Leonardo Frizziero

• University of Bologna

Virtual reality (VR) technologies have shown significant potential in enhancing the automotive design process by providing immersive, interactive, and collaborative environments for reviewing complex vehicle architectures. Traditional CAD models and physical prototypes often struggle to offer the flexibility needed for rapid iteration and spatial u...

(1) Background: Orthopedic surgery has been transformed by 3D-printed personalized instruments (3DP-PSIs), which enhance precision and reduce complications. Hospitals are adopting in-house 3D printing facilities, using cost-effective methods like Fused Deposition Modeling (FDM) with materials like Polylactic acid (PLA) to create 3DP-PSI. PLA’s temp...

The paper focuses on the application of 3D printing technology in the medical field, particularly in cardiac surgery. Unlike traditional imaging techniques such as CT, MRI, and ultrasound, 3D printing offers a more detailed understanding and analysis of clinical cases. By using 3D printing, it becomes possible to study a patient’s specific cardiac...

The design of a product consists of several stages to be carried out in sequence until the result is achieved, some of them are performed trough the help of CAD software. This design step is very rigorous with as little margin for error as possible, and it often goes to make a clean break from other stages that precede it. On the other hand, virtua...

The concept of a novel sanitization device specifically designed for helmets used in bike share services is presented in this scientific work. The system uses ozone, a powerful oxidizing agent, to completely remove dust and bacteria from the helmet surface. Throughout the development process, special attention has been paid to the dual initial goal...

(1) Background: The adoption of Virtual Surgical Planning (VSP) and 3D technologies is rapidly growing within the field of orthopedic surgery, opening the door to highly innovative and individually tailored surgical techniques. We present an innovative correction approach successfully used in a child affected by “windswept deformity” of the knees....

In the contemporary automobile scene, environmental effect abatement is being increasingly sought; this demands a full rethinking of the entire system and entails more than just the reduction in exhaust pollutant emissions. Currently, the most popular approach is the electrification of automobiles, which significantly reduces pollution in major urb...

Design for Disassembly (DfD) and Augmented Reality (AR) have become promising approaches to improve sustainability, by providing efficient delivery and learning assets. This study combines DfD and AR to deliver a method that helps to streamline maintenance processes and operator training. It focuses on a common part in the process industry that req...

Due to ever-increasing technological acceleration leading to rapid changes in society and its needs, just as today's habits and needs turn out to be completely different from those of only a few years ago, likewise it is reasonable to assume that the same trend will continue in its growth path, making today's solutions rapidly obsolete as time pass...

Recent analysis has shown deteriorating traffic conditions in urban areas, caused by an increase in the motorization rate, which has risen to 66.6 vehicles per 100 inhabitants. As a result of the pandemic, individuality has grown, hence private vehicles are becoming more prevalent whilst public transport and sharing are negatively affected. Therefo...

Purpose The aim of this research is to enlighten the methodology model of Industrial Design Structure (IDeS) that integrates the internal and external customer feedback embodied both in methods of quality function deployment (QFD) and as basis of design for six sigma (DFSS) steps to systematically bring the information across the entire organizatio...

Urban mobility scenarios are constantly evolving, and today’s solutions may not be adequate in the future. Through innovative analysis and design methods encapsulated by the IDeS methodology, it is possible to plausibly hypothesize a number of key scenarios to be analyzed, for which vehicles can be designed in order to solve the main problems. Scen...

This paper is intended to offer a cue for optimizing a generic disassembly process for maintenance purposes. Through the use of a cutting-edge technology such as augmented reality, a key tool that makes it immediate to tell operators what they need to do, this can be made possible as never before within companies. A first aim of the work is to defi...

Complex deformities of lower limbs are frequent in children with genetic or metabolic skeletal disorders. Early correction is frequently required, but it is technically difficult and burdened by complications and recurrence. Herein, we described the case of a 7-year-old girl affected by severe bilateral genu varum due to spondyloepiphyseal dysplasi...

A deep research and analysis of a “critical waste” object has been carried out, understood as a subject that does not fare high on the separate collection and recycling system yet: the cigarette butt. This acknowledged social waste is the first among all the garbage detected everywhere around neighborhoods worldwide, and is therefore the epicenter...

This case study aims to develop a new innovative SUV (Sport Utility Vehicle) model exploiting IDeS (Industrial Design Structure), which is an engineering approach conceived to optimize car design projects in the automotive industry like never before. A compact SUV was chosen because it is a type of vehicle that is highly requested by customers, and...

This study is on the conception of the DS700 HYBRID project by the application of the Industrial Design Structure method (IDeS), which applies different tools sourced from engineering and style departments, including QFD and SDE, used to create the concept of a hybrid motorbike that could reach the market in the near future. SDE is an engineering a...

‘Repair’ in the design process of products can prolong the life cycle of parts: this is substantiated by a few examples that put this ideology into practice. Among many other products, home printers could be a good example, with huge numbers of printers ending up in landfill after a relatively short life; often due to blocked print heads that are e...

