Elhadi I. DekamUniversity of Tripoli | UOT · Department of Mechanical and Industrial Engineering
Elhadi I. Dekam
B. Sc. M. Sc. PhD. Professor of Mechanical Engineering
About
234
Publications
402,330
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
96
Citations
Citations since 2017
Introduction
Elhadi Ibrahim Dekam is a full professor in the mechanical engineering department, faculty of Engineering, university of Tripoli, Tripoli, Libya. He got his B. Sc. Degree from University of Tripoli, Libya, in 1976, M. Sc. Degree from Washington University, Missouri, USA, in 1982, and PhD. Degree from Southampton University, England, UK, in 1987. He hold the Head of Mechanical Engineering Department. He was a Scientific Committee member in the solar energy studies center. He worked as the coordinator for graduate studies. His research interests are in the fields of fluid mechanics, heat transfer, Atmospheric Stability, Energy efficiency Measures, and thermal energy conversion.
Additional affiliations
October 2010 - present
Position
- Professor (Full)
Description
- Thermodynamics, Fluid Mechanics, Heat Transfer, Gas Dynamics, Incompressible Flow Machines, Solar Energy Conversion.
April 1987 - present
Position
- Supervisor
Description
- Pipelines And Pumping Systems, Solar Thermal Energy Conversion Systems. Fluid Mechanics, Heat Transfer, and Gas Dynamics research areas.
August 1983 - December 1986
Education
March 1983 - December 1986
Publications
Publications (234)
Final Examination in Fluid Mechanics I in Fall 2019
Final Examination in Fluid Mechanics in Fall 2013
هذه الوثيقة مخصصة لاستخدامها من قبل طلاب الدراسات العليا لإعداد مقترح بحثي لرسالة درجة ماجستير ، وهذا المقترح من المفنرض تقديمه ليتم فحصه من قبل المشرف والمتخصصين في القسم واعتماده من قبل وزارة التعليم العالي للتأكد من عدم تكرار الموضوع. لذلك، على الطالب التأكد من أن المقترح واضح ودقيق وغني بالمعلومات
“A research proposal describes what you will investigate, why it’s important, and how you will conduct your research. The format of a research proposal varies between fields, but most proposals will contain at least these elements; Title page, Introduction, Literature review, Research design or Methodology, and Reference list. While the sections ma...
The increasing demand for automotive parts of lightweight metals is led engineers and researchers to develop new alloys and/or improve existing ones with attractive properties and thus, higher performance levels. The Al-Si-Cu (Aluminum-Silicon-Copper) cast alloys are among those alloys gaining prominence in the automotive industry sectors. The weld...
700 Reads RG achievement - Radial centrifugal pumps.
This is a recommendation letter for a Ph. D. holder looking for a better job as a staff member in a university.
An achievement; 1000 Reads for our Chapter in Fluid Mechanics.
هذه مسائل محلولة كأمثلة لباب التحليل البعدي
هذه أمثلة لمسائل محلولة لباب التدفق الداخلي اللزج
RG achievement; With 2,034 new reads, your contributions were the most read contributions from Thermodynamics.
This is a letter concerning the evaluation for the first draft of an M. Sc. Thesis.
30,000 Book Reads
Fluid Mechanics; Fundamentals and Applications
This paper studies the desired heat exchanger between the gas topping cycle and air bottoming cycle in terms of characteristics, performance, and optimizing design aspects of the plant power generation cycle. The performance of the combined power cycle with the heat exchanger is investigated under different operating conditions for different availa...
The research items introduced in my RG account reached 5,000 recommendations. These items are related to nice team research works. Big thanks to my colleagues,,,
A reviewer certificate
4,500 Research Recommendations - RG achievement.
To reduce fossil fuel consumption and its polluted environmental impact, a new enhanced waste heat recovery system operated by hot chimney flue gases from a cement plant is designed, analyzed, and evaluated. The configuration of the system is competitive and innovative. It is designed to be capable of producing space air cooling and electricity gen...
ME 313 Fluid Mechanics Course Final Exam for Fall 2019.
