Eiichi Yamamoto

National Institute of Health Sciences, Japan | NIHS · Division of Medical Devices

Friction between the contact lens (CL) and the corneal or conjunctival surfaces is considered one of key factors in triggering CL‐associated adverse effects. However, the relationship between friction properties and these effects remains unclear. Traditional measurement methods often fail to replicate real‐life conditions, thereby highlighting the...

Background: This study aims to investigate the impact of test conditions on the results of the compression testing of microneedle arrays (MNAs). Methods: Uniaxial compression tests were conducted on polyglycolic acid-fabricated biodegradable MNAs. Load–displacement curves were obtained for varying conditions, including the number of microneedles (M...

Background: The combination of multiple polymers is anticipated to serve as a means to diversify the physical properties and functionalities of dissolving microneedles. The mixing state of components is considered as a crucial factor in determining their suitability. Objectives: The purpose of this study was to elucidate whether thermal analysis of...

We recently reported a method for recovering and quantifying residual proteins bound to surfaces of various medical instruments via thermal coagulation under neutral pH and room temperature. The method effectively recovered and solubilised coagulated proteins at high temperatures in dry and humid conditions, with a protein recovery rate of > 90%. T...

The delamination of ultra-high molecular weight polyethylene (UHMWPE) in artificial joints is a major cause limiting the long-term clinical results of arthroplasty. However, the conventional test method using simple reciprocation to evaluate the delamination resistance of UHMWPE materials has insufficient detection sensitivity. To reproduce delamin...

The solid-state properties of drug candidates play a crucial role in their selection. Quality control of active pharmaceutical ingredients (APIs) based on their structural information involves ensuring a consistent crystal form and controlling water and residual solvent contents. However, traditional crystallographic techniques have limitations and...

In vivo skin sensitization tests are required to evaluate the biological safety of medical devices in contact with living organisms to provide safe medical care to patients. Negative and positive reference materials have been developed for biological tests of cytotoxicity, implantation, hemolysis, and in vitro skin irritation. However, skin sensiti...

The recent discovery of N-nitrosodimethylamine (NDMA), a mutagenic N-nitrosamine, in pharmaceuticals has adversely impacted the global supply of relevant pharmaceutical products. Contamination by N-nitrosamines diverts resources and time from research and development or pharmaceutical production, representing a bottleneck in drug development. There...

Dissolving microneedles (MNs) are novel transdermal drug delivery systems that can be painlessly self-administered. This study investigated the effects of experimental conditions on the mechanical characterization of dissolving MNs for quality evaluation. Micromolding was used to fabricate polyvinyl alcohol (PVA)-based dissolving MN patches with ei...

Background: The ultra-high molecular weight polyethylene (UHMWPE) component of artificial joints is one of the most important factors affecting the clinical outcomes of joint arthroplasty. Although the possibility of in vivo UHMWPE degradation caused by absorbed lipids has been reported, a quantitative evaluation of this phenomenon has not yet bee...

We recently reported a method for recovering and quantifying residual proteins bound to surfaces of various medical instruments via thermal coagulation under neutral pH and room temperature. The method effectively recovered and solubilised coagulated proteins at high temperatures in dry and humid conditions, with a protein recovery rate of > 90%. T...

Purpose We fabricated and characterized polyvinyl alcohol (PVA)-based dissolving microneedles (MNs) for transdermal drug delivery of apomorphine hydrochloride (APO), which is used in treating the wearing-off phenomenon observed in Parkinson’s disease. Methods We fabricated MN arrays with 11 × 11 needles of four different lengths (300, 600, 900, an...

There is a dramatic increase in drug candidates that exhibit complex structures and do not comply with Lipinski's rule of five. One of the most critical and complex technical challenges in the quality control of such drug candidates is the control of analogous substances contained in active pharmaceutical ingredients and related formulations. Altho...

The stability of active pharmaceutical ingredients (APIs) and formulations has become a major chemistry, manufacturing, and control (CMC) concern in the pharmaceutical industry because it can determine the feasibility of research and development, the development period, and the development costs of a certain formulation. To streamline the research...

Controlling the physical stability of noncrystalline active pharmaceutical ingredients remains a major challenge in the development of amorphous formulations such as amorphous solid-dispersion (ASD) formulations. To establish new evaluation and formulation strategies, the spatial distribution of the crystal phase in bulk amorphous nifedipine (NFD)...

Microneedle patches, which are attracting attention as a new administration route for drugs, are required to have reliable insertion properties in order to control the dosage. Therefore, research on dedicated applicator that uses a spring force to hit the application body site with a microneedle patch is also active. One of the major problems is th...

High-resolution cryogenic transmission electron microscopy (cryo-TEM) evidenced that doxorubicin sulfate crystals in liposomes (prepared by remote loading with ammonium sulfate) form folded, undulating, and fibrous crystals with a diameter of approximately 2.4 nm. An undulating, fibrous crystal considered to be undergrowth, in addition to bundles o...

