Khaled Ben Letaief

• Doctor of Philosophy
• Hong Kong University of Science and Technology

In the typical radio frequency (RF)-based wireless power transfer (WPT) system, the wireless power station (WPS) connected to the grid transmits energy to charge low-power sensors via radio signals. Such a system may not be green and also difficult to deploy in some special areas including deserts and mountainous areas, because it depends on the gr...

This letter investigates a reconfigurable intelligent surface (RIS)-aided multiple-input single-output (MISO) network with rate splitting multiple access (RSMA), where some specific applications serve paying users (PUs) while non-paying users (NUs) are regarded as potential eavesdroppers. An optimization problem is formulated to maximize the system...

This paper studies the high-speed railway mobile networks (HSRMN), where multiple railway-side sensors (RSs) are deployed along the track to sense environmental data, and multiple train-mounted sensors (TSs) are deployed on the train to collect train data. Both RSs and TSs are scheduled to transmit their sensed data respectively to the ground base...

This paper investigates rate-splitting multiple access (RSMA)-based visible light communication (VLC) networks with simultaneous lightwave information and power transfer (SLIPT). To effectively enhance the fairness among information decoding users (IDUs), we formulate an optimization problem to maximize the minimum data rate by optimizing the DC bi...

Recently, semantic communication (SC) has been regarded as one of the most potential paradigms of 6G. Current SC frameworks require the physical layer channel state information (CSI) in order to handle the severe signal distortion induced by channel fading. Since practical CSI cannot be obtained accurately and the overhead of channel estimation can...

This paper investigates the radio-frequency-energy-harvesting-powered (RF-EH-powered) wireless Industrial Internet of Things (IIoT) networks, where multiple sensor nodes (SNs) are first powered by a wireless power station (WPS), and then collect status updates from the industrial environment and finally transmit the collected data to the monitor wi...

As a distributed machine learning paradigm, federated learning (FL) is collaboratively carried out on privately owned datasets but without direct data access. Although the original intention is to allay data privacy concerns, "available but not visible" data in FL potentially brings new security threats, particularly poisoning attacks that target s...

Small-cell mobile edge computing (SE-MEC) networks amalgamate the virtues of MEC and small-cell networks, providing user devices (UDs) with lower-latency services and enhancing data processing capabilities. Nevertheless, time-varying wireless channels, dynamic UD requirements, and severe interference among UDs make it difficult to fully exploit the...

This paper investigates the age of information (AoI)-based online scheduling in multi-sensor wireless powered communication networks (WPCNs) for time-sensitive Internet of Things (IoT). Specifically, we consider a typical WPCN model, where a wireless power station (WPS) charges multiple sensor nodes (SNs) by wireless power transfer (WPT), and then...

This paper studies the energy-efficient cooperative base station (BS) switching-off in multi-input single-output (MISO) cellular networks, where the roaming-cost-based cooperation and the cooperative beamforming among multiple mobile network operators (MNOs) are jointly designed. To make the cooperation among MNOs practical, we introduce a new cons...

A multi-unmanned aerial vehicles (UAVs)-aided secure communication network is studied, where multiple information UAVs carrying temporary aerial base stations transmit confidential information to multiple authorized receivers (ARs), and a jammer UAV is employed to send artificial noise to multiple unauthorized receivers (URs) for mitigating informa...

This letter focuses on maximizing the energy efficiency (EE) for secure visible light communication (VLC) network with simultaneous lightwave information and power transfer (SLIPT) by optimizing the beamforming vectors and direct current (DC) bias under the constraints of the minimal rate requirement, the secure transmission requirement, the minima...

Radio frequency fingerprinting (RFF) is a promising device authentication technique for securing the Internet of things. It exploits the intrinsic and unique hardware impairments of the transmitters for RF device identification. In real-world communication systems, hardware impairments across transmitters are subtle, which are difficult to model ex...

Currently, reinforcement learning (RL) is widely used in wireless network optimization, where the key factor is to design the efficient reward functions manually. However, the limitations of the man-made reward function are mainly that it is subject to human subjective factors and requires extensive simulations to select appropriate parameters. To...