Torsional deformities of the lower limb are common in children with cerebral palsy (CP)-determining gait problems. The mechanisms underlying transverse plane gait deviations arise from a combination of dynamic and static factors. The dynamic elements may be due to spasticity, contractures and muscle imbalances, while the static ones may result from...

In this paper, industrial design structure (IDeS) is applied for the development of two new full-electric sports sedan car proposals that go by the names Blitz Vision AS and Retro. With a deep analysis of the trends dominating the automotive industry, a series of product requirements was identified using quality function deployment (QFD). The resul...

The following case study portrays the several steps required to conceive a product from scratch. The first step involves an in-depth analysis of today’s electric bicycle market in order to obtain data and information relating to the levels of innovation and comfort required by customers. Then, we evaluate the implementation of a useful method to un...

The present study was set to validate two different suburban-type sportscar bodies with shared common underpinnings. The chosen method to develop this project was the Industrial Design Structure (IDeS), which characterizes the ability to use the different innovative techniques known within the industrial field, across the whole organization. This m...

Many industrial technologies are developed to optimize products and bring innovation. In particular, the automotive sector is renewing itself according to the rules of green energy and consumption. This huge change requires a reinterpretation of the models on the market updating them to the present and the future needs of automotive industry. In th...

Due to ever-increasing technological acceleration leading to rapid changes in society and its needs, just as today's habits and needs turn out to be completely different from those of only a few years ago, likewise it is reasonable to assume that the same trend will continue in its growth path, making today's solutions rapidly obsolete as time pass...

Improvements in software for image analysis have enabled advances in both medical and engineering industries, including the use of medical analysis tools to recreate internal parts of the human body accurately. A research analysis found that FDM-sourced elements have shown viability for a customized and reliable approach in the orthopedics field. T...

The evolution of innovative and systematic design methodologies over time has widened the design concept involvement from the product development phase, which also includes the production and start-up phases. Literature findings have presented to accomplish a Generative Design (GD) approach through the application of an innovative method called Ind...

Fused Deposition Modeling (FDM) 3D printing is the most widespread technology in additive manufacturing worldwide that thanks to its low costs, finished component applications, and the production process of other parts. The need for lighter and higher-performance components has led to an increased usage of polymeric matrix composites in many fields...

Additive manufacturing processes have evolved considerably in the past years, growing into a wide range of products through the use of different materials depending on its application sectors. Nevertheless, the fused deposition modelling (FDM) technique has proven to be an economically feasible process turning additive manufacture technologies from...

This study shows an application of the Design for Six Sigma (DFSS) Methodology in the field of medical engineering. This research aims to demonstrate the application of a systematic design approach in the development of the “Ocane”, an innovative concept of smart cane for visually impaired patients which was thought of in answer to the end user’s n...

The design of an E segment, executive, midsize sedan car was chosen to fill a gap in the market of the Ford brand and to achieve the goal of innovation looking towards the future. Ford has not owned an E-segment flagship sports sedan for years, since the historic 1960s Falcon. Starting from the latter assumption and considering that the major car m...

Technology evolution and wide research attention on 3D printing efficiency and processes have given the prompt need to reach an understanding about each technique’s prowess to deliver superior quality levels whilst showing an economical and process viability to become mainstream. Studies in the field have struggled to predict the singularities that...

Three-dimensional printed custom cutting guides (CCGs) are becoming more and more investigated in medical literature, as a patient-specific approach is often desired and very much needed in today’s surgical practice. Three-dimensional printing applications and computer-aided surgical simulations (CASS) allow for meticulous preoperatory planning and...

This experimental study defines the usage of a computer-aided surgical simulation process that is effective, safe, user-friendly, and low-cost, that achieves a detailed and realistic representation of the anatomical region of interest. The chosen tools for this purpose are state-of-the-art Computer Aided Design (CAD) software for mechanical design,...

The study of CAD (computer aided design) modeling, design and manufacturing techniques has undergone a rapid growth over the past decades. In medicine, this development mainly concerned the dental and maxillofacial sectors. Significant progress has also been made in orthopedics with pre-operative CAD simulations, printing of bone models and product...

The present study aims to validate a new research method called IDeS (industrial design structure) through the design of an electric bicycle for everyday city life. IDeS is the latest evolution of a combination of innovative and advanced systematic approaches that are used to set a new industrial project. The IDeS methodology is sequentially compos...

The work carried out has the purpose of improving and optimizing various industrial technical operations, such as preventive maintenance, taken here as an example of application, using the Design for Disassembly (DfD) technique. Therefore, through four metaheuristic methods that have been chosen among the most widespread in the field (described bel...

This work aims to present an in-house low-cost computer-aided simulation (CASS) process that was recently implemented in the preoperative planning of complex osteotomies for limb deformities in children. Five patients admitted to the Unit of Paediatric Orthopaedics and Traumatology from April 2018 to December 2019, for correcting congenital or post...

In this work, a structured design method, the Stylistic Design Engineering (SDE), is applied for the construction of a new minivan car, in particular a new city car, which we will call FIAT 600 Omega. The SDE, or Stylistic Design Engineering, is a structured engineering method for carrying out automotive design projects. The SDE method consists of...

