Benjamin Martin-Biedma

University of Santiago de Compostela | USC · Department of Stomatology

Objectives This web-based survey, conducted across multiple countries, sought to explore the factors that impact the decision-making of clinicians when it comes to managing defective direct restorations. Methods A survey consisting of 14 questions was sent out to dentists in 21 countries through various online platforms. The survey consisted of tw...

Background Gutta-percha (GP) combined with an endodontic sealer is still the core material most widely used for tridimensional obturation. The sealer acts as a bonding agent between the GP and the root dentinal walls. However, one of the main drawbacks of GP core material is the lack of adhesiveness to the sealer. ZnO thin films have many remarkabl...

Objectives When dental practitioners encounter a defective restoration, they are faced with a crucial decision whether to repair or replace it. This study aims to explore international preferences for repair procedures and the clinical steps taken during the repair process. Method An 11-question survey was distributed to dentists across 21 countri...

The dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone-beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating the pulp chamber volume of the upper ce...

Background: Performing an appropriate Class II direct restoration is a great challenge. The correct selection of the matrix system and the elements used for its stabilization will have a great impact on the result. The aim of this study is to show a new digital method for a predictable selection of the wedge and compare it with the conventional met...

Dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating pulp chamber volume of upper central inciso...

The carotid body is a major peripheral chemoreceptor that senses changes in arterial blood oxygen, carbon dioxide, and pH, which is important for the regulation of breathing and cardiovascular function. The mechanisms by which the carotid body senses O2 and CO2 are well known; conversely, the mechanisms by which it senses pH variations are almost u...

PIEZO1 and PIEZO2 are essential components of mechanogated ion channels, which are required for mechanotransduction and biological processes associated with mechanical stimuli. There is evidence for the presence of PIEZO1 and PIEZO2 in teeth and periodontal ligaments, especially in cell lines and mice, but human studies are almost nonexistent. Deca...

Aim Several factors influence the condition of the periapical tissues associated with root filled teeth. The primary objective of this study was to retrospectively evaluate the extent and speed of bone healing of large periapical lesions associated with nonsurgical root canal treatment or retreatment. The secondary objective was to analyse the rela...

The carotid body is a major peripheral chemoreceptor that senses changes in arterial blood oxygen, carbon dioxide, and pH, what is important for regulation of breathing and cardiovascular function. The mechanisms by which the carotid body senses O2 and CO2 are well known; conversely, the mechanisms by which it senses pH variations are almost unknow...

Composite discoloration is considered one of the most significant disadvantages of dental restorations. The purpose of our study was to assess the color susceptibility of two esthetic composite filling materials, microhybrid composite (ValuxTM Plus) and nanohybrid composite (FiltekTM Z250 XT), to different solutions and compare the results among di...

The objective of this study was to analyze the proprioceptive innervation of human lips, especially of the orbicularis oris muscle, since it is classically accepted that facial muscles lack typical proprioceptors, that is, muscle spindles, but recently this has been doubted. Upper and lower human lips ( n = 5) from non‐embalmed frozen cadavers were...

This study aimed to evaluate by microCT the preparation of the artificial teeth (ATs), TrueTooth®, versus natural teeth (NTs): (1) the time and number of pecking movements needed for preparation; (2) the root canal volume increase; (3) if the pulp-colored medium has any effect on the 3D analysis. Material and Methods: Artificial and natural maxilla...

The BOPT technique (Biologically Oriented Preparation Technique) was proposed by Loi et al. (1) and has become a popular form of vertical preparation for complete crowns with promising results. In this procedure, the clinician can operate on the gingival tissue during preparation and modify its structure in thickness and height by adding modificati...

Background: The purpose of this study was to examine the attitudes and practices of endodontists and paediatric dentists regarding RET. Material and methods: A survey was conducted among endodontists and paediatric dentists from 13 countries. A number of factors were evaluated, including frequency of RET application, followed guidelines, disinfecti...

Dens Invaginatus (DI) or dens in dente is an uncommon anomaly which mostly affects permanent lateral incisors, and it is very rare in molars. This article presents the conservative endodontic management of four different cases of DI and a discussion of the endodontic literature for this malformation. Three upper lateral incisors Type II, IIIa and I...

Estimation of children's chronological age is highly important in human and forensic sciences. The Demirjian method has been reported as accurate for this purpose. The literature review shows some evidence that the accuracy of estimating chronological age via the Demirjian standards is not a straightforward process. The objective of this research i...

Three-dimensional printing offers possibilities for the development of new models in endodontics. Numerous studies have used 3D-printed teeth; however, protocols for the standardization of studies still need to be developed. Another problem with 3D-printed teeth is the different areas of literature requested to understand the processes. This review...

The present study aims to evaluate and contrast the function of the rotational speed of NiTi alloy endodontic rotary files on how resistant they are to dynamic cyclic fatigue. Methods: A total of 150 NiTi alloy endodontic rotary files with similar geometrical design and metallurgical properties were randomly divided into study groups: Group A: 20...

