Bence Jáger

Bence Jáger
Budapest University of Technology and Economics · Department of Structural Engineering

Doctor of Engineering

About

25
Publications
3,382
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
241
Citations
Additional affiliations
February 2015 - present
Budapest University of Technology and Economics
Position
  • PhD Student

Publications

Publications (25)
Article
There is no commonly accepted and reliable design method to determine the lateral–torsional buckling (LTB) resistance of steel trapezoidally corrugated web girders. Therefore, the focus of the current paper is on the investigation of this failure mode, detailed evaluation of the structural behavior and determination of the accurate LTB resistance....
Article
Current standards and specifications do not provide specific design methods to determine the lateral-torsional buckling (LTB) strength of girders with trapezoidally corrugated web. In the international literature there are some previous investigations available focusing on the LTB strength of corrugated web girders. Based on numerical calculations...
Article
The application of steel trapezoidal corrugated web in steel-concrete composite girders has been widespread in building structures and has also appeared in bridges for a few decades, due to their advantageous mechanical properties. Embedding the trapezoidal web in the concrete slab leads to additional advantages such as omitting the welds of the to...
Article
In this paper the lateral-torsional buckling (LTB) behavior of steel trapezoidally corrugated web girders is studied by advanced nonlinear finite element (FE) analysis in order to develop new computer-based design method for the determination of the LTB strength of such innovative members subjected to pure bending. Due to the low number of previous...
Article
Full-text available
Traditionally in steel‐concrete composite bridges, the structural elements with different materials are work together with headed stud shear connectors welded to the top flange of the steel beam. The application of trapezoidal corrugated web embedded in the concrete slab provides an alternative for steel‐concrete composite and hybrid structures, ho...
Article
Steel I-girders with slender web are commonly used in the engineering practice. Previous research results proved that the current bending and shear interaction (M-V) check of the EN1993-1-5 does not always provide safe side resistance. The current research work focuses on the analysis of the M-V interaction behavior of longitudinally unstiffened an...
Conference Paper
Current standards and specifications do not provide design methods to determine the lateral-torsional buckling (LTB) strength of girders with trapezoidally corrugated web. In the international literature there is only a limited number of previous investigations available focusing on the LTB strength of corrugated web girders. Based on numerical cal...
Conference Paper
Full-text available
Steel corrugated web girders are increasingly used in buildings, industrial halls and bridges due to their well-known advantages. Numerous researchers highlighted and studied the advantages and favorable properties of the trapezoidally corrugated web girders in the past. However, there are only a limited number of available design proposals for the...
Article
Full-text available
The oldest and most precise way to determine the curvatures of the spine is two directional X-ray measurement from the sagittal and coronal planes. By using X-ray, patients are exposed to radiation, which limits the repeatability of the measurements even in serious deformities, thus X-ray is not applicable for frequent monitoring. Therefore new alt...
Article
Full-text available
Background and purpose The most common and gold standard method to diagnose and follow-up on scoliosis treatment is to capture biplanar X-ray images and then use these to determine the sagittal frontal spinal curvature angles by the Cobb method. Reducing exposure to radiation is an important aspect for consideration, especially regarding children....
Conference Paper
Hybrid girders with corrugated web are increasingly used in bridge engineering due to its numerous favorable properties. For the web-to-slab connection different layouts have been developed in the past, however, just a few design proposals can be found in the international literature for the determination of the connection’s resistance, especially...
Conference Paper
Steel girders with trapezoidally corrugated web are widely used structural members in the civil engineering praxis due to their favorable behavior. The stress distributions and the bending-shear interaction of trapezoidally corrugated web girders have been already investigated in the case of compact flanges. Furthermore, the flange buckling behavio...
Article
Steel I-girders with longitudinally stiffened webs are commonly used in the civil engineering praxis, especially in bridges. These structures have usually longitudinal stiffeners on the webs, therefore the determination of the load carrying capacity of girders with longitudinally stiffened webs under the combined loading situation (interaction of b...
Article
Girders with trapezoidally corrugated web are widely used structural elements in the civil engineering praxis due to their numerous advantages. However, there is a relatively small number of previous investigations focusing on the determination of the flange buckling resistance of the corrugated web girders. Previous experimental and numerical inve...
Article
Girders with trapezoidally corrugated web are widely used structural elements in the civil engineering praxis due to their numerous advantages. Despite, there are a relatively small number of previous investigations focusing on the determination of the bending moment resistance and the flange buckling behavior. Previous experimental and numerical i...
Article
Application of the corrugated web girders has been widely spread due to their numerous advantages in the field of bridges and buildings in the civil engineering praxis. This girder type has a special stress distribution and buckling behavior compared to conventional steel I-girders. Despite, there are a relative small number of previous investigati...
Article
Longitudinally unstiffened steel I-girders are commonly used structural elements in the engineering practice. Previous research results proved that the current design method of the EN1993-1-5 EN 1993-1-5 (2005) for M-V interaction check is not always on the safe side for longitudinally stiffened girders, however a systematic review of the M-V inter...
Article
Steel corrugated webs are likely used in the field of bridges in the last few decades due to their numerous advantages. The most favorable layout is the hybrid girder with upper and lower reinforced concrete slabs and with steel corrugated webs. During incremental launching – without concrete flanges – the steel girder can be subjected by the combi...
Conference Paper
Full-text available
Steel girders with trapezoidally corrugated webs are increasingly used in the field of bridges, especially in case of hybrid and composite bridges. During incremental launching of the bridge the main girders are subjected to bending moment (M) with accompanying shear (V) and transverse forces (F) in the same cross-section, which can result in a cou...
Article
Girders with corrugated steel web is likely used in bridges as well as in building structures due to its numerous favourable properties. It is known from previous investigations that due to the web corrugation the normal and shear stress distribution in the flange and web plates of the corrugated web girders are different from the stress distributi...
Article
Steel girders with corrugated webs are increasingly used in the field of bridges, especially in case of composite bridges. During launching of a bridge structure the girder can be subjected by the combination of bending moment (M), shear (V) and transverse forces (F) which result in a complex stress field in the girder and in an interacting stabili...
Conference Paper
The oldest and most accurate way of determining the shape of the spine is to make X-rays from two different angles, which can be performed once a year even in serious diseases, due to its high radiation exposure. However, in case of a conservative treatment of spinal disorders, continuous monitoring is necessary, thus different in-vivo methods are...
Article
The corrugated steel plate is a widely used structural element in many fields of application because of its numerous favorable properties. Due to the web corrugation the normal and shear stress distribution in the flange and web plates are different from the stress distribution of the conventional I-girders under in-plane bending and shear. The foc...

Network

Cited By

Projects

Project (1)