Bahaa Aldin Hasan- Doctor of Automotive Engineering
- Head of Department at Middle Technical University,The Technical Institute of Suwairah
Bahaa Aldin Hasan
- Doctor of Automotive Engineering
- Head of Department at Middle Technical University,The Technical Institute of Suwairah
About
5
Publications
401
Reads
How we measure 'reads'
A 'read' is counted each time someone views a publication summary (such as the title, abstract, and list of authors), clicks on a figure, or views or downloads the full-text. Learn more
18
Citations
Introduction
Bahaa Aldin Hasan was working at E.ON UK ENERGY UK. Bahaa Aldin does research in Design, Automotive Engineering, Brakes, Friction materials, Composite Materials, Extrusion, Manufacturing, Tolerance, and Passenger Lifts.
Now working at Middle Technical University, Technical Institute of Suwairah, Iraq.
Current institution
Middle Technical University,The Technical Institute of Suwairah
Current position
- Head of Department
Publications
Publications (5)
Abstract
In this study, the adhesion strength, liberated energy, and elongation ratio were found for automotive brake friction material reinforcing fibres using epoxy and polyester resin reinforced with carbon, Kevlar, and glass fibres separately in different samples with a volume ratio of 2.9%. The directions of fibres were taken in three angles 0...
div>A rear underrun protection device (RUPD) plays a fundamental role in reducing the risk of running a small car beneath the rear or the side of a heavy truck because of the difference in structure heights in the event of a vehicle collision. Even in cars with five-star safety ratings, crashing into a truck with poorly designed RUPD results in a p...
In automotive applications, replacing heavy and expensive materials with light and cheap natural fiber leads to noise reduction, strength enhancement and fuel management. Enhancing the absorption of energy, controlling the failure style of composite thin shell tube and utilizing it instead of thin-walled steel columns in vehicle structural parts ca...
![Compositions of produced samples Fibre material and embedded length [mm]](profile/Hisham-Hasan-3/publication/360001356/figure/tbl1/AS:1145597201526784@1650143065464/Compositions-of-produced-samples-Fibre-material-and-embedded-length-mm_Q320.jpg)
Many studies around the world focus on the use of organic and inorganic additions to polymer composites to enhance their mechanical properties. Investigations were conducted to study the mechanical properties of composites with nano-kaolinite weight fractions of 1, 3, 5, 7, and 12% incorporated into an epoxy matrix. Further investigations were carr...
In this paper, the Power system stabilizer (PSS) and (PID) are enhanced with a Chaotic Particle Swarm Optimization (CPSO) Damping Controller in order to suppression the Low-Frequency Oscillations (LFO) in a Single Machine Infinite Bus (SMIB) power system. Chaotic particle swarm optimization (CPSO) is used to tune the parameters of the PSS-PID. The...
