
Guadalupe Vaca-MedinaFrench National Institute for Agriculture, Food, and Environment (INRAE) | INRAE · Laboratory of Agro-Industrial Chemistry, (LCA)
Guadalupe Vaca-Medina
PhD
Study of the role of water in the production of materials composed of natural polymers by thermomechanical processes
About
36
Publications
13,365
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
622
Citations
Publications
Publications (36)
The hot pressing process for 100% coriander-based fiberboards was optimized using an induction RocTool system, which offers rapid mold heating and cooling. The fiberboards were made using deoiled press cake as a protein binder and extrusion-refined straw as reinforcement. Doehlert’s experimental design was used to evaluate the influence of pressure...
The hot pressing process for 100% coriander-based fiberboards was optimized using an induction RocTool system, which offers rapid mold heating and cooling. The fiberboards were made with deoiled press cake as a proteic binder and extrusion-refined straw as reinforcement. A Doehlert’s experimental design evaluated the influence of pressure (10-50 MP...
This study was carried out to investigate the continuous aqueous pretreatment of sugarcane bagasse (SCB) through twin-screw extrusion for a new integrated full valorization, where the solid residue (extrudate) was used for the production of bio-based materials by thermocompression and the filtrate for the production of high-value-added molecules. T...
Large-scale strandings of Sargassum spp. seaweeds occur annually on the beaches of the Caribbean islands and cause major environmental, health, and economic problems. In order to support an approach of valorisation of algae, an exhaustive characterisation of the composition of these seaweeds has been performed by analysing the contents in alginates...
The aim of this study was to assess the influence of thermocompression conditions on lignocellulosic biomasses such as sugarcane bagasse (SCB) in the production of 100% binderless bio-based materials. Five parameters were investigated: pressure applied (7–102 MPa), molding temperature (60–240 °C), molding time (5–30 min), fiber/fine-particle ratio...
This research aims to valorize the by-products of tomato and red pepper processing underrated despite their richness in valuable compounds, essentially dietary fibers extracted from canning industry by-products using water as solvent. Therefore, varying operating conditions were tested on a laboratory scale, and the obtained fibers were characteriz...
The aim of this study was to assess the influence of thermocompression conditions on lignocellulosic biomass such as sugarcane bagasse (SCB) in the production of 100% binderless bio-based materials. Five parameters were investigated: pressure applied (7-102 MPa), molding temperature (60-240°C), molding time (5-30 min), fiber/fine particle ratio (0/...
Since 2010, huge quantities of Sargassum spp. algae have been proliferating in the Atlantic Ocean and stranding on Caribbean beaches, causing major economic, environmental, and health problems. In this study, an innovative high-density binderless particleboard was developed using uniaxial thermo-compression coupled with a cooling system. The raw ma...
Oil bodies, also called oleosomes have been the object of an increased interest since the last decade. Different processes of extraction and purification involve an aqueous crushing with methods to soften the cell membranes. An integrated process was used on different oilseeds to compare the different oil-body dispersions obtained. Once extracted w...
In order to valorize sugarcane bagasse as food packaging, 100% bio-based materials were produced by thermo-compression. The influence of molding conditions and water content of sugarcane bagasse were studied in relation to the density and mechanical properties of materials. Sugarcane bagasse was ground to pass through a 2-mm grid and the particle s...
An aqueous integrated process was developed to obtain several valuable products from sunflower seeds. With a high-shear rate crusher, high-pressure homogenization and centrifugation, it is possible to process 600× g of seeds in 1400× g of water to obtain a concentrated cream phase with a dry matter (dm) content of 46%, consisting of 74 (w/w dm) lip...
Bio-refining of algal biomass is currently considered as a key strategy to cut down the cost and improve the overall feasibility of algal-derived biodiesel. With that aim, in this study it was implemented a three-stage biorefinery process for the recovery of five differentiated bio-products from heterotrophically Chlorella protothecoides biomass. I...
This article describes an optical method based on the association of surface plasmon resonance (SPR) with chitosan (CS) film and its nanocomposites, including zinc oxide (ZnO) or graphene oxide (GO) for glyphosate detection. CS and CS/ZnO or CS/GO thin films were deposited on an Au chip using the spin coating technique. The characterization, morpho...