An abstract template, 10,000 reads, RG achievement.
4,000 Recommendations - (4) Elhadi Ibrahim Dekam _ Achievement.
This is an evaluation letter for the first Master's Degree Thesis draft.
In this thesis, exergoeconomic analysis is to be performed by using the Specific Exergy Costing method (SPECO) [5] evaluating the thermoeconomic performance of the considered case study related to the North Benghazi Combined Cycle Steam Power Plant. The second law of thermodynamics is to be employed to find the exergy destruction and the overall ef...
This research point will carry out the integration of concentrating solar energy technologies with gas-steam combined cycles related to the actual power units at Al-Khaleej power plant. The aim of this thesis is to analyze and compare the performances of two different integration schemes: the solar hybrid combined cycle system (SHCC), and the integ...
Using the simulation and theoretical approach is always accompanied by a certain degree of uncertainty due to the assumption-based simplicity of the mathematical models related to the actual systems. The operating and performance theory of thermosyphon solar water heaters is a very complicated one and may not be represented accurately by a simple m...
The existence of the radial thrust in centrifugal pump volutes does have negative effects on pump performance. Radial thrust is divided into two components; static and dynamic radial forces. Both radial force components cause shaft bending which will impact the performance of the mechanical seal. Shaft bending and mechanical seal failure can cause...
Simulation-based building performance allows detailed assessment of energy consumption in buildings, to analyze the energy performance. The influence of each factor extensively and systematically utilizing a dynamic energy simulation tool will be examined. EnergyPlus software allows flexibility of the energy modeling and flexibility of changing the...
Air valves are an important tool for surge dampening and suppression. Accurate air valve specifications, location, and sizing are vitally essential for effective, efficient liquid flow systems and for sufficient pressure surge dampening and suppression. The close relation of the air valves with the corresponding hydraulic systems is still a good su...
There is a continuous increase in the rate of energy demand in Libya as a result of the population increase and the continuous increase in economic activities. In order to maintain the improvement in the standard of living, the continuous increase in energy demand cannot be avoided, but the efficiency of its use can be increased and reliance on str...
CERTIFICATE OF ACCEPTANCE AND PUBLICATION
In this work, droplet impact onto surfaces with different properties and characteristics will be investigated experimentally. An experimental setup will be constructed to produce droplets with different size diameters. Different parameters will be manipulated, including droplet liquid type, droplet-free drop height, the nature of the impact surface...
CERTIFICATE OF ACCEPTANCE AND PUBLICATION
هذه قصاصات من كتاب عنوانه لهيب النار وهو ... ".. لهيب الصحراء .. مذكرات شاهد عيان .. عاصر أتون حرب تشاد الدامية بين الشعبين الشقيقين في ليبيا وتشاد .. حرب أوغلت في الدماء .. أنهكت الحرث والنسل ..التهمت الأرواح البريئة .. باسم الوطن والأمر العسكري الواجب التنفيد .. الدكتور سالم الهمالي .. طبيب جراح .. ابن الجنوب الليبي .. واحة تمنهنت .. قادته الظروف...
In this paper, exergy, exergoeconomic, and Exergy Cost Sensitivity analyses of a cogeneration steam power plant cycle and a parametric study were carried out Based on the Exergy cost theory .The mathematical models were developed and presented regarding mass,energy, exergy, and economy. The thermodynamic properties and research analyses are done by...
Two identical single - effect of single basin solar stills were designed, fabricated, tested and evaluated. One was operated alone while the other was coupled to a flat plate solar collector. Both were installed at some site in Tripoli, Libya at 32" 48' 51' N and 13’’26' I7' E. They were south oriented with a tilt angle of 23“. Measurements of vari...
This paper concerns the thermo-economic analyses of a cogeneration steam power plant cycle with a total capacity of 350MW. The exergy destruction, exergoeconomic factors, total cost, improvement potential, and exergy-related costs are defined, determined, and presented. The methodology is based on the Specific Exergy Costing approach. Thermodynamic...
