
Franciszek Tomaszewski- Professor
- Poznań University of Technology
Franciszek Tomaszewski
- Professor
- Poznań University of Technology
About
81
Publications
7,623
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
230
Citations
Introduction
Skills and Expertise
Current institution
Publications
Publications (81)
The article presents a comprehensive method for using vibration signals to diagnose railway tracks. The primary objective is to gather detailed information on track conditions through a passive experiment. This involves using mobile diagnostic tools and techniques to assess railway infrastructure. The article elaborates on the range of diagnostic a...
The article presents the concept of an innovative approach to the production of a screw coupling system, a key element in rail vehicles. The use of ready-made components from various subsuppliers, combined with new quality control methods, offers an opportunity for a significant reduction in cost and production time while increasing the efficiency...
The article presents findings of a survey research carried out on a group of the deaf and the hard of hearing. The objective of the research was to evaluate the quality of public transport in urbanized areas in Poland, identify problems that the deaf and the hard of hearing face while using public transport, and to review a selection of solutions f...
The article presents the genesis of the work to develop a method of diagnosing a tram transmission from the track position using acoustic signals. Significant influence of the damaged gearbox on acoustic phenomena in the vicinity of a tram line was shown, especially visible changes in psychoacoustic indicators. Due to the nonstationary nature of th...
This chapter presents results of surveys conducted with blind people and analysed sound signals necessary in the development of the method of teaching spatial orientation to people with impaired vision. The survey was conducted to identify the most important problems faced by people with impaired vision living in a large urban agglomeration and to...
The article presents results and analysis of noise measurements in passenger compartments of public transport buses. Ten Solaris Urbino 12 m buses were selected for performing the measurements, including five buses with an automatic 4-speed transmission and five with a 6-speed transmission. The research related to the assessment of the acoustic cli...
The article presents a diagnostic and reliability model of an internal combustion engine that allows to assess the reliability status of the engine’s systems for a two-state model of operation and maintenance: functional – failed. The proposed diagnostic model is a qualitative-quantitative probabilistic model combining the reliability states of the...
The article presents the results of noise tests in 18 m Solaris Urbino public transport buses. In the passenger compartment of the tested vehicles, there were ten measuring microphones and a GPS device for measuring vehicle speed. These devices recorded speed and sound levels in the tested buses. The results of the measurements were used to assess...
The article discusses a preliminary concept of a method enabling the identification of chosen rail running surface defects, such as squats, spalling, and running surface defects, by analysing the parameters of vibration signals. It features a description of the methodology of the conducted tests, the scope thereof, and the selection of the measurem...
W artykule przedstawiono metodę identyfikacji wybranych wad powierzchni tocznej szyn takich, jak: squat, wada powierzchni tocznej i wybuksowanie, za pomocą parametrów sygnałów drganiowych. Opisano metodykę prowadzonych badań, zakres badań oraz wybór punktów pomiarowych z różnymi rodzajami wad. Przedstawiono wybrane wyniki badań drgań, wyniki analiz...
The article presents the functions of the relay valve and its place in brake systems of rail vehicles. The relay valve were divided according to their type, the structure and principle of their operation were discussed, and examples of rail vehicles and modules in which relay valves are installed are presented. Because of their function in braking...
The wheel-flat defect is one of the many issues decreasing the level of and comfort in light rail vehicles. The two main causes of wheel-flats are temporary or complete wheel blocking. The negative effect is the increase of the dynamic phenomenons in the wheel-rail interaction, which are impulsive in their nature. It could prove to be dangerous for...
The article will present a change in parameters of the acoustic climate around the Poznań section of the A2 motorway Komorniki - Krzesiny resulting from the increasing traffic volume due to opening of subsequent sections of this motorway. The acoustic conditions are a significant factor affecting peoples' lives in big urban agglomerations. It is co...
The work presents the concept of a freight tram and examples of trams used in European cities. The concept of a freight tram in Poznań and the Municipal Integrated Logistics Center that manages the delivery of goods to customers has been presented. The use of a freight tram in urban logistics requires from the city carrier a detailed plan for the d...