Clinicians should be aware of all the characteristics and capacities of the instruments that are possible to use when conducting a root canal treatment. The wide variety of nickel–titanium (Ni-Ti) rotary systems on the market and the lack of standardisation of this type of instrument makes the choice in each specific case difficult. Therefore, this...

There have been published regenerative endodontic protocols for treating immature teeth in young patients, but there are no clinical considerations for the adult teeth. The goal of the present review is to propose a specific clinical protocol for both mature and immature adult teeth with necrotic pulps. Research was performed from January to April...

The aim of this study was to evaluate the effectiveness of smear layer removal after the use of different irrigation methods (passive ultrasonic irrigation (PUI), continuous ultrasonic irrigation (CUI), apical negative pressure irrigation and conventional irrigation) using scanning electron microscopy (SEM) as an analytical tool. A total of 100 sin...

The aim of this study is to measure the diagnostic interval (DI) of primary extranodal non-Hodgkin lymphomas (PE-NHL) affecting the head and neck and to discover any associated factors. With this aim, we performed a retrospective observational study in northwestern Spain on patients diagnosed between 1 January 2005 and 1 January 2016. A search was...

Background: Dens invaginatus is a dental developmental abnormality caused by an infolding of the enamel organ into the adjacent dental papilla before the calcification of the dental tissues. The clinical presentation of dens invaginatus varies according to its severity, from mild forms, in which we might find a deeper than normal cingulum pit, to...

The aim of this study was to evaluate the effectiveness of smear layer removal after the use of different irrigation methods (passive ultrasonic irrigation [PUI], continuous ultrasonic irrigation [CUI], apical negative pressure irrigation and conventional irrigation) using the scanning electron microscopy (SEM) as an analytical tool. A total of 100...

This study intended to help practitioners selecting the appropriate motion according to their level of expertise for glide path and complete root canal preparation of curved canals in terms of instrument fracture and preparation time. A total of 160 curved root canals (angle >30°, radius <6 mm) were allocated randomly to 4 groups: A/B for expert op...

Objective Subgingival dental restorations and periodontal health have been studied for many years; however, there is a low histological evidence on the behavior of new materials in the supracrestal tissue attachment. The aim of this study is to analyze the periodontal response when a tricalcium silicate material (TSM) or composite margin restoratio...

The aim of this study was to present a new technique for plastic carrier removal in retreatment situations. The gutta‐percha technique that uses plastic carrier obturators is one of the most commonly used; however, removing this core is tedious and time‐consuming. Two clinical cases were performed by an expert in the field of endodontics, to expose...

The aim of this study was to evaluate the efficacy of continuous apical negative ultrasonic irrigation into simulated lateral canals and the apical third in straight and curved root canals. Two simulated lateral canals were created 2, 4 and 6 mm from the working length in 120 single-rooted teeth (6 canals/tooth, n = 360 straight, n = 360 curved). T...

Introduction The aim of this study was to evaluate the influence of rotary (ProTaper Next [PTN; Dentsply Maillefer, Ballaigues, Switzerland] and ProTaper Gold [PTG, Dentsply Maillefer]) and reciprocating (WaveOne Gold [WOG, Dentsply Maillefer]) systems in dentinal microcrack generation after the preparation of curved root canals using micro–compute...

Cusp fractures occur frequently in endodontically treated teeth with large restorations and no cusp protection. These fractures often lead to challenging clinical decisions, such as whether to undertake complex restorative management or extraction of the affected teeth. This article reports the surgical and restorative management of two teeth with...

Introdução: a tomada de decisão entre realizar ou não a extração de um dente com prognóstico duvidoso é comum na clínica diária. Para tomar a decisão adequada, devemos levar em consideração diversos fatores, como o prognóstico endodôntico, periodontal e restaurador, assim como fatores baseados no tipo de paciente, suas expectativas, hábitos de higi...

Surgical extrusion should be considered as an alternative treatment in patients with structurally compromised teeth that retain coronal integrity and have favorable root anatomy. The procedure described is straightforward and can be performed quickly. A situation in which it was used to treat a maxillary premolar with substantial structural loss bu...

Background The aim of this study was to evaluate the fracture and defects observed in ProTaper Next files discarded after a normal clinical use. Material and Methods 571 ProTaper Next rotary instruments were collected after clinical use from the clinic of endodontics over 12 months. The length of the files was measured using a digital caliper to d...

Anterior teeth with subgingival fractures require a complex treatment plan that addresses biologic, functional and aesthetic factors. This case report describes the management of a crown-root fractured maxillary left central incisor. An interdisciplinary approach was used to restore the tooth due to the complex nature of the treatment. Orthodontic...

Background One of the causative factors of root defects is the increased friction produced by rotary instrumentation. A high canal curvature may increase stress, making the tooth more susceptible to dentinal cracks. The purpose of this study was to evaluate dentinal micro-crack formation with the ProTaper NEXT and ProTaper Universal systems using L...

The restoration of endodontic tooth is always a challenge for the clinician, not only due to excessive loss of tooth structure but also invasion of the biological width due to large decayed lesions. In this paper, the 7 most common clinical scenarios in molars with class II lesions ever deeper were examined. This includes both the type of restorati...