1.500 Poster Reads - RG Achievement.
Certification Letter for Elhadi I. Dekam as a member of the International Journal of Applied Science editorial team.
3,227 New Week Reads. RG- Achievement.
1000 Reads
Chapter 7 Dimensional Analysis and Similitude
RG New Achievement
150,000 Reads Elhadi I. Dekam - RG - Achievements
7,000 Reads - RG Achievement - A Sample; M. Sc. Thesis Evaluation Report.
An English Abstract template reached 2,500 reads.
Chapter: Lecture Notes; Chapter 1 Introduction; Referring to; Solar Energy Engineering, Jui Sheng Hsieh, Prentice-Hall, 1986.
With 2,276 new reads, your contributions were the most read contributions from your institution,,,
It’s very good to mention very important general guide points, that help the candidate goes straight away in the research work. These include a list of valuable points.
The candidate student should well know a set of basic items; these include the following; 1. Defining the desired research point. 2. Studying and understanding the material related to the point. 3. Determining the main study objectives. 4. Selecting the method and specifying the methodology. 5. Practicing the method facilities concerning analytical...
Your chapter reached 800 reads
Achieved on October 3, 2020
Chapter: (Dimensional Analysis And Similitude) - التحليل البعدي والتشابه
Your technical report reached 6,000 reads
Achieved on October 1, 2020
Technical report: A Sample; M. Sc. Thesis Evaluation Report
1000 Reads RG Achievements
An Article; Transient Pipeline Flow
3,381 RG ACHIEVEMENTS
3,381 NEW READS
"Your contributions were the most read contributions from Libya."
In this study, the exergy and exergoeconomic analyses of simple typical thermal power plants are carried out. The general methodology for defining and calculating exergetic efficiencies, exergy destruction, exergoeconomic factors, total cost, improvement potential and exergy related costs in thermal systems are presented. The methodology is based o...
In this paper, the energy and exergy analyses of cogeneration thermal power plants are carried out at different operating loads. The considered power plant has a total power capacity of 350 MW, with a conventional steam Rankine cycle with high, intermediate and low pressure turbines, four low pressure heaters and two high pressure heaters. Detailed...
In this study, the exergy and exergoeconomic analyses of simple typical thermal power plants are carried out. The general methodology for defining and calculating exergetic efficiencies, exergy destruction, exergoeconomic factors, total cost, improvement potential, and exergy-related costs in thermal systems are presented. The procedure is based on...
تهنئة بعيد الأضحى المبارك، أعاده الله علينا وعلى الأمة الإسلامية باليمن والبركات والأمن والإيمان والسلامة والإسلام.
This is a list of considered M. Sc. Degree research titles. They may include mainly Fluid Mechanics and Heat Transfer applications. A number of related research papers were published and documented at RG. All theses were examined and authorized, except No 23 which is in the way to be presented and discussed.
بسم الله الرحمن الرحيم، الحمد لله الذي بنعمته تتم الصالحات، الحمد لله رب العالمين حمدًا كثيرًا طيبًا مباركًا فيه، على نعمه الوافية ظاهرة وباطنة، والصلاة والسلام على المبعوث رحمة للعالمين، سيدنا وحبيبنا محمد النبي الأميي الأمين، أفصح الناس لسانًا وأوضحهم بيانًا، صاحب العلوم الفاخرة، وعلى آله الأصفياء، وصحبه الأوفياء، والتابعين النجباء، وتابع تابعيهم...
غلاف لكتاب عنوانه أساسيات ميكانيكا الموائع
غلاف كتاب عنوانه آلات التدفق غير الانضغاطي
نظرًا للظروف القائمة، هناك من الأساتذة من يقترح على الطلبة الجامعيين المتقدمين في دراستهم، من أنجز 100 وحدة فما فوق على سبيل المثال، القيام باستغلال الوقت والعمل على إعداد مشروع تخرجهم عن بعد. هذا المقترح بنقاطه نأمل أن يكون مفيدًا. بالتأكيد جل الأساتذة وبقدر المستطاع سيحاول كل منهم المساهمة في الإشراف على طلبتنا ولو قليلاً في سبيل استغلال وقتهم وت...