The article presents the problematic aspects of detection of flat places on tram wheels using time-frequency analysis of acoustic signals. A number of pass-by tests were conducted during real life exploitation. The objects of research are light rail vehicles exploited in Poznan. Some of them were characterized by flat places on tram wheels. The res...
W artykule przedstawiono przekładnik ciśnienia układów hamulcowych pojazdów szynowych oraz jego funkcje. Przekładniki ciśnienia z racji spełnianych funkcji w układach hamulcowych powinny charakteryzować się dużą niezawodnością oraz poprawnym wypełnianiem zadań w układzie hamulcowym pojazdów szynowych. Badania stanowiskowe przekładników ciśnienia wy...
The article discusses the methods of noise reduction in large cities and comments on the permissible city noise values specified in the Regulation of the Minister of the Environment. On the example of the city of Poznan, the actual values of the noise level in selected places and routes were presented. A brief history and contemporary projects of u...
W artykule zaprezentowano koncepcję innowacyjnego rozwiązania wagonu dla transportu standardowych naczep drogowych w ruchu kombinowanym. Przedstawiono koncepcje wagonu oraz mechanizmu obrotu przeznaczonego do poziomego, skośnego przeładunku naczepy na wagon. Rozwiązanie może stanowić alternatywę dla francuskiego systemu Modalohr, niemieckiego Cargo...
W poszukiwaniu optymalnego wykorzystania środków finansowych przedsiębiorstwa kolejowego (PKP PLK) oraz czasu planowania napraw torowisk stworzono model trwałości toru. Model w swych założeniach opiera się na parametrach techniczno–eksploatacyjnych linii kolejowej nr 131. W artykule przedstawiono dwa warianty procesu trwałości toru. Pierwszy warian...
Human quality of life is constantly increasing, and so does the comfort of travel by various means of public transport, especially rail transport. One of the more crucial criteria for assessment of travel comfort is vibroacoustic comfort. This aspect is also substantial among rail vehicle operators and manufacturers. Sound quality evaluation is rel...
Diagnostyka nawierzchni kolejowej jest istotnym elementem składowym czynników wpływających na poprawę stanu technicznego infrastruktury kolejowej w Polsce. Monitorowanie zmian zachodzących na powierzchni tocznej szyn jest bardzo ważnym elementem w kontekście poziomu bezpieczeństwa przewozów prowadzonych transportem szynowym. W artykule przedstawion...
In the recent years the directions of development of urban transport in European cities indicate development of tram systems. The consequence of growing trams participation in city traffic is a significant impact on the vibroacoustic climate of urbanized areas. The undesirable effects are the result of a dynamic interaction in tram-track system. Th...
The article presents a method of selecting diagnostic parameters which map the process of damaging the object. This method consists in calculating, during the observation, the correlation coefficient between the intensity of damage and the individual diagnostic parameters; and discarding of those parameters whose correlation coefficient values are...
Poziom zjawisk wibroakustycznych generowanych przez pojazdy samochodowe i kolejowe do środowiska jest zależny od wielu czynników. Są nimi np.: typ/rodzaj opon i nawierzchni, opór aerodynamiczny, konstrukcja pojazdu i jego stan techniczny. Dodatkowo impulsy dźwiękowe mogą pochodzić od uderzeń opon w znajdujące się na drodze przeszkody i infrastruktu...
In many cities in Poland, because of the lack of ring roads, the main traffic routes of state roads go through the cities affecting local and regional traffic. This causes high traffic and also many undesired effects for inhabitants such us environmental pollution with fumes, vibrations of buildings, high level of noise and increase of accidents.
T...
Dynamic development of internal combustion engines creates a need to adopt a strategy concerning operational use of these driving units based on the knowledge of their technical condition. The assessment of technical condition belongs to tasks of technical diagnostics.
This article presents an analysis of issues concerning vibration diagnostics of...