Understanding the characteristics of crystal polymorphism of active pharmaceutical ingredients and analyzing them with high sensitivity is important for quality of drug products, appropriate characterization strategies, and appropriate screening and selection processes. However, there are few methods to measure intra- and intermolecular correlation...

Particular batches of Moderna mRNA Coronavirus Disease 2019 (COVID-19) vaccine were recalled after foreign particles were found in some vaccine vials at the vaccination site in Japan in August 2021. We investigated the foreign particles at the request of the Ministry of Health, Labour and Welfare. Energy dispersive X-ray spectroscopy analysis sugge...

The microscopic test method (microscopic examination) used to identify crude drugs is a common method in the identification of the original plant source by determining the characteristics from a small sample quantity. However, in recent years, the number of examiners who are familiar with the microscopic examination technique has decreased. In rece...

Purpose Undesired drug sorption on laboratory material surfaces reduces the performance of analytical methods and results in the generation of unreliable data. Hence, we characterized the sorption of drugs and evaluated the sorption extent using a linear free energy relationship (LFER) model with Abraham solvation parameters of drugs. Furthermore,...

N-Nitrosodimethylamine (NDMA) has been detected in some drug substances and pharmaceutical products containing sartans, ranitidine and metformin, and a potential risk of NDMA contamination exists in other drug substances and their pharmaceutical products. To quantitate NDMA in various drugs having diverse physicochemical properties, a specific, sen...

N-Nitrosodimethylamine (NDMA) is a probable human carcinogen. This study investigated the root cause of the presence of NDMA in ranitidine hydrochloride. Forced thermal degradation studies of ranitidine hydrochloride and its inherent impurities (Imps. A, B, C, D, E, F, G, H, I, J, and K) listed in the European and United States Pharmacopeias reveal...

The purpose of this study was to develop a quality evaluation method for dissolving microneedle arrays (DMNAs) and determine the spatial distribution pattern of drugs in DMNAs. Raman spectroscopy mapping was used to visualize the drug distribution in DMNAs and drug-loaded polymer films as a model. Powder X-ray diffraction (PXRD) and high-pressure l...

A simple and rapid on-line SFE/SFC/quadrupole TOF-MS method to simultaneously analyze active pharmaceutical ingredients and impurities from metered-dose inhalers (MDIs) was developed using ciclesonide MDI (CIC-MDI) as an example. CIC-MDI, as drug Alvesco®, has been approved for the treatment of bronchial asthma, and its major impurities are listed...

A non-destructive discrimination method for crystals in solid dosage drug forms was first developed using a combination of Raman spectroscopy and X-ray micro-computed tomography (X-ray CT). Identification of the crystal form of an active pharmaceutical ingredient (API) at the appropriate pharmaceutical dosage is crucial, as the crystal form is a de...

The purpose of this study was to develop a quality evaluation method for dissolving microneedle arrays (DMNAs) and determine the spatial distribution pattern of drugs in DMNAs. Raman spectroscopy mapping was used to visualize the drug distribution in DMNAs and drug-loaded polymer films as a model. Powder X-ray diffraction (PXRD) and high-pressure l...

Inhaled ciclesonide (CIC), a corticosteroid used to treat asthma that is also being investigated for the treatment of corona virus disease 2019, hydrolyzes to desisobutyryl-ciclesonide (des-CIC) followed by reversible esterification when exposed to fatty acids in lungs. While previous studies have described the distribution and metabolism of the co...

The occurrence of complex coacervation in an aqueous mixture of proteins (lysozyme, albumin, immunoglobulin G) and hyaluronic acid and its effect on protein transition in a model system was studied to elucidate factors determining the bioavailability of subcutaneously injected therapeutic proteins. Mixing of hyaluronic acid and the model proteins i...

The purpose of this study was to elucidate the effect of high-temperature storage on the stability of ranitidine, specifically with respect to the potential formation of N-nitrosodimethylamine (NDMA), which is classified as a probable human carcinogen. Commercially available ranitidine reagent powders and formulations were stored under various cond...

The objective of this study was to develop a simpler and more practical quantitative evaluation method of cold flow (CF) in transdermal drug delivery systems (TDDSs). CF was forcibly induced by loading a weight on a punched-out sample (bisoprolol and tulobuterol tapes). When the extent of CF was analyzed using the area of oozed adhesive as followin...

Drug-containing nanoparticles (nanomedicine) are ideal targeted-drug-delivery systems. However, methods for the simultaneous analysis of the drug within the nanoparticle and free drug in a short time are rather limited. In this study, we developed a polymer-modified monolithic column with cationic groups (trimethylammonium) for the simultaneous ana...

