CARLA ESTORILIO

• PhD
• Senior Researcher at Federal University of Technology of Paraná

The competitive market, the need for customers and the environmental pressures stimulate the search for innovative products. After all, the current state of the planet has been stimulating companies and individuals to pursue practices that contribute to environmental sustainability. In this respect, the topics related to the process of product deve...

Topology optimization (TO) is a mathematical method that optimizes a part’s layout, maintaining the project’s spatial constraints, considering loads, boundary conditions, and manufacturing to maximize its performance. Through mesh analysis, non-essential areas in the structure are identified, allowing efficient material removal without compromising...

Venture Builders are a relatively new phenomenon that addresses the challenges of creating and nurturing start-ups by relying on well-structured ideation and validation processes that lead to choosing the most promising ones for further development. Although venture builders share some characteristics with accelerators and incubators, they offer a...

Business process management is widely used in companies, essential for its efficiency and consistency. Due to the constant digital transformation occurring in the last decades, many companies have been looking for alternatives to monitor their maturity level properly and then progressively evolve with the necessary changes that need to be adapted....

The development of environmentally sustainable products involves activities related to product design, supplier selection, raw material, production, packaging, distribution, and reverse logistics. All activities must be considered in such a way that environmental limits are respected, for this, alternatives to reduce the consumption of natural reso...

The need for manufacturing companies to control the life cycle of their products is increasing today, as these organizations need to meet great demands and remain competitive in a globalized market. In this context, the stakeholder’s integration, considering all whose are part of the design, is one of the aims of this vision. One of the main parts...

The advancement of computing power, artificial intelligence and machine learning make it possible to generate optimized geometries based on the efforts required in a project or with the objective of reducing mass. In this article, the differences in mechanical strength of a part generated by traditional 3D design, topological optimization and gener...

Export has been a good way to leverage the agroindustry. However, the small Brazilian companies have been facing difficulties with the European Union, considering the requirements for the import of food. This work aims to clarify the requirements and barriers to food exportation from Brazil to Europe. The study presents a review of the internationa...

This paper proposes operational systematics for the design phase, specifically the conceptual design, considering integration with manufacturing variables, promoting the concurrent engineering in the knitted industry. The bibliographic references are analyzed to compose a theoretical framework about models for the product development process (PDP)....

Purpose Although organizations have more data than ever at their disposal, actually deriving meaningful insights and actions from them is easier said than done. In this concern, the main objective of this study is to identify trends and research opportunities regarding data management within new product development (NPD) and collaborative engineeri...

Due to the current and highly competitive industrial scenario, the technology-oriented organizations have been making routine adjustments to the conventional IPDP, in order to seek more profitable business models. Identifying the product functions, as well as its importance - perceived by the consumer - and being able to associate this information...

Assessing the product functions associating them with the manufacturability aspects is crucial to reducing the manufacturing cost. Similarly, delivering project solutions with real costs compatible with the values perceived by the customer becomes a relevant aspect for the success of a launch. Even in a concurrent engineering environment, there are...

Purpose: The purpose of this paper is to analyze the PDP (Product Development Process) maturity level in the food industry to identify the compatibility status of their quality certification and their maturity level.Design/methodology/approach: A bibliographical review was conducted about product development, maturity process, and Capability Maturi...

Food companies have been seeking certification of their Product Development Processes (PDP) as a symbol of quality, however, few are prepared to obtain it. One of the hypotheses is that some companies are not mature enough to obtain this certification and maintain it in the long term. To guarantee the product quality, it is important that all the a...

The search for competitive differentials in current industry has required conceptual changes in new product development processes. In this way, evaluating the product functions and associating them with its manufacturability aspects has been crucial for cost reduction and for obtaining a better balanced of the design regarding the value perceived b...

The search for competitive differentials in current industry has required conceptual changes in new product development processes. In this way, evaluating the product functions and associating them with its manufacturability aspects has been crucial for cost reduction and for obtaining a better balanced of the design regarding the value perceived b...

In an increasingly competitive environment, the quality of the services offered by organizations is a decisive factor to ensure their success. Most of the time, the service can be defined as a series of activities of an intangible nature, occurring through the interaction between the company and the client, and leading to the ownership of something...

The product development process has the following phases: concept, research, analysis, development and launch. At the same time, the supply chain management needs integrations with suppliers, manufacturers and customers. When a company develops a product, it is necessary to link the product development process to the supply chain management and thi...