Background The technique of alternating rotation has been used with NiTi rotary instruments to increase the resistance to fracture compared with conventional continuous rotation. However, it is still not clear what type of instrumentation could provide better results in the preservation of the original canal anatomy. Aim The aim of this study is t...

Background: Irrigation of the root canal system is an essential step in the endodontic treatment. The aim of this article is to introduce continuous apical negative-pressure ultrasonic irrigation (CANUI), a new irrigation concept, and compare the characteristics of this new technique with current devices for activating the irrigant. Material and Me...

Objectives: identify by polymerase chain reaction technique ten bacterial species obtained from necrotic root canals, and analyze their association with signs and symptoms of apical periodontitis (pain, exudate and mobility) in a specific geographic area: Santiago de Compostela (northwestern Spain). Methods: a descriptive study was conducted based...

Background The efficacy of endodontic irrigation procedures can be compromised by the complexity of the root canal system. Delivering irrigants to the apical third of curved canals presents a particular challenge to endodontists. This study compared the effects of two ultrasonic irrigation techniques on the penetration of sodium hypochlorite into t...

A palatogingival groove is a developmental anomaly that predisposes the involved tooth to develop a severe periodontal lesion. These grooves often present a clinical challenge because diagnosis and treatment planning require an interdisciplinary approach. This case report describes the successful management of a right maxillary lateral incisor with...

Introduction: Radix entomolaris presents with an unusual morphology and is a rare occurrence. It is mainly observed in mandibular first molars. The incidence varies in different populations but it is far from common. This is especially true for mandibular second molars which possess the lowest prevalence. Some case reports have shown the presence...

Recently, filling materials have been introduced based on the dentine adhesion technologies used in conservative dentistry in an attempt to seal the root canal more effectively. The purpose of this study was to investigate the interface between the canal and root-filling material. Sealing ability of four root canal obturation methods was analysed b...

Background: Laser irradiation has been introduced in endodontic treatment due to its bactericidal effect. The aim of this study is to evaluate the bactericidal efficacy of a 940 nm diode laser alone or in combination with 5% sodium hypochlorite (NaOCl) against mature biofilms of E. Faecalis. Methods: Sixty-eight (60 for the three groups, 4 for SEM...

Complete endodontic system disinfection requires the removal of vital and necrotic pulp tissue, microorganisms, and toxins. The purpose of this study was to compare the effects of 2 ultrasonic irrigation techniques on the penetration of sodium hypochlorite into the main canal and simulated lateral canals of extracted teeth. Two simulated lateral ca...

This in vitro study compared the tooth color and the ultrastructure of internal dental tissues before and after internal bleaching. Sodium perborate was placed in the pulp chamber of endodontically treated molars and sealed with intermediate restorative material. The test samples were stored in a physiologic solution, and the bleaching agent was re...

Rotary nickel-titanium instruments have multiple advantages but with the risk of more fractures because of flexure or torsion. Alternating rotation appears to be an alternative to continuous rotary movement. The objective of this study was to determine the influence of the type of instrument rotation on the frequency of fractures or deformation. In...

To evaluate the corrosion resistance of nickel-titanium (NiTi) endodontic rotary instruments immersed in 5.25% sodium hypochlorite (NaOCl) solution. The corrosion performance of NiTi instruments (S1 25 mm, ProTaper Dentsplay Maillefer, Ballaigues, Switzerland) was evaluated using commercial 5.25% NaOCl solution (pH = 12.3), and the same solution pa...

The aim of this study was to compare the scanning electron microscopic (SEM) morphology of root canal walls instrumented manually and mechanically with and without the application of Er:YAG laser. Single-rooted, human, extracted teeth were cut at the cementoenamel junction. The teeth were divided into four groups: teeth that were simply instrumente...

The dual purpose of this study was, to evaluate the fracture rate of Ni-Ti rotary instruments when following a manual glide path and using stainless steel hand files before carrying out instrumentation by means of rotary files and, to compare the results in this study with those obtained in two previous analyses, in which the glide path technique w...

It is difficult to determine the existence of a normal or physiological masticatory cycle, because there exists great individual diversity. This study presents some data about two parameters of masticatory cycles according to the frontal plane, i.e. the area and length of right-sided and left-sided cycles in a group of 30 young people, 18 women and...

To describe the craniofacial morphology of a group of patients with Down's syndrome using a cephalometric analysis of the lateral skull radiograph. The studied sample consisted of 39 patients with Down's syndrome (24 boys, 15 girls) ranging from 7 to 18 years of age. The computerized cephalometric study of the lateral skull radiograph of each patie...

The purpose of this study was to use scanning electron microscopy (SEM) in order to compare the surfaces of cavities prepared using laser with those prepared conventionally, and to measure the degree of leakage through both enamel and cementum. We prepared 135 class V cavities and divided them randomly into three groups: laser-treated (group A), la...

Objectives: The aim of this study was to compare the tooth shade and the internal dentin ultra structure, before and after internal bleaching. Methods: Nine extracted human lower molars were submitted to endodontic treatment and sectioned in two halves, in such a manner that control and test sides were obtained from the same tooth. The test sides o...