Formulation of a drug as liposomes facilitates its delivery to the disease target. Rightly, liposomes are gaining popularity in the medical field. In order for the drug to show efficacy, release of the encapsulated drug from the liposome at the target site is required. However, the release is affected by the permeability of the lipid bilayer of the...

Over the past few decades, liposome drug delivery systems (liposome DDS) have attracted much attention as the most advanced DDS. Efficacy and toxicity profiles of liposomes are based on their characteristic pharmacokinetics, drug release, and disposition after administration. Many attempts have been made to develop these systems especially as lipos...

Silicate is an excellent adsorbent because of its large surface area and amenability to surface modification. In this study, the representative liposome nanomedicines DOXIL® and AmBisome® were enriched using a silica monolith disc (diameter 4.2 mm, length 1.5 mm) with bimodal pores. Although the nanoparticles passed through the disc without retenti...

Purpose: To simulate the stimuli-responsive and stoichiometrically controlled doxorubicin (DOX) release from liposomes in in vivo tumor interstitial fluid (TIF), the effect of ammonia concentration and pH on the DOX release from liposomes in human plasma at 37°C was quantitatively evaluated in vitro and the release rate was calculated as a functio...

The major issue of cancer chemotherapy is the adverse effect, which is elicited by the systemic exposure of the anticancer agents. The application of DDS technology into anticancer agents is able to inhibit non-selective distribution and to increase accumulation into tumor tissue, thus it can decrease systemic adverse effects and improve therapeuti...

A simple and rapid chromatographic measurement method for determining doxorubicin (DOX) encapsulation efficiency (EE) into PEGylated liposomes using nanoparticle exclusion chromatography (nPEC) was developed. In this work, Doxil® and two PEGylated liposomes spiked with DOX were employed as model liposomes, and unencapsulated DOX was measured by hig...

In recent years, nanomedicines have received growing attention in a range of medical applications, including selective drug delivery technology. In this context, the analysis of liposome stability and drug release from liposomes is of particular importance, as the efficacy of a nanomedicine is determined by the release of the encapsulated drug. We...

Recently, nanoparticles have garnered considerable attention, and the demand for a rapid and simple method for their analysis has increased accordingly. The bimodal pores (few μm- and few tens nm-sized pores) of monolithic columns were thought to be suitable for the separation of nanoparticles and small molecules; however, the residual silanol grou...

Purpose: Nanoparticles have been used in diverse areas, and even broader applications are expected in the future. Since surface modification can influence the configuration and toxicity of nanoparticles, a rapid screening method is important to ensure nanoparticle quality. Methods: We examined the effect of the nanoparticle surface morphology on...

This article presents an update describing the current information on the chemistry of restricted-access media (RAM), high-performance liquid chromatography instrumentations for RAM, useful techniques for use with RAM solid-phase extraction, and applications of RAM columns.The term RAM refers to specialized chromatographic packing materials that po...

A novel metal aquo-ion affinity chromatography has been developed for the analysis of basic compounds using heat-treated silica gel containing hydrated metal cations (metal aquo-ions) as the packing material. The packing materials of the metal aquo-ion affinity chromatography were prepared by the immobilization of a single metal component such as F...

We recently demonstrated that Doxil loses its long-circulating properties when injected repeatedly at doses below 2mg/m(2) in dogs. In studies using other animal species, PEGylated liposomal doxorubicin has been reported not to induce the accelerated blood clearance (ABC) phenomenon. We investigated the issue of whether Doxil can elicit the ABC phe...

This report describes the application of partially fluorinated carboxylic acids as ion-pairing reagents for basic analytes in high-performance liquid chromatography coupled with electrospray ionization mass spectrometry (LC/ESI-MS) in positive-ion mode. Partially fluoridated carboxylic acids such as difluoroacetic acid, 3,3,3-trifluoropropionic aci...

Crystals, amorphous substances, salts, and hydrates of a salt of methyl N-[3-(6,7-dimethoxy-2-methylaminoquinazolin-4-yl)phenyl]terephthalamic acid having PDE4 inhibitory action are provided. These compounds are useful for treating allergic diseases such as atopic dermatitis.

Anti-fungal agent having excellent anti-fungal action physicochemical properties including safety and water solubility. Compound represented by formula (I), or salt thereof: wherein R1 represents hydrogen, halogen, amino, R11—NH— wherein R11 represents C1-6 alkyl, hydroxy C1-6 alkyl, C1-6 alkoxy C1-6 alkyl, or C1-6alkoxycarbonyl C1-6 alkyl, R12—(C...

Phosphodiesterase (PDE) 4 inhibition is a well known anti-inflammatory mechanism, but the development of PDE4 inhibitors has been hampered by side effects such as nausea and emesis. Local delivery of a PDE4 inhibitor to the site of inflammation may overcome these issues. The purpose of this study was to assess the therapeutic potential of E6005, a...