This work aims to analyze the characteristics and importance that design techniques for disassembly assume in the modern design phase of a mechanism. To this end, the study begins by considering a three-dimensional model of a gear motor, taken from the components of which the overall drawings are arranged and from the relief of those not available....

Design for Assembly is a strategy of design aimed at minimising product cost through design and process improvements. It led to a revolution in the manufacturing industry, resulting in reduced product costs, improved quality, shorter time to market, lower inventory, fewer suppliers and many other improvements. DFA is the method of design of the pro...

In an increasingly competitive business world, the “time to market” of products has become a key factor for business success. There are different techniques that anticipate design mistakes and launch products on the market in less time. Among the most used methodologies in the design and definition of the requirements, quality function deployment (...

The present study wants to bring to light a new type of crutch designed for a chronic patient with perennial limited mobility, who must use this support every time a move is needed. The main purpose of the project consists in recommending a correct use of the crutch through technology, limiting the damage normally caused by a bad use of crutches an...

This paper presents a a novel alghorithm of diagnosis and treatment of rigid flatfoot due to tarsal coalition. It introduces a workflow based on 3D printed models, that ensures more efficiency, not only by reducing costs and time, but also by improving procedures in the preoperative clinical phase. Since this paper concerns the development of a new...

Recently, the approach that defines the total life cycle assessment (LCA) and the end of life (EoL) in the early design phases is becoming even more promising. Literature evidences many advantages in terms of the saving of costs and time and in the fluent organization of the whole design process. Design for disassembly (DfD) offers the possibility...

The primary purpose of this work is to organize, in the best possible way, the design of an ecological transport vehicle, using an advanced design methodology, namely design for six sigma (DFSS). The DFSS is indeed a design approach, able to implement, in a logical and integrated way, other advanced methodologies of systematic design, such as quali...

Beginning from an analysis of all the top types of execution of the hoverboard, a contemporary vehicle for city transportation, inventive concepts were generated to design it. Quality-oriented methodology, just like Quality Function Deployment (QFD) for example, contributed the desires to start from, while through an innovation-oriented methodology...

Today’s market drives companies to change, adapt, and compete. Many consumers are increasingly looking at price, without sacrificing quality. In order to be attractive to the customer, companies must be able to offer the required quality at the lowest possible price. The life cycle of many products has been shortened compared to the past because no...

Our purpose is to develop the preoperative diagnosis stage for orthopedic surgical treatments using additive manufacturing technology. Our methods involve fast implementations of an additive manufactured bone model, converted from CAT data, through appropriate software use. Then, additive manufacturing of the formed surfaces through special 3D-prin...

In an increasingly competitive business world, the “time to market” of products has become a key factor for business success. There are different techniques that anticipate design mistakes and launch products on the market in less time. Among the most used methodologies in the design and definition of the requirements, quality function deployment (...

In an increasing number of aggressive enterprise world, “time to market” concerning products has come to be a solution element because of enterprise success. There are exceptional techniques so expect layout mistakes or open products concerning the need between much less time. Among the most used methodologies in the design and setting about stabil...

This paper presents the application of a low-cost 3D printing technology in pre-operative planning and intra-operative decision-making. Starting from Computed Tomography (CT) scans, we were able to reconstruct a 3D model of the area of interest with a very simple and rapid workflow, using open-source software and an entry level 3D printer. The use...

Both economic and environmental aspects significantly influence the design process since the early phases of preliminary design. The total Life Cycle Assessment (LCA) and the End of Life (EoL) of products have to be defined in the early design phases too but, for industrial products that are not feasible to automatic production, they are hard issue...

Featured Application After this work, we were able to check—with our own hands—the quality of the finished parts and the tensile strength, fall, and manipulation offered by the fusion of the material through MJF: we can therefore say that this type of process is very interesting in all those cases where it is necessary to prototypes characteristic...

The aim of this article is to apply some design methodologies to define, as a first objective, an optimized technical specification and then, as a second objective, to manage the transition from conceptual design to construction project of an innovative means of urban transport, meeting the needs of ‘renewable energy’ requirements, which then decli...

The aim of this work is to complete the QFD analysis carried out in a previous work that aimed to identify the main features that contribute to the success of a modern urban transport means: the hoverboard. Starting from this analysis, through the TRIZ methodology, resolutive principles have been identified for the realization of innovative solutio...

Opening from an examination of all the best features of accomplishment of the hoverboard, a modern vehicle for urban transport, we have created inventive ideas to design the transport means itself. Quality Function Deployment methodology has given us the requirements to start from, while the TRIZ methods have provided us the proposals and notions o...

The present work proposes a new approach for defining an interactive user manual in complex assemblies, using a new enabling technology of Industry 4.0, i.e. Augmented Reality. The AR environment supports the user in step-by-step assembly on-the-fly. The study of this method, suitable for the assembly of parts, is a stimulating engineering mission,...

The present paper begins a series of features considered essential to the success of an innovative means of transport in the cities: the hoverboard. These features are obtained from a previous QFD analysis and are the starting point for a further TRIZ analysis that aims to obtain innovative technical solutions, in order to manage the transition fro...