Buland Dizayi

Salahaddin University - Erbil | SUH · Department of Mechanical Engineering

Fuel characteristic and exhaust particulate emissions tests were carried out for a EURO5 compliant Heavy Duty Vehicle operating on both pure petroleum diesel (PD) and used cooking oil (C2G Ultra Biofuel) PD blends under real world driving conditions. Fuel tests showed that fuel temperature, substitution ratio and engine speed play a key role in det...

To maximize CO2 reduction, refined straight used cooking oils were used as a fuel in Heavy Goods Vehicles (HGVs) in this research. The fuel is called C2G Ultra Biofuel (C2G: Convert to Green Ltd) and is a fully renewable fuel made as a diesel replacement from processed used cooking oil, used directly in diesel engines specifically modified for this...

Air quality issues and Real Driving Emissions (RDE) in urban areas of cities Factors that influence RDE. Experimental equipment HDD truck RDE test for Euro V with SRC

The current project represents the first attempt to test the environmental performance of the direct utilisation of purified used cooking oil as a fuel in a heavy goods vehicle under real world driving conditions. The properties of the used cooking oil were different from those of petroleum diesel (PD) standards however, its heat value, carbon foot...

To maximize CO2 reduction, refined straight used cooking oils were used as a fuel in Heavy Goods Vehicles (HGVs) in this research. The fuel is called C2G Ultra Biofuel (C2G: Convert to Green Ltd) and is a fully renewable fuel made as a diesel replacement from processed used cooking oil, used directly in diesel engines specifically modified for this...

To maximize CO2 reduction, refined straight used cooking oils were used as a fuel in Heavy Goods Vehicles (HGVs) in this research. The fuel is called C2G Ultra Biofuel (C2G: Convert to Green Ltd) and is a fully renewable fuel made as a diesel replacement from processed used cooking oil, used directly in diesel engines specifically modified for this...

Fuel characteristic and exhaust particulate emissions tests were carried out for a EURO5 compliant Heavy Duty Vehicle operating on both pure petroleum diesel (PD) and used cooking oil (C2G Ultra Biofuel) PD blends under real world driving conditions. Fuel tests showed that fuel temperature, substitution ratio and engine speed play a key role in det...

Fuel injection systems in modern diesel engines are designed and built to comply with very stringent environmental standards. They should also meet the highest level of fuel economy. Drivability, rapid response and easy and accurate control are a common demand. Changing the fuel characteristics could affect the performance of the fuel injection sys...

In order to improve energy supply diversity and reduce carbon dioxide emissions, sustainable bio-fuels are strongly supported by EU and other governments in the world. While the feedstock of biofuels has caused a debate on the issue of sustainability, the used cooking oil (UCO) has become a preferred feedstock for biodiesel manufacturers. However,...

A cold start Euro 3 1.8 litre Diesel vehicle with an oxidation catalyst was used to investigate real world exhaust emissions over a driving cycle that included urban cold start congested traffic driving conditions. The aim was to identity those aspects of cold start real world driving responsible for higher emissions than in test cycles. Higher rea...