• Home
  • Jasurbek Gulomov
Jasurbek Gulomov

Jasurbek Gulomov
Andijan state university · Physics

Bachelor of Science
Scientific researcher in Renewable energy sources laboratory of Andijan state university in Uzbekistan.

About

130
Publications
33,532
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
100
Citations
Introduction
Additional affiliations
September 2019 - present
Andijan state university
Position
  • Laboratory Assistant
Description
  • I am programmer in this lab. I create solar cells model by Sentaurus and Silvaco TCAD. So, I currently create new digital modeling program!
Education
September 2017 - July 2021
Andijan state university
Field of study
  • Physics

Publications

Publications (130)
Article
Full-text available
Today, it has become an important task to modify existing traditional silicon-based solar cell factory to produce high-efficiency silicon-based heterojunction solar cells, at a lower cost. Therefore, the aim of this paper is to analyze CH 3 NH 3 PbI 3 and ZnO materials as an emitter layer for p-type silicon wafer-based heterojunction solar cells. C...
Article
Full-text available
One of important tasks of the day is increasing the efficiency and decreasing the cost of the silicon solar cells. There is method of introducing of metal nanoparticles into solar cells to improve its absorption and reduce transmission as well as reflection coefficients. When metal nanoparticles are introduced into silicon solar cell, nanoplasmonic...
Article
Full-text available
The paper considers a program for determining the plasmonic parameters of some metals using the least squares method based on experimental data. Analytical expressions are obtained for the real part of the dielectric function as a function of the wavelength of the incident light. It is found that in all metals at a wavelength of the incident light...
Article
Full-text available
Perovskite solar cells (PSCs) are a promising area of research among different new generations of photovoltaic technologies. Their manufacturing costs make them appealing in the PV industry compared to their alternatives. Although PSCs offer high efficiency in thin layers, they are still in the development phase. Hence, optimizing the thickness of...
Patent
Full-text available
Usage: lighting technology, lighting fixtures. Challenge: Protecting lighting device from directly falling external objects (bullets), increase energy efficiency, make optical parts reusable and reducing the recovery time of the device in case of damage. Essence of the utility model: device, contains a protective container and placed in it, a light...
Article
The efficiency of solar cells strongly depends on their thickness. Therefore, it is important to study the dependence of the photoelectric parameters of solar cells on the thickness. In the work, silicon solar cells with various pyramidal textures are chosen as objects of study, since they are most often used in industry. Silicon solar cells of thr...
Patent
Full-text available
Usage: semiconductor photoelectric converters of electromagnetic radiation. Task: development of a photovoltaic converter protected from the influence of the external environment with a mechanism of local mechanical pressure on a semiconductor wafer. Essence of the patent: the photoelectric converter contains a semiconductor wafer, a system with a...
Article
Full-text available
Сегодня основное внимание уделяется удовлетворению спроса на электроэнергию за счет возобновляемых источников энергии. Это связано с тем, что количество невозобновляемых источников энергии на земле сокращается, а их использование оказывает негативное влияние на окружающую среду.Полупроводниковые фотоэлектрические р-п-структуры в основном используют...
Conference Paper
Full-text available
Использование тонкослойных полупроводниковых материалов является одним из простых методов создания приборов, чувствительных к излучению ультрафиолетового диапазона. Такие приборы могут быть использованы в устройствах детектирования лазерного излучения, спектрофотометрии, в системах обнаружения пламени огня, медико- биологических исследованиях, а та...
Article
Full-text available
Increase in the efficiency and reduction of silicon consumption in production of solar cells are relevant problems. Designing two and three facial solar cells can be seen as a solution for such tasks. Compared to usual SC, the output power of two and three facial solar cells exceeds by 1.72 times by 2.81 times, respectively. Illumination of solar c...
Patent
Full-text available
Usage: laser radiation detection, spectrophotometry, flame detection systems, biomedical research. Task: increasing the photo-sensitivity of the detector, simplifying the design and manufacture, expanding functionality. The essence of the patent: the detector contains highly doped and low doped areas of the base and emitter, an anti-reflection film...
Patent
Full-text available
Usage: conversion of solar energy into electrical energy. Task: development of a converter with increased output voltage, enhanced functionality and improved energy and economic performance. Essence of patent: the converter contains an n- (or p-) base, a plurality of parallel p+ and n+ layers, metal contact electrodes for each p+ and n+ layer on th...
Article
Full-text available
It is important to study environmental effects on the properties of solar cells because solar cells are usually used in open environments. If the surface morphology of a solar cell changes, the angle of incident light will change depending on its photoelectric properties. So, in this paper, the photoelectric properties of silicon solar cells covere...
Article
Full-text available