This article investigates the age of information (AoI) performance in a wireless powered communication network (WPCN), where a sensor node (SN) harvests energy from an energy transmitter (ET) and then transmits status information to its data receiver (DR) by using the harvested and accumulated energy. The AoI penalty is used as a performance metric...

This paper investigates simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-assisted downlink multi-user multiple-input single-output (MU-MISO) networks with the rate splitting multiple access (RSMA) scheme. A base station (BS) desires to simultaneously transmit messages to multiple users with the assistance of a...

Radio frequency (RF) fingerprinting is a promising device authentication technique for securing the Internet of Things. It exploits the intrinsic and unique hardware impairments of the transmitters for device identification. Recently, due to the superior performance of deep learning (DL)-based classification models on real-world datasets, DL networ...

This paper investigates simultaneous wireless information and power transfer (SWIPT)-enabled cell-free massive multiple-input multiple-output (CF-mMIMO) networks with power splitting (PS) receivers and non-orthogonal multiple access (NOMA). By exploiting the conjugated beamforming method, the closed-form expressions of the information rate and the...

With the sixth-generation (6G) vision of connecting everything, integrating real-time sensing, communication, computing, and control together in Internet of Everything (IoE) becomes essential to support intelligent services. Such a tendency is facing great challenges in terms of information freshness, energy sustainability, and energy efficiency (E...

This paper studies an intelligent reflecting surface (IRS)-assisted unmanned aerial vehicle (UAV) network, where the ground users (GUs) desire to receive information from a UAV. Downlink non-orthogonal multiple access (NOMA) is considered typically with two GUs being selected according to whether a Line of Sight (LoS) link between GUs and UAV exist...

In this article, we consider the timeliness of information transmissions in a three-node industrial wireless sensor network (IWSN) in terms of Age of Information (AoI). In this network, a sensor monitors the ambient environment and transmits the sensed information to a remote monitor directly or through a relay node. In particular, we are intereste...

With the rapid development of Internet-of-Things (IoT) technology and machine-type communications, various emerging applications appear in industrial productions and our daily lives. Among these, applications like industrial sensing and controlling, remote surgery, and automatic driving require an extremely low latency and a very small jitter. Deli...

With the rapid development of Internet-of-Things (IoT) technology and machine-type communications, various emerging applications appear in industrial productions and our daily lives. Among these, applications like industrial sensing and controlling, remote surgery, and automatic driving require an extremely low latency and a very small jitter. Deli...

Reliability is of paramount importance for the physical layer of wireless systems due to its decisive impact on end-to-end performance. However, the uncertainty of prevailing deep learning (DL)-based physical layer algorithms is hard to quantify due to the black-box nature of neural networks. This limitation is a major obstacle that hinders their p...

rgb0.00,0.00,0.00This letter studies the joint active and passive beamforming in intelligent reflecting surface (IRS)-enhanced wireless powered mobile edge computing (MEC) networks, in which a hybrid access point (HAP) is deployed to charge multiple wireless devices (WDs) and assist in computation of the offloaded tasks from the WDs. An IRS is depl...

The rapid advancement of artificial intelligence technologies has given rise to diversified intelligent services, which place unprecedented demands on massive connectivity and gigantic data aggregation. However, the scarce radio resources and stringent latency requirement make it challenging to meet these demands. To tackle these challenges, over-t...

As a promising integrated computation and communication learning paradigm, federated learning (FL) carries a periodic sharing from distributed clients. Due to the non-i.i.d. data distribution on clients, FL model suffers from the gradient diversity, poor performance, bad convergence, etc. In this work, we aim to tackle this key issue by adopting da...

In limited feedback multi-user multiple-input multiple-output (MU-MIMO) cellular networks, users send quantized information about the channel conditions to the associated base station (BS) for downlink beamforming. However, channel quantization and beamforming have been treated as two separate tasks conventionally, which makes it difficult to achie...

This paper studies a rotary-wing unmanned aerial vehicle (UAV)-assisted wireless powered fog computing network, where a UAV serves as both a mobile wireless energy source and a mobile fog server to provide charging and computing services to a group of ground sensors. The UAV first broadcasts radio frequency (RF) signals to charge the sensors, and t...

This paper studies the robust beamforming design for simultaneous wireless information and power transfer (SWIPT)-enabled networks, where the rate-splitting (RS) scheme and the power-splitting (PS) energy harvesting (EH) receiver are adopted for secure information transfer and EH, respectively. In order to explore the worst-case energy efficiency (...

