David Bastin

• Engineer at University of Liège

The current work reports on a new approach for copper bioleaching from Printed Circuit Board (PCB) by moderate thermophiles in a rotating-drum reactor. Initially leaching of PCB was carried out in shake flasks to assess the effects of particle size (-208μm+147μm), ferrous iron concentration (1.25-10.0g/L) and pH (1.5-2.5) on copper leaching using m...

This study examines the leaching of copper from waste electric cables by chemical leaching and leaching catalysed by Acidithiobacillus ferrooxidans in terms of leaching kinetics and reagents consumption. Operational parameters such as the nature of the oxidant (Fe3+, O2), the initial ferric iron concentration (0–10 g/L) and the temperature (21–50 °...

Since the early seventies high chromite and low base metal sulphide (BMS) contents of the UG2 reef imposes technological challenges to mineral processors and extractive metallurgists. Forty years later, particle size distribution and size by size mineralogy are considered as key factors to the continuous improvement of the UG-2 ore metallurgy. With...

The leaching step of an integrated hydrometallurgical process for the selective recovery of metals from polymetallic concentrates has been investigated. This concentrate has been produced by physical treatment of Fine Shredder Residues derived from a shredding plant processing a mixed feed of metallic scraps, waste electric equipments and end-of-li...

Results from the solvent extraction of copper and zinc from pregnant solutions after bioleaching of re-floated tailings from the Kipushi concentrator in DR of Congo are presented. LIX984N has been used as extractant for copper, while D2EHPA as such for zinc, following prior removal of the ferric iron via precipitation. The McCabe-Thiele diagrams co...