Increase of the efficiency of the solar cells which are produced in industry, is important. Increase of efficiency of solar cells was identified, when nanoplasmonics phenomenon was formed in solar cell. So, in this article, influence of nanoparticles Pt, Au, Ag and Cu on properties of silicon based solar cell has been studied. When nanoparticle Pt...
Conference Paper
Full-text available
Studying the solar cells is one of the important researches. Because, demand of electricity is increased day by day. Now, there are many types of solar cells. However, in the industry, mainly, silicon solar cells are produced. According to the theoretical calculations, efficiency of silicon solar cells can be maximum 29 %. There are two main losses...
Conference Paper
Full-text available
Studying the solar cells is one of the important researches. Because, demand of electricity is increased day by day. Now, there are many types of solar cells. However, in the industry, mainly, silicon solar cells are produced. According to the theoretical calculations, efficiency of silicon solar cells can be maximum 29 %. There are two main losses...
Article
Full-text available
It is crucial to examine the dependence of photoelectric parameters of solar cells on the light incidence angle. In the present study, two solar cell models have been developed using the Sentaurus Technology Computer-Aided Design software package. The light spectrum AM1.5 has been directed on the frontal surface of solar cells at different angles....
Article
Full-text available
It is important to study the effect of light intensity on the main photoelectric parameters of silicon solar cell with various metal nanoparticles because the intensity of sunlight is variable. In this paper, the effect of Cu, Pt, Au, Ag, Ti, Al, Co nanoparticles on dependence of main photoelectric parameters of silicon solar cell on light intensit...
Article
Full-text available
The Sentaurus TCAD software package is widely used in the modeling of semiconductor optoelectronic devices. The main part of simulating solar elements is creating a correct geometric model. A geometric model can be built using the SDE module in two different ways, i.e. by writing code or using standard shapes in a graphical environment. Creating co...
Article
Full-text available
The most effective way to improve the optical properties of silicon-based solar cells is to form the textures on their surface. In this paper, the authors studied the influence of geometric sizes of periodical pyramidal textures, which are formed on the surface of a silicon-based solar cell, on its photoelectric properties. Through optics theories,...
Article
Full-text available
Методом цифрового моделирования исследовано влияние температуры на фотоэлектрические процессы в кремниевых солнечных элементах. Описана особенность программной системы "Sentaurus TCAD", которая позволяла моделировать кремниевые солнечные элементы с плоским р-n-переходом. В эмиттерный слой такого элемента внедрены наночастицы платины со средним разм...
Conference Paper
Full-text available
Bugungi kunda quyosh elementlarini foydali ish koeffitisenti oshirish uchun turli konstruksiyalar ishlab chiqilmoqda. Shokley Quessier nazariyasiga ko‘ra kremniy asosli quyosh elementining foydali ish koeffitsienti 29% dan oshmaydi. Lekin, sanoatda ishlab chiqarilayotgan kremniy asosli quyosh elementlarining foydali ish koeffitsienti taqriban 21% g...
Conference Paper
Full-text available
Axborot texnologiyalarining jadal rivojlanishi yarimo'tkazgichli mikroelektron asboblarni loyixalash va o'ganish uchun yangi usul-instrumental va texnologik modellashtirishni yaratilishiga olib keldi. So'ngi yigirma yil ichida yarimo'tkazgichli qurilmalar strukturalarini modellashtirish uchun keng tarqalgan raqamli texnologik platformalar paydo bo'...
Conference Paper
Full-text available
Nowadays, in exploring nanoparticles induced solar cells, a lot of programs are used. Commonly used programs among them are Sentaurus TCAD, Silvaco TCAD and Lumerical TCAD. We create new algorithm to model nanoparticles induced solar cells in Sentaurus TCAD. For modeling solar cells, Synopsys’s Sentaurus TCAD software has been used. The Sentaurus T...
Article
Full-text available
It is important to study the nature of the flexo-photovoltaic effect of silicon-based solar cells under the influence of local mechanical stresses. This is because it can change the properties of the solar cells and increase the efficiency of solar cell. In this paper, the effect of local mechanical stress on a monocrystalline silicon-based solar c...
Article
Full-text available
It is significant to improve the photoelectric parameters of thin-film silicon-based solar cells. There are some methods to enhance the optical and electrical properties of thin-film silicon-based solar cells. One of them is to insert various metal nanoparticles into a thin-film solar cell. Nanoparticles have an effect on the photoelectric paramete...
Presentation
Full-text available
This presentation was made for defence bachelor graduation thesis. In this presentation, a lot of information about solar cells and working principles. Besides, I give some good results which I found.
Patent
Full-text available
Полупроводниковое фотоэлектрическое устройство, включающее солнечную панель из солнечных элементов с фронтальной контактной сеткой, тыльным сплошным контактом, и охлаждающую пластину из пористого материала, отличающееся тем, что между тыльным сплошным контактом и охлаждающей пористой пластиной установлен плоский металлический контейнер-радиатор с п...
Article
Full-text available
In this work, the experimentally discovered effect of flexophotovoltaics (FFV) in silicon p-n structures under the influence of local mechanical stress on the front surface is theoretically justified for the first time. The regularities of the manifestation of the FFV effect are determined depending on the value of the local pressure force and the...