This paper studies a simultaneous lightwave information and power transfer (SLIPT)-enabled multi-user (MU) multiple input single output (MISO) visible light communication (VLC) network, where multiple user equipments (UEs) are simultaneously allowed to receive information by the photodiode (PD) and harvest energy by the solar panel, respectively. T...

This paper investigates the energy-efficient coordinated beamforming design for multi-pair multiple-input single-output (MISO) networks with passive eavesdroppers. To be practical, it is assumed that only channel distribution information (CDI) of the network is known by the transmitters/sources, and the dynamic energy consumption model (DECM) is em...

The emerging Ultra-Reliable and Low-Latency Communication (URLLC) is expected to meet a hard or probabilistic delay constraint that plays a key role in Time Sensitive Networking (TSN) and Deterministic Networking (DetNet). In this paper, we are interested in simple bounds for delay-constrained wireless communications with deterministic or even rand...

Deep learning-based approaches have been developed to solve challenging problems in wireless communications, leading to promising results. Early attempts adopted neural network architectures inherited from applications such as computer vision. They often yield poor performance in large scale networks (i.e., poor scalability) and unseen network sett...

Unmanned aerial vehicles (UAVs) with huge-capacity batteries could be employed to wirelessly charge the ground sensor users (GSUs) and enhance the coverage of aerial wireless networks in outdoor Internet of Things (IoT). This paper investigates the information and energy coverage of UAV-enabled simultaneous wireless information and power transfer (...

Federated learning (FL) has emerged to jointly train a model with distributed data sets in IoT while avoiding the need for central data collection. Due to limited observation range, such data sets can only reflect local information, which limits the quality of trained models. In practical network, the global information and local observations alway...

Federated learning (FL) has recently emerged as an important and promising learning scheme in IoT, enabling devices to jointly learn a model without sharing their raw data sets. As FL does not collect and store the data centrally, it requires frequent model exchange through the wireless network. However, since the aggregation in FL can be partially...

In recent years, there has been a surge in applying deep learning to various challenging design problems in communication networks. The early attempts adopt neural architectures inherited from applications such as computer vision, which suffer from poor generalization, scalability, and lack of interpretability. To tackle these issues, domain knowle...

This paper proposes a multi-agent double deep Q network (DDQN)-based approach to jointly optimize the beamforming vectors and power splitting (PS) ratio in multi-user multiple-input single-output (MU-MISO) simultaneous wireless information and power transfer (SWIPT)-enabled heterogeneous networks (HetNets), where a macro base station (MBS) and seve...

The recently commercialized fifth-generation (5G) wireless communication networks achieved many improvements, including air interface enhancement, spectrum expansion, and network intensification by several key technologies, such as massive multiple-input multiple-output (MIMO), millimeter-wave communications, and ultra-dense networking. Despite the...

The conventional design of wireless communication systems typically relies on established mathematical models that capture the characteristics of different communication modules. Unfortunately, such design cannot be easily and directly applied to future wireless networks, which will be characterized by large-scale ultra-dense networks whose design...

This paper investigates a multi-user wireless powered fog computing (FC) network, where energy-limited wireless sensor devices (WSDs) first harvest energy from a nearby hybrid access point (HAP) and then, compute their tasks locally (i.e., the local computing (LC) mode) or offload the tasks to the HAP (i.e., the FC mode) via a binary offloading pol...

This article studies the unmanned aerial vehicle (UAV)-assisted wireless powered network, where a UAV is dispatched to wirelessly charge multiple ground nodes (GNs) by using radio frequency (RF) energy transfer and then the GNs use their harvested energy to upload the sensed information to the UAV. At each moment, the UAV is scheduled to charge the...

Graph convolutional networks (GCNs) have recently enabled a popular class of algorithms for collaborative filtering (CF). Nevertheless, the theoretical underpinnings of their empirical successes remain elusive. In this paper, we endeavor to obtain a better understanding of GCN-based CF methods via the lens of graph signal processing. By identifying...

