Kayode James Olaleye- Master of Science
- PhD Student at Wrocław University of Science and Technology
Kayode James Olaleye
- Master of Science
- PhD Student at Wrocław University of Science and Technology
About
18
Publications
4,438
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
23
Citations
Introduction
Current institution
Education
March 2020 - July 2021
October 2019 - February 2020
October 2012 - November 2017
Publications
Publications (18)
To design effective energy-absorbing shields made of modern composite materials (e.g., fibrous composite panels), it is necessary to use deformable materials whose important feature is the largest possible dissipation of impact energy. Rheological properties of these materials differ significantly from dissipative and elastic properties described b...
The shock wave resulting from the explosion process is the main burden on the technical infrastructure facilities or people in contact with the epicentre of the high explosive (HE). The article presents the tests of EN C45 steel pipe of 10 mm thickness buried beneath the earth as a result of the impulse load of the detonation wave of the explosive...
This article is devoted to research of the tribosynthesis mechanism of antifriction films and their influence on the functional properties of antifriction composites based on copper alloyed with nickel and molybdenum with the CaF 2 solid lubricant additions for operation at rotation speeds of 3,000–7,000 rph and increased loads of 3.0–5.0 MPa in ai...
Polyurethane (PU) has been used in a variety of industries during the past few years due to its exceptional qualities, including strong mechanical strength, good abrasion resistance, toughness, low-temperature flexibility, etc. More specifically, PU is easily “tailored” to satisfy particular requirements. There is a lot of potential for its use in...
In the paper, a design of experiment (DOE) in terms of the Taguchi method was used for the optimization of the manufacturing process. This approach makes it possible to do fewer experiments while still getting the desired outcomes. This research programme will use this tool to optimize the resin casting process by monitoring manufacturing parameter...
The potentials of CuZnAlNi shape memory alloys to serve as viable reinforcement in Aluminium matrix composites (AMCs) was investigated. The AMCs were double stir cast developed, containing 4, 6, and 8 wt% CuZnAlNi particles; and their structural characteristics and mechanical properties were compared with that of the unreinforced Al alloy and AMC c...
The paper is devoted to studying the chemical elements distribution in the material’s structure depending on the manufacturing technological parameters and their effect on properties of a new self-lubricating antifriction composite based on powder nickel alloy EP975 with CaF2 solid lubricant for operation at temperature 800 °C and loads up to 5.0 M...
This article presents the tests of EN C45 steel as a result of the impulse load of the detonation wave of the explosive charge. This process was carried out on a specially prepared test stand using a 75 g Tri-Nitro-Toluene (TNT) drilling cartridge. Two series of tests were carried out with the explosive charge placed in direct contact with the samp...
The present investigation aimed at evaluating the mechanical and corrosion performance of stir-cast ZA-27 based composites reinforced with stainless steel machining chips (SSMC), which is presumed offer to improve ductil-ity and toughness to the composite but it is unclear how it can affect the strength and the corrosion resistance. The results ind...
The rate and effects of accidents in Nigerian Production/Manufacturing industries are quite debilitating and consequently need mediation. The study appraised the safety programme of a food processing company XYZ with the aim of applying the Six Sigma methodology for improving safety. Evaluation of safety practices and investigations were made throu...
Plastics have been found to be useful all over the world. Its usage ranges from packaging to garbage bags, fluid containers, disposable fast food service items, and others. The disposal of plastics after their useful life poses great threat to both human and the environment because of their non-biodegradable nature. This has led to a search for alt...
This research technically aims at utilizing stone dust as reinforcement to check the mechanical properties of Al(6063) with different weight ratio of the reinforcement. The alloy consisting of 0, 2, 6 and 10 wt% of the reinforcements were produced using double stir casting method. Evaluation of the microstructure, percentage porosity check, measure...
This research technically aims at utilizing stone dust as reinforcement to check the mechanical properties of Al(6063) with different weight ratio of the reinforcement. The alloy consisting of 0, 2, 6 and 10 wt% of the reinforcements were produced using double stir casting method. Evaluation of the microstructure, percentage porosity check, measure...