Nowadays it is possible to identify an interaction between health and engineering areas in order to provide better patient care. In dental implant studies, an interaction between areas makes the success of the surgery not dependent exclusively on the experience of the dental surgeon. Providing subsidies to aid decision-making makes the procedure mo...

Resumo The product development process has phases as concept, research, analysis, develop and launch. The supply chain management needs integration with suppliers, manufacturers, and customers. The goal of this study is to link two topics, product development process, and Supply chain management, aiming to understand how this concept join can becom...

1 INTRODUÇÃO O presente estudo é o resultado da análise do trabalho realizada no Setor de Informação e Internação, pertencente ao Serviço de Arquivo Médico e Estatística (SAME) do Instituto da Criança, do Hospital das Clínicas (HC) do Estado de São Paulo. O início do trabalho buscou situar a organização onde o referido setor está inserido, incluind...

Este trabalho se propõe a contribuir para o entendimento do processo de implantação e implementação da Engenharia Simultânea nas organizações. A Engenharia Simultânea é abordada nesta pesquisa como uma metodologia de trabalho, adotada principalmente no desenvolvimento do produto, utilizada estrategicamente pelas organizações que se pretendem tornar...

XXVIII ENCONTRO NACIONAL DE ENGENHARIA DE PRODUÇÃO

XII ICIEOM - Fortaleza, CE, Brasil, October 9 - 11, 2006

APLICAÇÃO DOS MÉTODOS AV, DFMA E FMEA DE PROJETO EM UM CHUVEIRO ELÉTRICO DE BAIXO CUSTO Paulo Roberto Savelli Ussui (UTFPR) paulo_ussui@hotmail.com Carla Cristina Amodio Estorilio (UTFPR) amodio@utfpr.edu.br Carlos Renato Nogueira Ital (UTFPR) ital_ren ato@yahoo.com.br Este artigo apresenta uma revisão de projeto de um chuveiro elétrico, visand...

Management of Engineering & Technology (PICMET), 2014 Portland International Conference

CONEM 2010

There is a dearth of guidelines for preventing the impacts associated with technology transfer process (TTP). The paper proposes a set of preventive guidelines to minimize this problem between industrial companies in Latin America. The literature on TTP between companies and the variables that affect them is reviewed. Moreover, an exploratory actio...

Considering the need for approval and implementation of projects that enable the strategy of organizations, this paper presents the results of the implementation of a process for project´s selection with technological bias and the need for financial investment in a multinational company in the telecommunications industry. During this study the stag...

The development of textile industry products has shown inefficiency due to the lack of an adequate methodology for the process to design. In the development of knitted fabrics, refers to experience of the developers' technicians, without attending satisfactorily the consumer. Therefore, this paper presents the systematization for the design of knit...

Six Sigma has been used by large companies to improve the performance of their manufacturing processes. However, the interest and the application of this methodology in small-and medium-sized enterprises is something emerging, despite being little widespread in the literature. This article shows the applicability of Six Sigma in a small Brazilian c...

The purpose of this paper is to describe a method to help companies identify the resources needed to provide manufacturing flexibility and meet the demands of their potential consumers while complying with company strategy.

O mercado de móveis de luxo cresce e torna-se mais exigente, demandando qualidade e inovação. Entretanto, os designers tem pouco domínio da preferência dos consumidores. Sendo assim, o objetivo desse estudo é identificar os principais requisitos técnicos a serem incorporados no desenvolvimento de cadeiras de luxo. Para isso, é apresentada uma revis...

Resumo: O setor automotivo é um dos mais arrojados em termos de qualidade, demandando a certificação ISO/TS 16949. Apesar disso, algumas empresas a perdem ou obtêm poucas melhorias por indícios de que não possuam maturidade suficiente para manter essa certificação, nem diretrizes para melhoria contínua. Considerando que o CMMI é um dos métodos de d...

A flexibilidade é uma das características estratégicas nas indústrias de manufatura. Entretanto, faltam recursos capazes de orientar quanto ao nível de flexibilidade ideal para cada caso, atrelado às formas de operacionalização, comprometendo o desempenho do processo. Esse artigo apresenta um método para orientar na escolha dos recursos provedores...

O Seis Sigma vem sendo utilizado por grandes empresas para melhorar o desempenho de seus procesos fabris. Entretanto, o interesse e a aplicação desta metodologia em pequenas e médias empresas é algo emergente, apesar de ser pouco difundido na literatura. Esse artigo mostra a aplicabilidade do Seis Sigma em uma pequena empresa brasileira, explicitan...