In cell-free massive MIMO networks, an efficient distributed detection algorithm is of significant importance. In this paper, we propose a distributed expectation propagation (EP) detector for cell-free massive MIMO. The detector is composed of two modules, a nonlinear module at the central processing unit (CPU) and a linear module at the access po...

Channel estimation and beamforming play critical roles in frequency-division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems. However, these two modules have been treated as two stand-alone components, which makes it difficult to achieve a global system optimality. In this paper, we propose a deep learning-based approach that...

Over-the-air computation (AirComp) based federated learning (FL) is capable of achieving fast model aggregation by exploiting the waveform superposition property of multiple-access channels. However, the model aggregation performance is severely limited by the unfavorable wireless propagation channels. In this paper, we propose to leverage intellig...

This paper investigates the relay-assisted wireless information and power transfer enabled hybrid visible light communication (VLC)-radio frequency (RF) network, where a light emitting diode (LED) access point (AP) serves multiple information users (IUs) and multiple energy harvesting users (EHUs). IUs are allowed to receive information from the LE...

A UAV-aided wireless power transfer and data collection network is studied, where it is assumed that when the harvested energy at the sensor node (SN) cannot surpass its circuit activation threshold or the received data rate at UAV falls below a minimal required rate threshold, the information outage occurs. The closed-form expressions of energy ou...

Resource management plays a pivotal role in wireless networks, which, unfortunately, leads to challenging NP-hard problems. Artificial Intelligence (AI), especially deep learning techniques, has recently emerged as a disruptive technology to solve such challenging problems in a real-time manner. However, although promising results have been reporte...

In multi-service systems, multiple different age of information (AoI) penalty functions and corresponding algorithms are required to be deployed, which may result in high deployment complexity. Motivated by this, we propose a universal function f(t)=βeαt-β called α-β AoI penalty function to characterize different nonlinear forms of AoI penalty. Wit...

Over-the-air computation (AirComp) is a disruptive technique for fast wireless data aggregation in Internet of Things (IoT) networks via exploiting the waveform superposition property of multiple-access channels. However, the performance of AirComp is bottlenecked by the worst channel condition among all links between the IoT devices and the access...

As an emerging technique, mobile edge computing (MEC) introduces a new scheme for various distributed communication-computing systems such as industrial Internet of Things (IoT), vehicular communication, smart city, etc. In this work, we mainly focus on the timeliness of the MEC systems where the freshness of the data and computation tasks is signi...

Federated learning (FL) has recently emerged as an important and promising learning scheme in IoT, enabling devices to jointly learn a model without sharing their raw data sets. However, as the training data in FL is not collected and stored centrally, FL training requires frequent model exchange, which is largely affected by the wireless communica...

Federated learning (FL) is a promising and powerful approach for training deep learning models without sharing the raw data of clients. During the training process of FL, the central server and distributed clients need to exchange a vast amount of model information periodically. To address the challenge of communication-intensive training, we propo...

Intelligent reflecting surface (IRS) is a promising enabler for next-generation wireless communications due to its reconfigurability and high energy efficiency in improving the propagation condition of channels. In this paper, we consider a large-scale IRS-aided multiple-input-multiple-output (MIMO) communication system in which statistical channel...

In this paper, we investigate the decentralized statistical inference problem, where a network of agents cooperatively recover a (structured) vector from private noisy samples without centralized coordination. Existing optimization-based algorithms suffer from issues of model mismatch and poor convergence speed, and thus their performance would be...

Federated learning (FL) is a collaborative machine learning paradigm, which enables deep learning model training over a large volume of decentralized data residing in mobile devices without accessing clients' private data. Driven by the ever increasing demand for model training of mobile applications or devices, a vast majority of FL tasks are impl...

Federated learning is a collaborative machine learning framework to train deep neural networks without accessing clients' private data. Previous works assume one central parameter server either at the cloud or at the edge. A cloud server can aggregate knowledge from all participating clients but suffers high communication overhead and latency, whil...

Power-domain non-orthogonal multiple access (NOMA) has become a promising technology to exploit the new dimension of the power domain to enhance the spectral efficiency of wireless networks. However, most existing NOMA schemes rely on the strong assumption that users’ channel gains are quite different, which may be invalid in practice. To unleash t...

