• Home
  • Forat Yasir AlJaberi
Forat Yasir AlJaberi

Forat Yasir AlJaberi
Al-Muthanna University · College of Engineering- Department of Chemical Engineering

PhD of Chemical Engineering
Transport phenomena/wastewater treatment. For contact: e-mail: furatyasir@mu.edu.iq; Mobile: +9647803020087

About

44
Publications
17,017
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
224
Citations
Introduction
I'm really interested in the aquatic pollution due to the continuous discharging of contaminants from domestic and industrial effluents. Therefore, my planned researches concern about this issue, in addition to other specialized experience about the modification of some products of crude oil.

Publications

Publications (44)
Article
Electrochemical treatment methods are frequently used to remove a wide range of pollutants from wastewaters generated by domestic and industrial operations. This work aims to investigate the impacts of using monopolar and bipolar connection modes of an electrocoagulation reactor (ECR) used to remove multi-toxic metals from synthetic wastewater. The...
Article
The nickel removing by electrocoagulation of Ni(II)-NH3-CO2-SO2-H2O system was studied in a batch reactor of 50 L useful volume, with stirring, and two pairs of aluminum electrodes. The operating parameters were nickel concentration between 255 and 342 mg L-1, current density of 11.0 and 16.6 mA cm-2, pH 8.34±0.06, mean temperature 58.4±3.9 oC and...
Article
Full-text available
Considerable amounts of domestic and industrial wastewater that should be treated before reuse are discharged into the environment annually. Electrocoagulation is an electrochemical technology in which electrical current is conducted through electrodes, it is mainly used to remove several types of wastewater pollutants, such as dyes, toxic material...
Chapter
Full-text available
Electrocoagulation (EC) is an excellent and promising technology in wastewater treatment, as it combines the benefits of coagulation, flotation, and electrochemistry. EC is an efficient process to remove both organic and inorganic pollutants from wastewater. During the last decade, extensive research has focused on the treatment of several types of...
Article
The behavior of AC conductivity (σac), loss tangent (tan δ), and relative permittivity (ε′) for composites of PVC-P/graphite electrode waste (GEW) was investigated, and a qualitative explanation was provided as a function of PVC-P weight fractions (0, 5, 10, 15, 20, and 25) wt. percent, temperature (30-90) °C, and frequency (100Hz-2MHz). The behavi...
Article
A novel electrocoagulation reactor (ECR) has been assessed for the treatment of real groundwater to minimize the concentrations of turbidity, and total hardness to be acceptable for civil uses. The batch ECR had a finny anode placed concentrically in a tubular cathode where the active area of anode is significantly higher compared to its immersed v...
Article
Full-text available
With the increasing intensity of the ecological and environmental problems and the scarcity of fresh water, this paper was introduced to investigate the ability to use treated wastewater as a cooling media via studying its behavior throughout a cooling tower. The simultaneous transfer of heat and mass from the treated wastewater to air over splash-...
Article
This paper aims to investigate the ability of photo-Fenton technology to remove Reactive Red dye (RR-dye) from wastewater using batch and continuous operating modes. The batch mode of photo-Fenton removal of organic content was conducted under the influence of solution pH (3–10), hydrogen peroxide (25–100 ppm), irradiation time (20–90 min), ferrous...
Article
Full-text available
The present study aims to remove reactive blue dye (RBD) from simulated wastewater using a batch electrocoagulation reactor connected to a power source in a bipolar-parallel mode. The aluminum electrodes used in this work have been configured to be the interior two as perforated-plates while the outer two plates as not perforated. This investigatio...
Conference Paper
Full-text available
The present study aims to employ an electrocoagulation reactor containing concentric-aluminum-tubes as electrodes for total organic carbon (TOC) removal from real oily wastewater released from drilling sites located in West Qurna-Iraq. Applied current ranges from 0.5 to 2.0 Amps and contact time ranges from 10 to 40 min had selected as the operatio...
Article
Huge amount of oily wastewater is annually discharged from several activities such as oil refineries, chemical and petrochemical industries. Several methods are employed for the treatment of oily wastewater including physical, chemical, and biological techniques in order to minimize the harmful impacts before being reused. The present study compare...
Article
In this study, the investigation of the use of polyvinyl chloride-paste (PVC-P) composites which contained spark plug aluminum silicate nanoparticles (NGK-NPs) for different insulation applications was carried out. The spark plug NGK-NPs acted as a matrix for the aluminum silicate nanoparticle powder. We analyzed the dielectric properties of the PV...
Article
Full-text available
The present work provides to treat real oily saline wastewater released from drilling oil sites by the use of electrocoagulation technique. Aluminum tubes were utilized as electrodes in a concentric manner to minimize the concentrations of 113400 mg TDS/L, 65623 mg TSS/L, and the ions of 477 mg HCO3/L, 102000 mg Cl/L and 5600 mg Ca/L presented in r...
Presentation
Full-text available
محاضرة مهمة تتضمن كيفية نشر اي بحث علمي ابتداءً من الفكرة وحتى نشر البحث في مجلات رصينة
Conference Paper
Full-text available
The adsorption equilibrium isotherms of oil content via the electrocoagulation treatment of real oily wastewater were studied and modeled. Ten isotherm models (Langmuir, Freundlish, Temkin, Dubinin-Radushkevich, Kiselev, Fowler-Guggenheim, Elovich, Hurkins-Jura, Jovanovic and Hill-de Boer models) were selected to predict the adsorption equilibrium...
Article
Background: Large amounts of oily wastewater and its derivatives are discharged annually from several industries to the environment. Objective: The present study aims to investigate the ability to remove oil content and turbidity from real oily wastewater discharged from the wet oil's unit (West Qurna 1-Crude Oil Location/ Basra-Iraq) by using an...
Article
Full-text available
Several types of modifiers have been used as additives into asphalt cement in order to enhance the performance of the Hot Mix Asphalt for road pavements such as PVA, SBS and crumb rubber. The aim of the present work is to study the effect of the crumb rubber classification according to the size of scrap tires, i.e., car and truck tires, on the beha...