A study on the Product Development Process (PDP), the Strategic Planning Process (SPP) and the Blue Ocean Strategy (BOS) has been developed in order to verify the scientific strengths of the BOS and its integration mechanisms into the PDP. The conducted study has been based on an exploratory and qualitative research, a field survey with a company t...

While there are various analyses of technology transfer processes (TTPs) in the literature, there is a dearth of guidelines to help prevent the impacts associated with such processes. TTPs between companies in developed countries and developing countries frequently encounter difficulties, and the process is even more difficult between companies...

Este livro surgiu a partir da percepção de uma oportunidade. No mercado editorial brasileiro, existem várias obras que versam sobre a gestão do desenvolvimento de produtos. Porém, estas obras tendem a abordar o tema em níveis de abstração relativamente altos e a concentrar-se muito mais nos “o ques” do que nos “comos”. Reconhece-se que estabelecer...

The Failure Mode and Effect Analysis (FMEA) is a requirement for ISO/TS 16949. However, researches show nonconformities in its use by automotive suppliers. The objective of this study is to identify these nonconformities, aiming to suggest methods for minimizing this problem. Therefore, questionnaires were applied in seven automotive suppliers and,...

Esse artigo apresenta uma revisão do projeto de uma pistola aplicadora de silicone através da aplicação de três métodos: AV (Analise de Valor), DFMA (Design for Manufacturing and Assembly/Projeto para Fabricação e Montagem) e FMEA (Failure Mode and Effect Analysis/Analise dos Modos de Falha e seus Efeitos), visando melhorar os custos e a qualidade...

Purpose – The purpose of this paper is to describe a method to help companies identify the resources needed to provide manufacturing flexibility and meet the demands of their potential consumers while complying with company strategy. Design/methodology/approach – The literature related to flexibility is reviewed and a classification based on the f...

Purpose – Use of failure mode and effect analysis (FMEA) is a requirement of ISO/TS 16949. However, research has shown that there are inconsistencies in the way the technique is applied in automotive suppliers. The aim of this study is to identify these irregularities and to propose a strategy to minimize them. Design/methodology/approach – Questi...

A great difficulty regarding the management of information systems is the fact that much of the knowledge available within organisations can only be found in a non-structured form. Consequently, one of the major problems faced by industry is the low degree of interoperability (capacity that a system presents of sharing and interchanging information...

Resumo: A Análise do Modo e Efeito da Falha (FMEA, Failure Mode and Effect Analysis) é um dos requisitos exigidos pela ISO/TS 16949. Entretanto, pesquisas mostram irregularidades no seu desenvolvimento, por parte dos fornecedores das automotivas. O objetivo desse estudo é identificar essas irregularidades, visando sugerir meios para minimizar esse...

Esse artigo apresenta uma revisão de projeto de um motor a diesel fabricado em Curitiba, visando reduzir custos de fabricação e montagem com o objetivo de torná-lo economicamente viável. O trabalho apresenta uma breve revisão sobre desenvolvimento de produto e recursos de apoio ao projeto de produto industrial, detalhando o método DFMA (Design for...

Summary form only given. This paper refers to a study on the literature available on concurrent engineering (CE) (considered as a work methodology, strategically utilized on the process of product development by enterprises willing to stay or become competitive), and analyzes results from the survey carried out to verify its main concepts, the meth...

The following thesis is based on a project commissioned by ENTERPRISE X (EX) to investigate their new product development process (NPD) with the aim of initiating changes to reduce their time-to-market. The team resided in the company for a duration of eight weeks. We took this approach to gain maximum involvement from the EX staff, to enhance the...

O artigo procura enfocar, de forma sintética, as principais mudanças que estão ocorrendo, nos anos recentes, no ambiente de negócios, frente às quais as empresas brasileiras (e particularmente as paranaenses) estão sendo expostas. Aborda, sucessivamente, as modificações no macroambiente geral, no ambiente operacional externo à empresa e no ambiente...

Resumo: Este artigo descreve a aplicação prática de três métodos em conjunto: a AV (Value Analysis ou Análise de Valor), o DFMA (Design for Manufature and Assembly ou Projeto para Manufatura e Montagem) e o FMEA de projeto (Failure Mode and Effect Analysis ou Análise dos Modos de Falha e Seus Efeitos abrir e fechar a tábua. Palavras-chave: Análise...