W artykule przedstawiono istotę działania układu hamulcowego oraz omówiono diagnostykę układów hamulcowych stosowanych w pojazdach szynowych i pojazdach samochodowych. Przeprowadzono analizę wypadków kolejowych i drogowych oraz zaprezentowano strukturę przyczyn ich powstawania z ukierunkowaniem na układ hamulcowy. Zaprezentowano i omówiono skutki w...
Abstract The article presents possibilities of use of vibration signal parameters for the evaluation of elements׳ clearance in the car suspension system. The time-spectrum analysis has been proposed to determine the frequency band connected with car body free vibration generated by impacts of suspension elements in case of clearance in suspension e...
W artykule, została podjęta analiza efektywności przeprowadzonej modernizacji pod względem poprawy wskaźników drgań mechanicznych. Ma ona na celu sprawdzenie, czy w trakcie prowadzenia modernizacji wagonów tramwajowych, dba się o przyszły komfort pasażerów. Całokształt prac polegał na wykonaniu badań narażenia na drgania pasażera w przedziale pasaż...
W artykule przedstawiono zakres stosowania przekładników ciśnienia dla poszczególnych pojazdów szynowych z rozbiciem na lokomotywy, wagony i jednostki trakcyjne. Przedstawiono opis przekładnika ciśnienia cylindrowego zaprojektowanego i wyprodukowanego przez Instytut Pojazdów Szynowych „TABOR”. Scharakteryzowano poszczególne elementy składowe jego b...
W artykule przedstawione zostaną wyniki pomiarów hałasu zarejestrowanego we wnętrzu wybranych typów pojazdów szynowych podczas jazdy. Ocenie poddano następujące pojazdy: lokomotywy elektryczne, wagony pasażerskie oraz wagony tramwajowe. Ponadto dokonano przeglądu aktualnych przepisów pranych z zakresu pomiaru i oceny hałasu generowanego przez szyno...
W artykule przedstawiono analizę możliwości wykorzystania nadzoru monitorowania drgań zespołów lokomotywy do bieżącej oceny ich stanu technicznego. Wskazano na zastosowanie modelu do prognozowania jako narzędzia do szacowania dalszej poprawnej pracy zespołu lokomotywy.
W artykule przedstawiono możliwości wykorzystania parametrów sygnału drganiowego do oceny luzu mocowania elementów zawieszenia do karoserii w samochodzie osobowym. Zaproponowano zastosowanie analizy widmowej sygnału drganiowego do określenia pasma częstotliwości związanego z drganiami własnymi nadwozia spowodowanymi przez uderzenia elementów zawies...
The article presents a new method for diagnosis of the wear of friction pads railway disc brake through analysis of the braking vibration during braking with the constant braking power and during braking to stop by making the analysis of signals in the frequency domain. At the time of research there are vibration acceleration generated by the calip...
The diagnostic testing of internal combustion engine can be made by using working processes and methods which take advantage of leftover processes. Working processes give information about general condition of internal combustion engine. Leftover processes give information about condition of particular subassemblies and kinematic couples; hence the...
Many methods of diagnosing internal combustion engines have been already
worked out. They can be divided into methods using working processes and
methods using leftover processes. Working processes give information
about general condition of internal combustion engine. Leftover
processes give information about condition of particular subassemblies...
Export Date: 20 April 2015, Correspondence Address: Tomaszewski, F.; Poznan University of Technology, Institute of Combustion Engines and Transport, Piotrowo 3, 60-965 Poznań, Poland; email: franciszek.tomaszewski@put.poznan.pl, References: Barczewski, R., (1992) Poliharmoniczna filtracja rekurencyjna-diagnostycznie zorientowana metoda analizy sygn...
Elaboration of a new method of teaching spatial orientation to blind and visually handicapped persons base on urban environment sounds was shown. Task 1 is a questionnaire inquiry on the problems of the blind moving in a big city. In Task 2 a preliminary selection and classification of the acoustic signals and vibrations that can be useful for spat...
