About
19
Publications
1,369
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
134
Citations
Introduction
Current institution
Additional affiliations
January 2018 - February 2021
February 2014 - October 2017
Education
February 2014 - June 2017
September 2009 - June 2011
September 2004 - June 2009
Publications
Publications (19)
In this paper, design studies for a 50 MWth Molten Salt Reactor (MSR) have been carried out for the eutectic point of the molten salt mixture. Neutronic calculations are performed with the 19.75% enriched uranium and 100% 7Li isotope contained. The MCNP6 nuclear code was used with the ENDF/B-VIII nuclear data library to determine geometry dimension...
This study presents a comprehensive assessment of the electricity crisis in the Gaza Strip and its impact on the health and well-being of its population. Using a sequential exploratory mixed-methods approach, both qualitative and quantitative data were collected from 350 households and key players institutions. The study reviewed the current state...
This study deals with TBR (Tritium Breeding Ratio) performance of the four different types of molten salt (FLiBe, FLiNaK, FLiNaBe, FLiNaRb) which has four different Li-6 enrichment ratios (0%, 30%, 60%, 90%) Moreover, two different vacuum vessel materials (SiC composite and V4Cr4Ti alloy) have been used in ARC reactor geometry. In models with TBR ≥...
The effect of enrichment of a low calorific (50 % CH4-50 % CO2) biogas mixture with hydrogen and oxygen has been investigated on combustion stability and exhaust emissions in a premixed burner. The thermal power was kept constant at 5 kW, the equivalence ratio of 0.8, and a swirl generator (1) was placed at the burner outlet. Initially, hydrogen (H...
In this study, the effects of changing first wall materials and their thicknesses on a reactor were investigated to determine the displacement per atom (DPA) and gas production (helium and hydrogen) in the first wall, as well as the tritium breeding ratio (TBR) in the coolant and tritium breeding zones. Therefore, the modeling of the magnetic fusio...
Synthetic gases attract the attention of researchers due to the increase in energy demand. H2 and CO gases are the main components of synthetic gases. In this study, three different gas mixtures were tested according to their H2/CO (3, 1.5, 0.5) ratios. Thermal power (3 kW), swirl number (1) and equivalence ratio (0.7) kept constants for all experi...
Pollutant emissions are one of the major problems for the World. In this regard, researchers focus on the studies on emission reduction. Hydrogen is an alternative solution for this problem. Hydrogen produces only water as a result of combustion with oxygen. Therefore, this study examines the combustion stability and emissions of a high hydrogen co...
The instability changes of oxygen-enriched fuel mixtures under acoustic enforcement in a premixed and swirl supported system were investigated in this study. Different amounts of hydrogen (0%, 10%, 20%) were added to methane used as fuel and oxygen enrichment process (21%, 24%, 26%) was applied in hydrogen-added fuel mixtures. The equivalence ratio...
In this paper, a biogas composition consisting of methane and carbon dioxide mixture in a pilot-scale model burner has been enriched with oxygen and the combustion characteristics including combustion stability and emission behaviour have been experimentally investigated. CH4 and CO2 gases have been burned as premixed and the blowout and flashback...
In this study, both pure fusion blanket and fusion‐fission (hybrid) reactor blanket performance were investigated and discussed separately in two phases. In the first phase, a Monte Carlo radiation damage analysis has been performed for stainless steel (SS304, SS316, and oxide dispersion strengthened (ODS)), molybdenum, vanadium, and tungsten as th...
Today, there are many different studies on increasing combustion efficiency and reducing flue gas emission values. In this study, H2 and CO have been added to 30% methane gas in a premixed laboratory scale model burner with high H2 / CO ratio (3) and medium (1.5). Swirl numbers (s = 0.6 and 1) have been changed by keeping the equivalent ratios cons...
This study aimed to investigate the numerical modelling parameters that are in good agreement with experimental data for the temperature distribution of a non-premixed swirling methane flame. All numerical calculations have been performed with FLUENT, a computational fluid dynamics code. P-1 radiation model has been chosen for all numerical calcula...
The aim of this paper is to determine neutronic performances of the light water reactor (LWR) spent fuel mixed with fertile thorium fuel in a FFHR. Time dependent three dimensional calculations for major technical data, such as blanket energy multiplication, tritium breeding ratio, cumulative fissile fuel enrichment and burnup have been performed b...
The aim of this study is to investigate tritium breeding ratio (TBR) and first wall material damage parameters such as displacement per atom (DPA), gas production of various coolants with Li2C2 tritium breeding material using the three different data libraries (ENDF/B.V, ENDF/B.VI and CLAW IV). Hence, FLiNaK, enriched (90% 6Li) natural lithium, lit...