Liposomes are drug delivery systems that can alter the pharmacokinetic properties of compounds. The adverse effects of anticancer agents are a limiting factor for cancer chemotherapy, therefore, liposomal formulations have the potential to improve the therapeutic efficacy of anticancer agents by enhancing their accumulation in tumors and reducing n...

The feasibility of a rapid automated method for determination of the encapsulation efficiency (EE) of a liposome formulation using a column-switching HPLC system was confirmed by employing several types of liposome formulations containing doxorubicin (DXR). A suspension of DXR liposome was injected directly into an online solid-phase extraction (SP...

The accelerated blood clearance phenomenon involving anti-PEG IgM production has been recognized as an important issue for the design and development of PEGylated liposomes. Here, we show that empty PEGylated liposomes and Doxil, PEGylated liposomes containing doxorubicin, both caused anti-PEG IgM production and thereby a rapid clearance of the sec...

A method for the simultaneous measurement of liposome-encapsulated and released drugs in mouse plasma by on-line solid phase extraction (SPE)-SPE-HPLC with direct plasma injection was developed using a doxorubicin (DXR)-containing liposome formulation as the model drug. During SPE, the released DXR was extracted on the 1st restricted-access media (...

In this study, a frozen water phase method for logD measurement using a 96-well plate was developed. In the case of logD measurement of compounds, the problem of octanol contamination often occurs; in lipophilic compounds, the concentration of the octanol phase is much higher than that of the water phase. When the water phase is separated from the...

The present paper describes the on-line extraction of drugs in plasma using a restricted-access media (RAM) column in a column-switching high performance liquid chromatography (HPLC) apparatus that was equipped with an on-line dilution system. The use of a six- to eightfold on-line dilution ratio for plasma samples resulted in almost 100% recovery...

A methylcellulose-immobilized weak cation-exchange (MC-WCX) silica-based restricted-access material (RAM) was developed. The MC-WCX consists of an MC outer surface and 2-carboxyethyl phase internal surface, allowing for direct analysis of basic drugs in plasma. The retention properties of the MC-WCX were evaluated for sulpiride, quinidine, ranitidi...

Several combination therapies have been tried for treating of type 2 diabetes to control more effectively fasting hyperglycemia and postprandial hyperglycemia. In this study, we have examined the effects of combining a novel, selective, and competitive dipeptidyl peptidase IV (DPP-IV) inhibitor, 3-but-2-ynyl-5-methyl-2-piperazin-1-yl-3,5-dihydro-4H...

We describe a sensitive determination of aspirin (ASA) and its three metabolites (salicylic acid [SA], 2,3-dihydroxybenzoic acid [2,3-DHBA], and 2,5-dihydroxybenzoic acid [gentisic acid (GA)]) in rat plasma. Analysis was carried out by on-line solid-phase extraction (SPE) using a methylcellulose-immobilized-strong anion-exchanger (MC-SAX), followed...

We investigated on-line sample preparation of basic compounds from plasma using a methylcellulose-immobilized reversed-phase restricted-access media in column-switching liquid chromatography (LC). Dilution of the plasma sample with phosphate buffered saline prevented or delayed the formation of fibrin clots at 4 degrees C and resulted in reproducib...

An on-line purification method for cationic compounds and their metabolites in rat bile was investigated using a column-switching technique. 8-Hydroxyquinoline and its glucuronide were used as test compounds. Bile samples were injected directly into the system and successful on-line extraction with high purification efficiency for analytes was achi...

A novel methylcellulose-immobilized restricted access media column with strong cation-exchange groups on an internal surface (MC-SCX) was evaluated for the direct injection analysis of basic polar drugs in plasma by column-switching liquid chromatography/mass spectrometry (LC/MS). Analytical conditions, including an automated pretreatment step and...

We developed a novel methylcellulose-immobilized strong cation-exchange (MC-SCX) precolumn for direct analysis of drugs in plasma. MC-SCX consists of silica gel with a methylcellulose outer-surface and a 2-(4-sulfophenyl) ethyl phase inner-surface. The MC-SCX precolumn was evaluated by direct analysis using pyridoxine, atenolol and sulpiride spiked...

A novel methylcellulose-immobilized reversed-phase pretreatment column (MC-ODS) for column switching liquid chromatography-mass spectrometry (LC-MS) was investigated to improve recovery and durability. Pretreatment and analytical conditions were optimized so that high throughput and high selectivity was ensured during mass spectrometric analysis. A...

We evaluated a new restricted access media (RAM) precolumn for direct analysis of drugs in plasma using a column switching HPLC system. The new RAM material was prepared by the modification of the external surface of porous silica with hydrophilic methylcellulose (MC), followed by modification of the internal surface with octadecylsilane (ODS). The...