and defined end groups. The structure of resulting oligomers has bee...