W artykule przedstawiono analizę możliwości powiększenia przestrzeni ładunkowej zestawu bimodalnego przy zachowaniu obowiązującej skrajni kolejowej zgodnej z kodeksem UIC 505-1.
This article presents potential of modelling and predicting noise level
around the section of motorway A2 Komorniki - Krzesiny. The models were
worked out on the basis of sound levels registered in three stages of
research connected with phases of utilization of this motorway
(measurement of acoustic background without traffic, measurements after
o...
W opracowaniu zaprezentowano przepisy jakie spełniać powinny pojazdy poruszające się po torach kolejowych w Polsce. Zaprezentowano również systemy przewozu naczep na tle zintegrowanych jednostek ładunkowych.
This article presents results of research referring to applying selected frequency characteristics of signal of vibration accelerations of combustion engine’s head to assess valve clearance of combustion engine. The authors indicate necessity to perform preliminary preparations of signal of vibration accelerations before carrying out frequency anal...
This article presents results of research referring to applying selected point parameters of vibration signal to assess valve clearance of combustion engines. The authors indicate necessity to apply a complex process to prepare signal of vibration accelerations before making calculations of point parameters characterizing vibroacoustic signal in or...
In rail vehicles, because of higher and higher ride speeds, there are works carried out to upgrade braking systems to stop the vehicle at shortest possible braking distance. It is required that in braking systems the condition of friction set is periodically controlled and the wear of braking system parts is constantly monitored. The purpose of thi...
For blind and partially sighted people the most hindering live barrier is limitation of free moving. This may cause lack of self-esteem and restricts gaining life experience and knowledge. To minimize technical and social barriers encountered by blind people, education of spatial orientation of blind people is carried out. For this purpose there ar...
Efficient transportation in cities is not a new problem. In our agglomerations municipal transport operators use trams as major vehicles in citizen transportation system. In comparison with buses (witch are readily using in urban transport) a tram emit less pollutions (e.g. CO2, dust from tires⋯) and powering costs are not dependent on word-price o...
Poprawa stanu środowiska i jakości terenów zurbanizowanych oraz zapewnienie zdrowego środowiska życia mieszkańcom państw europejskich to główne cele założone przez organy Unii Europejskiej. Ważną rolę odgrywa w tym programie również walka z hałasem generowanym przez pojazdy szynowe. W artykule przedstawiono analizę metod szacowania poziomu hałasu o...
W artykule przedstawiono wyniki pomiarów hałasu wewnątrz wybranych tramwajów eksploatowanych w MPK Poznań. Pomiary przeprowadzono na postoju oraz w czasie jazdy na wybranych odcinkach torów podczas normalnego wykonywanego zadania transportowego. Otrzymane wyniki skonfrontowano z obowiązującymi normami i przepisami w zakresie dopuszczalnego poziomu...
W pracy przedstawiono sposób doboru punktów pomiaru sygnałów wibroakustycznych i wyboru informacyjnie efektywnych symptomów w oparciu o zbudowany model wibroakustyczny. Koncepcję zweryfikowano na przykładzie silnika spalinowego 2112SSF stosowanego do napędu lokomotyw spalinowych serii SP 45. Uzyskane wyniki wskazują na to, że proponowana koncepcja...
Omówiono główne kierunki badań naukowych prowadzonych w Zakładzie Pojazdów Szynowych oraz działalności dydaktycznej. Przedstawiono także krótką historię Zakładu
In this article authors show the possibillities of using the parameters of vibration signals to estimate valve clearance in internal combustion engines. The main methodological assumptions of signal analysis and their results have been presented herein. The concept of research so as to solve the valve clearance diagnostic problem, based on the vibr...
This article presents the basis of construction of diagnostic relations between the technical condition of the object and diagnostic symptoms. Terms: "relation" and "functional relations" describing diagnostic relations were defined. Using a one-rotor gas turbine engine as an example, construction of diagnostic relations for chosen operational para...