This paper investigates a multi-node wireless powered communication network (WPCN), where a hybrid access point (HAP) first charges an Internet of Thing (IoT) device wirelessly with the assistance of multiple selfish wireless nodes (WNs), and then the IoT device uses the harvested energy to transmit real-time status updates to the HAP. Two incentiv...

As an emerging technique, mobile edge computing (MEC) introduces a new processing scheme for various distributed communication-computing systems such as industrial Internet of Things (IoT), vehicular communication, smart city, etc. In this work, we mainly focus on the timeliness of the MEC systems where the freshness of the data and computation tas...

Deep learning has recently emerged as a disruptive technology to solve challenging radio resource management problems in wireless networks. However, the neural network architectures adopted by existing works suffer from poor scalability and generalization, and lack of interpretability. A long-standing approach to improve scalability and generalizat...

In this paper, we propose soft compression, an lossless compression approach to shape coding for images using location index and codebook of designed shapes with various sizes. This method is different from traditional image compression methods, as it aims at finding the basic shape blocks of pictures to improve the compression ratio from the persp...

Massive MIMO has been regarded as a key enabling technique for 5G and beyond networks. Nevertheless, its performance is limited by the large overhead needed to obtain the high-dimensional channel information. To reduce the huge training overhead associated with conventional pilot-aided designs, we propose a novel blind data detection method by leve...

This article investigates a multifog server (FS)-assisted nonorthogonal multiple access (NOMA)-based wireless powered network, where an energy-limited wireless device (WD) first harvests energy from a power transmitter (PT) and multiple helping FSs and then uses the harvested energy to partially offload its computing task to the FSs with NOMA for c...

Antenna selection is capable of reducing the hardware complexity of massive multiple-input multiple-output (MIMO) networks at the cost of certain performance degradation. Reconfigurable intelligent surface (RIS) has emerged as a cost-effective technique that can enhance the spectrum-efficiency of wireless networks by reconfiguring the propagation e...

This article investigates adaptive power control in wireless radio frequency energy harvesting (EH) femtocell heterogeneous networks (HetNets), where some EH devices desire to harvest energy from the signals transmitted from both macro base stations (BSs), and femtocell BSs. An optimization problem is formulated to maximize the sum capacity of femt...

We consider an Internet of Things (IoT) system in which a sensor observes a phenomena of interest with exponentially distributed intervals and delivers the updates to a monitor with random service times. At the monitor, the received updates are used to make decisions with deterministic or random intervals. For this system, we investigate the freshn...

Intelligent reflecting surfaces (IRSs) are revolutionary enablers for next-generation wireless communication networks, with the ability to customize the radio propagation environment. To fully exploit the potential of IRS-assisted wireless systems, reflective elements have to be jointly optimized with conventional communication techniques. However,...

This article investigates the unmanned aerial vehicle (UAV)-assisted wireless powered Internet-of-Things system, where a UAV takes off from a data center, flies to each of the ground sensor nodes (SNs) in order to transfer energy and collect data from the SNs, and then returns to the data center. For such a system, an optimization problem is formul...

Deep learning has recently emerged as a disruptive technology to solve challenging radio resource management problems in wireless networks. However, the neural network architectures adopted by existing works suffer from poor scalability, generalization, and lack of interpretability. A long-standing approach to improve scalability and generalization...

This paper investigates the wireless-powered hierarchical fog-cloud computing networks, where multiple energyconstrained users harvest energy from a hybrid access point (HAP) firstly and then use their harvested energy to offload their computation tasks to fog/cloud servers via the HAP or compute their tasks locally. To pursue multi-user fairness,...

Artificial intelligence (AI) has achieved remarkable breakthroughs in a wide range of fields, ranging from speech processing, image classification to drug discovery. This is driven by the explosive growth of data, advances in machine learning (especially deep learning), and the easy access to powerful computing resources. Particularly, the wide sca...

There are numerous scenarios in source coding where not only the code length but the importance of each value should also be taken into account. Different from the traditional coding theorems, by adding the importance weights for the length of the codes, we define the average cost of the weighted codeword length as an importance-aware measure of th...

There are numerous scenarios in source coding where not only the code length but the importance of each value should also be taken into account. Different from the traditional coding theorems, by adding the importance weights for the length of the codes, we define the average cost of the weighted codeword length as an importance-aware measure of th...