Linda KandersIVL Swedish Environmental Research Institute · Organizations, products & processes
Linda Kanders
Doctor of Environmental Engineering
About
9
Publications
1,481
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
101
Citations
Publications
Publications (9)
The European Union's Environmental Technology Verification (ETV) program aims to foster innovative environmental technologies to reach the market and reassure potential users. This paper presents an investigation of using ETV for three technologies, being developed within the EU Zero Brine research and innovation project. The technologies were desi...
Background
This study examines the destiny of macromolecules in different full-scale biogas processes. From previous studies it is clear that the residual organic matter in outgoing digestates can have significant biogas potential, but the factors dictating the size and composition of this residual fraction and how they correlate with the residual...
To evaluate direct greenhouse gas emissions from Membrane Biological Reactor (MBR), measurements of nitrous oxide (N2O) and methane (CH4) were made at a pilot-scale MBR treating municipal wastewater Measurements were conducted during two campaigns with some changes in processes, i.e. introducing a pre-aeration tank in the second measurement, differ...
To be able to fulfill the Paris agreement regarding anthropogenic greenhouse gases, all potential emissions must be mitigated. Wastewater treatment plants should aim to eliminate emissions of the most potent greenhouse gas, nitrous oxide (N2O). In this study, these emissions were measured at a full-scale reject water treatment tank during two diffe...
Summary of key findings:
Nitrous oxide emissions on full-scale operation of reject water treatment on nitrogen will result in:
- Optimization of operation with regards to minimizing nitrous oxide emissions regarding the operation parameters; load, pH and aeration strategies by using design of experiments and the response surface methodology
- Co...
The deammonification process, which includes nitritation and anammox bacteria, is an energy-efficient nitrogen removal process. Starting up an anammox process in a wastewater treatment plant (WWTP) is still widely believed to require external seeding of anammox bacteria. To demonstrate the principle of a non-seeded anammox start-up, anammox bacteri...
In recent years, the anammox process has emerged as a useful method for robust and efficient
nitrogen removal in wastewater treatment plants (WWTPs). This paper evaluates a one-stage
deammonification (nitritation and anammox) start-up using carrier material without using anammox
inoculum. A continuous laboratory-scale process was followed by full-s...
Treating nitrogen-rich reject water from anaerobically digested sludge with deammonification has become a very beneficial side stream process. One common technique is the one-stage moving bed bioreactors (MBBRs), which in comparison with the other deammonification techniques can be started up without seeding anammox bacteria. This study investigate...
Based on results from many years of pilot plant experiments a one-stage deammonification process for treatment of supernatant from dewatering of digested sludge has been applied in a full scale at the Himmerfjärden wastewater treatment plant in the Stockholm region. The plant was
designed for nitrogen load of 480 kg d−1 and is based on the Moving B...