Article
The objective of the present work is to study the impact of the electrodes configuration utilized in an innovated electrocoagulation reactor on the behavior of current efficiency and the ohmic potential drop via the treatment of real oily wastewater released from crude oil wells location (West Qurna 1/Basra-Iraq). A monopolar mode of triple aluminu...
Article
Full-text available
Energy consumed by the electrochemical treatment of wastewater has more responsibility in designing such a process. The objective of the present study was to investigate the effect of electrodes geometry used in the electrocoagulation cell on the operating cost that required to remove lead from the industrial wastewater. It has shown that cost was...
Conference Paper
Full-text available
Water pollution is classified as one of the complex problems that are suffered by many countries around the world especially the Third World. Wastewater consists of different pollutants either biodegradable such as the organic contaminants or non-biodegradable such as the toxic heavy metals. In Iraq, according to the published report by Central Sta...
Book
Full-text available
Heavy metals pollution has become the most effective environmental problem in recent years as a result of releasing hazard materials into the environment. Various kinds of techniques are used for the treatment of these toxic materials such as electrocoagulation process. Electrocoagulation process is an attractive method for the treatment of wastewa...
Conference Paper
Full-text available
الكثير من دول العالم الثالث مرَّت بفترات زمنية صعبة ومعقدة تخللتها الحروب او النزاعات العرقية والطائفية وأدّت بمكان الى اضعاف تلك الدول وابتعادها عن سبيل المعرفة وانغماسها بالحرب والدم. وبرغم ذلك لم تكن تلك الدول ببعيدة عن مجال الابتكار ولكنه في الغالب كان يخدم الترسانة العسكرية او المصلحة الفئوية. وهذا لم يكن منحصراً في دول العالم الثالث فحسب بل ش...
Article
Full-text available
The aim of the present work is to analyze the phenomenon of electrodes consumption (i.e. anode and cathode electrodes) when it used in a batch electrocoagulation reactor for the removal of lead from a synthesis wastewater. The studied operational parameters were the electrolysis time (5-60)minute, pH value (2-12), applied current (0.2-2.6)Amperes,...
Conference Paper
Full-text available
The aim of the present study is to investigate the effect of the operational variables and the conductivity of the simulated wastewater on the performance of the electrocoagulation reactor, i.e. the values of the voltage applied and the consumption of the electrical energy. Aluminum concentric tubes were used in a parallel-monopolar arrangement to...
Conference Paper
Full-text available
Numerous techniques such as physical, chemical, biological, and physicochemical methods were used for the treatment of the aquatic system in order to remove various pollutants such as organics, inorganics, and heavy metals from domestic and industrial effluents. The aim of the present study is to review the most practical wastewater treatment techn...
Data
I have been awarded this recognition as I am within the top 10th percentile of reviewers for the Journal of Hazardous Materials, in terms of the number of manuscript reviews completed in the last two years.
Article
The removal of heavy metals from wastewater using efficient methods has caught the attention of scientists in recent years. One of these methods is the electrocoagulation technique which is widely studied and employed around the world. The aim of the present work was the study of the autocatalytic behavior of an electrocoagulation reactor that cons...
Article
Heavy metals pollution has become the most effective environmental problem in recent years as a result of releasing hazard materials into the environment. Various kinds of techniques are used for the treatment of these toxic materials such as electrocoagulation process. Electrocoagulation process is an attractive method for the treatment of wastewa...
Article
Full-text available
The aim of the present research is to investigate the effecting of pH parameter on the feasibility of lead removal from simulated wastewater using an electrochemical system. Electrocoagulation method is one of electrochemical technology which is used widely to treat industrial wastewater. Parameters affecting this operation, such as initial metal c...
Article
Full-text available
The present research was carried out to study the adsorption phenomenon via a batch electrocoagulation cell. Simulated wastewater contain heavy metals such as lead is used as an experimental solution. This simulated solution was natural and the effecting other parameters were a constant stirring speed ( 150 rpm), (5-60) minutes of contact time, (10...
Article
The electrocoagulation treatment of wastewater is the best applicable method to remove lead from the aqueous solutions using aluminium electrodes. The aim of the present study is to investigate the effect of the operational parameter son the efficiency of lead removal from synthesis wastewater using an experimental design. Applied current (0.5–2.5)...
Article
Full-text available
The aim of the present work is to investigate the effect of the electrodes design in an electrocoagulation reactor as well as specific operational parameters on the value of total dissolved solids (TDS) presented in the simulated wastewater that polluted by lead ions. Triple concentric aluminum tubes electrodes were used in the electrochemical cell...
Article
The improvement of Basrah asphalt cement that used in hot mix pavement can be achieved by using four influencing variables, which are the value of temperature needed for mixing, time of mixing, the amount of wasted car tire rubber (WCR) and the amount of wasted truck tire rubber (WTR). The main virtue of this study is to know the affecting of class...
Article
Full-text available
The improvement of Basrah asphalt cement that used in hot mix pavement can be achieved by using four influencing variables, which are the value of temperature needed for mixing, time of mixing, the amount of wasted car tire rubber (WCR) and the amount of wasted truck tire rubber (WTR). The main virtue of this study is to know the affecting of class...

Network

Cited By

Projects

Projects (2)
Archived project
To remove the heavy metal ions from industrial wastewater by using the technique of electro- coagulation method depending on some parameters such as the initial metal concentration, contact time and others.