This paper describes supersonic nozzle designing procedure and evaluates the behavior of the internal airflow through 3-Mach number nozzles. This is done for a two-dimensional, steady, isentropic, and irrotational flow through axis-symmetrical nozzles with extended parts to reduce the required differential pressure. The characteristic method techni...
This paper represents a study of different transient flow scenarios along a real huge
water pipeline system connecting Tarhunah reservoir with Abu-Ziyyan reservoir, which
forms a part of the Central Branch of the Libyan Man-Made River Project. There are two
pumping stations with 6 RDLO 400-880A (KSB) pumps operating in parallel for each
station. Bo...
More than one-third of the electricity generated in the world is being consumed in the residential sector. This study aims to model, simulate, and estimate electrical energy consumption in three different building styles. That is in order to compare and contrast energy consumption categories and their related social and architectural aspects for an...
هذه المعلقة تصب في صالح "كيف تصبح مهندسًا ناجحًا،" ولعلها تدعوا إلى عديد النقاط الإيجابية التي يحتاجها المهندس في بناء شخصيته والنجاح والتفوق في مسيرته الهندسية.
A template for a university staff member experience letter.
The reflctor characteristics are negatively affcted by the harsh desert weather conditions and hence the performance of the system decreases. Ths paper investigates the effct of two diffrent types of moving sands “A” and “B” from Libya on the performance and safety of the solar reflctors. Samples are collected from areas that are suitable for insta...
نقلنا في مقال سابق عن الإيجابية وأهميتها وطرق اكتسابها، وإلحاقًا له، سننقل في مقال اليوم عن خطوة مهمة باتجاه الإيجابية، ألا وهي التخلص من الطاقة السلبية وتأثيرها في البيت والفرد والمجتمع والحياة بشكل عام. فما هي الطاقة السلبية وأسبابها في حياة الفرد؟ وكيف يمكن تفريغ الطاقة السلبية والتخلص منها؟
كل إنسان فينا يحمل في نفسه طاقة قد تكون إيجابيّة، وقد تكون سلبيَّة، وقد يمزج بين الطاقتين بحسب الموقف، فالطاقة الإيجابيَّة هي طاقة تحمل في طياتها الحب والعطاء والتفاؤل، أما الطاقة السلبية تزرع في قلب صاحبها، وتنعكس على سلوكه البغضاء والكراهية والسلبية والتشاؤم، وهناك طرق تكتسب خلالها الطاقة الإيجابيّة، وهناك نتائج لها على الفرد وعلى المجتمع. الطاقة...
PROJECT TASK; Review at least one journal paper from the latest 2000-2019 related to the Fluid Mechanics subject (a list of topics may be provided). The projects consist of two parts; an oral prepared presentation and a well-written report. The presentation will be made usually in PowerPoint during the last week of class within a 10-15 minute perio...
The reflector characteristics are negatively affected by the harsh desert weather conditions and hence the performance of the system decreases. This paper investigates the effect of two different types of moving sands "A" and "B" from Libya on the performance and safety of the solar reflectors. Samples are collected from areas that are suitable for...
Questions
Questions (23)
As usual, most of Dear RG members receive a number of messages daily, including valuable messages which are read as traced. However, sometimes when the valuable one is to be recalled, one may couldn’t remember any details to help in search for it! Is there a clue for such situation? Thanks a lot for your advice,,,
At the stage of writing a research work proposal or when writing the introductory thesis chapter, an aims-objectives confusion might arise.
Projects
Projects (29)
Arab Research Union
Welcome to all the distinguished professors, doctors and researchers in this project, which aims to exchange experiences.
Goals:
1-Sharing & recommending publications.
2-Connecting with colleagues.
3-Seeking new collaborations.
4-Obtaining statistics and metrics on use of uploaded publications.
5-Asking questions of researchers around the world that have the same set of interests.
6-Job seeking or recruitment.
7- Journal Invitations (Editorial Board, Reviewer)
8- Call for papers
9- International Conferences