Conference Paper
Full-text available
The method of digital modelling investigates influence of temperature on photo-electric processes in silicon solar cells. Are calculated of the I-V characteristic of the solar cells containing platinum nanoparticles and without them at a variation of temperature in a range 250 - 350 K. Temperature factors of the basic photo-electric parameters of s...
Presentation
Full-text available
This presentation describes about digital modelling of influence of temperature on photo-electric processes in silicon solar cell.
Article
the method of digital modelling investigates influence of temperature on photo- electric processes in silicon solar cells. Feat ure of program system “Sentaurus TCAD” which allowed to model silicon solar cells with flat p- n-junction is described. Are calculated of the I-V characteristic of the solar cells containing platin um nanoparticles and wit...
Article
Full-text available
In this work, the first experimentally discovered effect of flexophotovoltaics (FPV) in silicon p-n-structures under the influence of local mechanical stress on the frontal surface is theoretically substantiated.. The regularities of the manifestation of the FPV effect are determined depending on the magnitude of the local pressure force and the in...
Article
Full-text available
Many properties of the solar cells are being studied extensively. In this study, the basic photoelectric parameters of vertical junction solar cell were modeled. Attempts were made to approach the scientific work both physically and programmatically. In terms of programming, a perfect algorithm has been developed for modeling vertical junction sola...
Article
Full-text available
We know the mechanical properties of silicon. However, little is known about the mechanical properties of silicon solar cells. Modeling is widely used in the study of solar cells. This article discusses in detail the effect of mechanical stress on solar cells. To do this, a model of the solar cell was created and simulated at Comsol Multiphysics. T...
Article
Full-text available
In this work, the experimentally discovered effect of flexophotovoltaics (FFV) in silicon p-n structures under the influence of local mechanical stress on the front surface is theoretically justified for the first time. The regularities of the manifestation of the FFV effect are determined depending on the value of the local pressure force and the...
Article
Full-text available
Quyosh elementlarini turlari juda ko’p. Ular ichida eng keng tarqalgani kremniy asosli quyosh elementidir. Kremniy asosli quyosh elementini foydali ish koeffitsientini orttirish, uning xususiyatlarini to’liqroq o’rganish maqsadga muvofiq. Chunki kremniy dunyoda eng keng tarqalgan elementlardan biri. Ushbu ishda kremniy asosli quyosh elementini opto...
Article
Full-text available
There are many types of solar cells. The most common of these is the silicon-based solar cell. To increase the efficiency of a silicon-based solar cell, it is advisable to study its properties in more detail. Because silicon is one of the most common elements in the world. In this article, the effect of nanoparticles on the opto-electrical properti...
Conference Paper
Full-text available
Ushbu maqolada vertikal o’qli aylanuvchi fotoelektrik energetik qurulmasining C# dastyrlash tilida hosil qilingan fizik modeli va u orqali olingan natijalar haqida ma’lumot berilgan.
Article
Full-text available
Nanotechnologies are entering every field. Nanoparticles have been widely used in medicine and technology. We decided to study the behavior of nanoparticles under the influence of light and its effects on solar cells, based on a number of properties. How gold and silver nanoparticles are introduced into the optical layer of the solar cell has been...
Article
Full-text available
This article provides a theoretical analysis of the mechanical and energy issues of a newly developed 3D rotating photovoltaic device. In addition, a 3D model of the photovoltaic device has been developed. Also, a digital modeling program has been developed to study the mechanical parameters and external influences on the surface temperature of a p...
Article
Full-text available
The article presents a theoretical analysis of the effect of gamma radiation on the kinetic characteristics and currentvoltage characteristics of silicon charge carriers of solar cells and the results obtained on the new national technological platform.
Article
Full-text available
One of the main factors influencing the efficiency of solar cells is their optical properties. So, most light is reflecting back and transmit through solar cell. This leads to a decrease in the efficiency. We know that the refractive index of silicon is 3-4 depending on the wavelength of light, and the refractive index of air is about 1. This cause...
Patent
Full-text available
When, we measure I-V characteristics of diode, solar cells and other semiconductor devices, we sure get non-linear graph. We can find a lot of physical properties of semiconductor devices using this graph. We create new program for automotive calculation all properties of that from I-V characteristics of semiconductor devices.
Patent
Full-text available
Differential and integral. It is for calculating some functions differential and integrals.
Article
Full-text available
The method of digital modeling investigates influence of temperature on photoelectric processes in silicon solar cells. Feature of program system describes “Sentaurus TCAD” which is allowed to model silicon solar cells with flat p-n-junction. Results of research are received in the form of visual pictures of processing of volume of silicon with p-n...