This study aims to investigate the effects of microwaves, ultrasonic and alkaline pretreatments on olive pomace properties and its biomethane potential. Alkaline pretreatment was found to reduce lipid and fiber contents (especially lignin) and to increase soluble matter. The alkali pretreatment at a dose of 8% (w/w TS) under 25 °C and for 1 day rem...
In this study, fiberboards were produced from shives collected after continuous fiber mechanical extraction from oleaginous flax straw. Fiberboards were produced through thermo-pressing, and their mechanical and thermo-mechanical properties were studied, as well as their water resistance. The influence of one pretreatment for shives and lignin addi...
Dans cette étude, des panneaux agglomérés de fibres ont été produits à partir d’anas collectés après extraction mécanique des fibres libériennes de paille de lin oléagineux. Les panneaux ont été mis en œuvre par thermopressage. Leurs propriétés mécaniques et thermo-mécaniques ont été étudiées ainsi que leurs comportements vis-à-vis de l’eau. L’infl...
Rapeseed oil cake (ROC) is a biomass of particular interest for biorefinery and food activities, due to its high protein, lignin, polyphenol and fiber contents. An environmental separation process combining ultrafine milling and electrostatic separation was recently developed for proteo-lignocellulosic plant fractionation. Several of the parameters...
In this study, fiberboards were produced from shives collected after continuous fiber mechanical extraction from oleaginous flax straw. Fiberboards were produced through thermo-pressing, and their mechanical and thermomechanical properties were studied, as well as their water resistance. The influence of two pretreatments for shives and lignin addi...
Poly(vinyl alcohol-co-ethylene) was compounded with 2e10% post-harvest tomato (PHT) plant powder and processed by single-screw extrusion to yield composite films. Upon increasing the filler content, the values of the mechanical properties indicators were found to decrease as follows: Young's modulus from 1797 to 750 MPa, stress at yield from 36 to...
Single-screw extrusion allows obtaining composite films containing poly(ethylene-co-vinyl alcohol), hereinafter EVOH, and water-soluble lignin-like biopolymers (SLP) isolated from the alkaline hydrolysate of two materials sampled from an urban waste treatment plant. During extrusion, a condensation reaction occurs between the EVOH and SLP. The prod...
Microscopic observation of sunflower meal before and after extraction indicated that extensive cellular disruption was achieved by extrusion, but that unextracted oil remained sequestered as coalesced oil within the void spaces of disrupted cotyledon cells. A full factorial design experiment was defined to develop aqueous extraction processing (AEP...
High-pressure molding at an elevated temperature was investigated as a potential technique for performing the esterification of octanoic acid and octanoic anhydride on cellulose and miscanthus. Emulsion, solvent exchange, and high-pressure homogenizer pretreatments were performed on the reactants in order to improve liquid-solid contacts. After pre...
Surface interactions play a key role in processes such as compression, granulation or storage. Determination of the amorphous or crystalline content at the surface of powders becomes then necessary. A powerful way of studying surface properties is based on the adsorption of an organic or water vapour on a powder. Nowadays, Inverse Gas Chromatograph...
The effect of temperature during cellulose compression has been studied using mechanical testing, particle size analysis, density and pressure–volume–temperature (PVT) measurements, crystallinity index, scanning electron microscope photographs and water sorption isotherms. Commercial cellulose powder samples with different crystallinity levels were...
Pressure–volume–temperature (PVT) measurements of α-cellulose with different water contents, were performed at temperatures from 25 to 180 °C and pressures from 19.6 to 196 MPa. PVT measurements allowed observation of the combined effects of pressure and temperature on the specific volume during cellulose thermo-compression. All isobars showed a de...
Oleosins are plant proteins associated with phospholipids in seed oil bodies. The ability of oleosins to aid in the emulsification and stabilization of oil bodies is well known, but little information is available on their interaction with phospholipids at the interface between oil bodies and aqueous medium. Oil body reconstitution at various phosp...
Isomalto-oligosaccharides and dextrans of controlled molecular weight of about 10 and 40 kDa were produced using a simple one-step process using engineered L. mesenteroides NRRL B-512F dextransucrase variants. Isomalto-oligosaccharides were produced in a 58% yield by the acceptor reaction with glucose, and reached a degree of polymerization of at l...
The present study focused on the shear-induced detachment of Saccharomyces cerevisiae in adhesive contact with a 316L stainless steel surface using a shear stress flow chamber, with a view to determining the respective influence of the yeast surface properties and the support characteristics. The effect of cultivation of S. cerevisiae yeast cells o...